A problem caused this program to stop interacting with windows

Неправильный путь приложения: C:Windowsexplorer.exe

Привет всем! Помогите!
Перезагружается проводник.
Описание
Stopped working
Неправильный путь приложения: C:Windowsexplorer.exe

Сигнатура проблемы
Имя проблемного события: APPCRASH
Application Name: explorer.exe
Application Version: 6.1.7601.17567
Application Timestamp: 4d672ee4
Fault Module Name: ntdll.dll
Fault Module Version: 6.1.7601.17725
Fault Module Timestamp: 4ec4aa8e
Exception Code: c0000005
Exception Offset: 00000000000532d0
Версия ОС: 6.1.7601.2.1.0.768.3
Код языка: 1049

Дополнительные сведения о проблеме
Код черпака: 52534511

Неправильный путь приложения: C:WindowsSystem32SearchIndexer.exe
Здравствуйте! Помогите, пожалуйста, кто — чем сможет. Ещё не сталкивался с таким. За сегодня уже.

Неправильный путь приложения
Описание Неправильный путь приложения: C:RstrLinkWebBinAppMIWSLauncherHighest.exe Сигнатура.

Windows 7 + explorer.exe
Всем привет. Надеюсь на помощь в решении следующей проблемы: Windows 7 (x86), постоянно после.

Ошибка в WINDOWS 7-EXPLORER.EXE
Подскажите, при выходе из windows 7,появляется explorer.exe какая то ошибка со звуком,и потом идет.

Причиной сбоя могут быть несовместимые с Windows 7 версии браузера Mozilla Firefox. Позже выяснилось, что некоторые другие несовместимые с Windows 7 программы вызывают эту же ошибку. После удаления несовместимой программы (или программ) все ошибки модуля ntdll.dll исчезают.

Таким образом, единственное решение: выявить и деинсталлировать несовместимую программу.

Чтобы выявить проблемную программу, нужно деинсталлировать все программы, оставить только ОС. Затем на «чистую» систему устанавливать в день по одной программе и внимательно следить за работой системы (активно ей пользоваться). Если проводник начинает перезапускаться, то установленная программа несовместима с Windows 7.

1) драйверы тоже являются программами и тоже могут быть несовместимы с Windows 7. Следовательно, драйверы тоже могут приводить к сбою проводника;

2) если производитель программы утверждает, что его продукт полностью совместим с Windows 7, это не является гарантией совместимости.

3) разные версии одних и тех же программ могут быть как совместимы с Windows 7, так и несовместимы. Более новая версия – не всегда значит «более совместимая». Яркий пример, когда старая версия программы работала в Windows 7 корректно, а новая вызывала ошибки – Firefox (ошибку вызывал Firefox 3.5.x, а предыдущие версии 3.0.x работали в Windows 7 корректно).

Этот способ выявления несовместимой программы займет несколько суток или даже недель. Но другого способа нет.

Да,лежит именно в том месте (в папке C:Windows)

Помощь в написании контрольных, курсовых и дипломных работ здесь.

Источник

A problem caused this program to stop interacting with windows неправильный путь приложения

Please find here attached problem signature below:

Application Name: iexplore.exe

Application Version: 9.0.8112.16421

Application Timestamp: 4d76255d

Hang Signature: 9438

OS Version: 6.1.7601.2.1.0.768.3

Additional Hang Signature 1: 9438b06f80eee44f14c0c2527a2a78e6

Additional Hang Signature 2: f1ab

Additional Hang Signature 3: f1ab978c5eb557549098af6a29c6d5c8

Additional Hang Signature 4: 9438

Additional Hang Signature 5: 9438b06f80eee44f14c0c2527a2a78e6

Additional Hang Signature 6: f1ab

Additional Hang Signature 7: f1ab978c5eb557549098af6a29c6d5c8

Problem Event Name: AppHangB1

Answers

This issue can be caused by several reasons such as program conflict, incompatible drivers and third party add-ons. To troubleshoot this, please perform the following steps:

First, please update BIOS and device drivers to the latest version.

Second, run system Clean Boot mode.

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

If this issue persists, please reset Internet Explorer

Источник

A problem caused this program to stop interacting with windows неправильный путь приложения

Вопрос

Please find here attached problem signature below:

Application Name: iexplore.exe

Application Version: 9.0.8112.16421

Application Timestamp: 4d76255d

Hang Signature: 9438

OS Version: 6.1.7601.2.1.0.768.3

Additional Hang Signature 1: 9438b06f80eee44f14c0c2527a2a78e6

Additional Hang Signature 2: f1ab

Additional Hang Signature 3: f1ab978c5eb557549098af6a29c6d5c8

Additional Hang Signature 4: 9438

Additional Hang Signature 5: 9438b06f80eee44f14c0c2527a2a78e6

Additional Hang Signature 6: f1ab

Additional Hang Signature 7: f1ab978c5eb557549098af6a29c6d5c8

Problem Event Name: AppHangB1

Ответы

This issue can be caused by several reasons such as program conflict, incompatible drivers and third party add-ons. To troubleshoot this, please perform the following steps:

First, please update BIOS and device drivers to the latest version.

Second, run system Clean Boot mode.

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

If this issue persists, please reset Internet Explorer

Источник

Неправильный путь приложения

Привет всем!
Данная ошибка возникла давно,мирился с ней,но она очень надоела.
Во время игры,игра просто вылетает

Описание
Неправильный путь приложения: C:Program FilesVehicle Simulatorvsf.exe

Сигнатура проблемы
Имя проблемного события: APPCRASH
Имя приложения: vsf.exe
Версия приложения: 2.6.0.0
Отметка времени приложения: 53f359b7
Имя модуля с ошибкой: vsf.exe
Версия модуля с ошибкой: 2.6.0.0
Отметка времени модуля с ошибкой: 53f359b7
Код исключения: c0000005
Смещение исключения: 0017297f
Версия ОС: 10.0.10586.2.0.0.768.101
Код языка: 1061
Дополнительные сведения 1: bdcb
Дополнительные сведения 2: bdcb33e65a9843796b7ec31cc25bda3b
Дополнительные сведения 3: 28b9
Дополнительные сведения 4: 28b92d9a58b4c3292e6786a4023b66af

Дополнительные сведения о проблеме
ИД контейнера: 29fb696c0d1d9b8e5963fca9c282463b (73693471135)

Неправильный путь приложения
Описание Неправильный путь приложения: C:RstrLinkWebBinAppMIWSLauncherHighest.exe Сигнатура.

Неправильный путь приложения: C:Windowsexplorer.exe
Привет всем! Помогите! Перезагружается проводник. Описание Stopped working Неправильный путь.

Неправильный путь приложения: C:WindowsSystem32SearchIndexer.exe
Здравствуйте! Помогите, пожалуйста, кто — чем сможет. Ещё не сталкивался с таким. За сегодня уже.

Помощь в написании контрольных, курсовых и дипломных работ здесь.

Неправильный путь к файлу. Схема не зарегистрирована
Здравствуйте, уважаемые форумчане! УТ 11.1.7.49. При попытке установки последующего.

Поиск по сайту выдаёт неправильный путь
индексация инфоблоков для поиска стоит. Пусть до новости к примеру такой.

После автозагрузки, в реестр прописывается неправильный путь
Здравствуйте. Никак не могу найти решение проблемы. Есть программа, которая узнает папку, где.

Источник

Having a problem with VM Player crashing and getting the following error message:

«A problem caused this program to stop interacting with windows C:Program FilesVMwareWMwarePlayervmplayer.exe«

Host Computer:

Intel Core 2 Duo E7500 2.94GHz

2GB RAM

Seagate Barracuda 7200.12 SATA

3Gb/s 500GB Hard Drive – ST3500418AS

NVIDIA GeForce 8400GS

Optiarc DVD-RW AD-7240S

Realtek RT8168C Dual Gigabit

Ethernet Ports

No Floppy Drive

No Sound Card

Windows 7 Professional – 32bit

VMware Player 3.1.2-301548

VM:

Windows XP Professional SP3

1.5GB RAM

40GB Hard Drive

Bridged Network

It seems to happen when several windows are left open while the system is idle for a period of time and then something is clicked on in the VM.

I am able to run the VM with other systems (one with XP 32-bit, and the other with 7 64-bit) and haven’t been able to replicate the problem. Tried to reinstall VMwarePlayer and that didn’t seem to help either.

Any ideas or log files that I can look at to find the root cause of this issue?

Thanks in advance.

A problem caused this program to stop interacting with Windows.

Welcome to the Microsoft Answers Community!

This can be caused by an add-on that isn’t compatible with Internet Explorer. You can test this with Internet Explorer (No add-ons):

· Click the Start Orb

· Click All Programs

· Click Accessories

· Click System Tools

· Click Internet Explorer (No add-ons)

Test to see if you get the same crash message in No add-ons mode. If not you just have to identify which add-on was causing the crash.

· Click Tools

· Click Manage Add-ons

· Click Toolbars and Extensions

· Under Show: click All add-ons

· Click any add-on

· Press CTRL + A on your keyboard (this should select all add-ons)

· Click Disable all

· Click Close

· Close Internet Explorer (No add-ons)

· Open Internet Explorer

Now all add-ons are disabled in Internet Explorer, next step is to enable them one by one.

· Click Tools

· Click Manage Add-ons

· Click the first disabled add-on

· Click Enable

· Click Close

· Surf a few pages

· Close Internet Explorer

· Open Internet Explorer

When Internet Explorer opens again, test to see if you get the same crash message. If not then the add-on you enabled is good to stay. Repeat the Manage Add-ons process for the next disabled add-on and continue until the crash returns. Then the last add-on enabled will need to be disabled/uninstalled/updated to avoid further problems.

Hope that helps, look forward to hearing back from you.

Steven
Microsoft Answers Support Engineer
Visit our Microsoft Answers Feedback Forum and let us know what you think

36 people found this reply helpful

Was this reply helpful?

Sorry this didn’t help.

Great! Thanks for your feedback.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

Windows Explorer stop interacting with Windows

The program explorer.exe version 10.0.10586.104 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Security and Maintenance control panel.

Process ID: 1164
Start Time: 01d1787ab8cad73b
Termination Time: 0
Application Path: C:Windowsexplorer.exe
Report Id: 2e70536a-e46e-11e5-bf95-8434977bc6d8
Faulting package full name:
Faulting package-relative application ID:

Please note SFC /scannow didnt report any problem

* Please try a lower page number.

* Please enter only numbers.

* Please try a lower page number.

* Please enter only numbers.

Thank you for posting your query on Microsoft Community.

I understand that the file explorer stops responding. We will assist you to resolve the issue.

This issue may arise when some of the Windows components or applications gets corrupted. We will assist you to resolve the issue.

I suggest you to follow the steps provided below and check if it helps to resolve the explorer issue.

1. Press Alt+ctr+Del from Desktop.
2. Select Task Manager.
3. Under process tab, locate Windows Explorer.
4. Right Click Windows Explorer and select End Task.
5. Now select on File tab and click Run Task.
6. Type explorer.exe and press ok.
7. Check if the issue persists.

If the issue persists, I suggest you to perform SFC scan and check if it helps to resolve the issue.

System File Checker (SFC) is a utility in Microsoft Windows that allows users to scan for and restore corruptions in Windows system files. Perform System File Check (SFC), and then check if this fixes the issue.

Press the Windows button + X on your keyboard, a mini dialogue box will appear.
2. Choose Command Prompt (Admin). You must run the command prompt in Administrator level.
3. On the command prompt type sfc /scannow and hit enter.
4. If everything went okay and no errors were found, restart your computer and see if the issue re-occurs.

Hope the information helps. Let us know if you need further assistance. We will be happy to help.

5 people found this reply helpful

Was this reply helpful?

Sorry this didn’t help.

Great! Thanks for your feedback.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this reply?

Thanks for your feedback.

Me too, It keep crashing and crashing!!

there is another forum that talks about reinstalling audio driver http://www.tenforums.com/general-support/15245-file-explorer-keeps-crashing-2.html?s=c1e09a1000762debfad1cbf1547e10ec

But i don’t have that audio drivers on my computer,

SFC /scannow didn’t report any problem, this is clearly a windows 10 bug.

The program explorer.exe version 10.0.10586.104 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Security and Maintenance control panel.
Process ID: 1fc0
Start Time: 01d1972d5ad42947
Termination Time: 0
Application Path: C:Windowsexplorer.exe
Report Id: 4bcf7628-0321-11e6-82ae-00249b13bea2
Faulting package full name:
Faulting package-relative application ID:

4 people found this reply helpful

Was this reply helpful?

Sorry this didn’t help.

Great! Thanks for your feedback.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this reply?

Thanks for your feedback.

This issue might occur due to corrupted or outdated display drivers. Kindly try the below steps and check if this helps.

I suggest you to try updating the Display Adapter drivers check if this helps.

1. Press Windows Key + X key and click Device Manager.

2. Expand ‘Display Adapters’.

3. Right-click on the Display Adapter listed and click on ‘Update Driver Software’.

4. Select the option to automatically search for the updated driver software.

5. Restart the computer after its updated and verify.

Also try to access the computer manufacturer’s website and download the latest display drivers for your computer and install the same.

If the issue still persists, perform Clean Boot and check.

Placing your system in Clean Boot state helps in identifying if any third party applications or startup items are causing the issue. Check this issue in clean boot state.

1. Press Windows key + X key. And select Run.
2. Type msconfig in the Run box and hit Enter.
3. On the Services tab of the System Configuration dialog box, tap or click to select the Hide all Microsoft services check box, and then tap or click Disable all .
4. On the Startup tab of the System Configuration dialog box, tap or click Open Task Manager .
5. On the Startup tab in Task Manager, for each startup item, select the item and then click Disable .
6. Close Task Manager.
7. On the Startup tab of the System Configuration dialog box, tap or click OK , and then restart the computer.

For more information refer the below link.

How to perform a clean boot in Windows

Note: After troubleshooting, refer to this section » How to reset the computer to start normally after clean boot troubleshooting «.

Hope this helps. Please do let us know if you need any further assistance.

The program exe stopped interacting with windows and was closed

This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.

Answered by:

Question

I have Windows 8.1 installed on Dell XPS 8700. Everytime I start the machine(at least 7 out of 10 times), Windows Explorer crashes. This happens only during startup or restart.

The program Explorer.EXE version 6.3.9600.16441 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 780
Start Time: 01cf183af591523d
Termination Time: 0
Application Path: C:WINDOWSExplorer.EXE
Report Id: 398639b9-842e-11e3-be99-3c77e6801d20
Faulting package full name:
Faulting package-relative application ID:

This is the detailed Report from C:UsersMikeAppDataLocalMicrosoftWindowsWERReportArchiveAppHang_explorer.exe_6f5b21bd7e92e1b088ceca7c2d9d8688e363412a_55cc7699_1b5f3ca9report.wer

Version=1
EventType=AppHangB1
EventTime=130349555830958697
ReportType=3
Consent=1
UploadTime=130349555862993455
ReportFlags=524288
ReportIdentifier=398639b8-842e-11e3-be99-3c77e6801d20
IntegratorReportIdentifier=398639b9-842e-11e3-be99-3c77e6801d20
NsAppName=explorer.exe
Response.BucketId=687d258c4064b17a7ae1a2532cfa4663
Response.BucketTable=5
Response.LegacyBucketId=-312032037
Response.type=4
Sig[0].Name=Application Name
Sig[0].Value=explorer.exe
Sig[1].Name=Application Version
Sig[1].Value=6.3.9600.16441
Sig[2].Name=Application Timestamp
Sig[2].Value=5265dec8
Sig[3].Name=Hang Signature
Sig[3].Value=161d
Sig[4].Name=Hang Type
Sig[4].Value=134218241
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.3.9600.2.0.0.768.101
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=1033
DynamicSig[22].Name=Additional Hang Signature 1
DynamicSig[22].Value=161d20f1ebdc53f4b267ad839b4c2215
DynamicSig[23].Name=Additional Hang Signature 2
DynamicSig[23].Value=06e3
DynamicSig[24].Name=Additional Hang Signature 3
DynamicSig[24].Value=06e30efa6c6de73fdc001f02193018cd
DynamicSig[25].Name=Additional Hang Signature 4
DynamicSig[25].Value=12cd
DynamicSig[26].Name=Additional Hang Signature 5
DynamicSig[26].Value=12cdd7423cf5b5c2d75c1d972bf609ef
DynamicSig[27].Name=Additional Hang Signature 6
DynamicSig[27].Value=0519
DynamicSig[28].Name=Additional Hang Signature 7
DynamicSig[28].Value=05191265f91f786581b526cb7a39a7a0
UI[3]=Windows Explorer is not responding
UI[4]=If you restart or close the program, you might lose information.
UI[5]=Restart the program
UI[6]=Restart the program
LoadedModule[0]=C:WINDOWSExplorer.EXE
LoadedModule[1]=C:WINDOWSSYSTEM32ntdll.dll
LoadedModule[2]=C:WINDOWSsystem32KERNEL32.DLL
LoadedModule[3]=C:WINDOWSsystem32KERNELBASE.dll
LoadedModule[4]=C:WINDOWSsystem32apphelp.dll
LoadedModule[5]=C:WINDOWSsystem32msvcrt.dll
LoadedModule[6]=C:WINDOWSsystem32OLEAUT32.dll
LoadedModule[7]=C:WINDOWSSYSTEM32combase.dll
LoadedModule[8]=C:WINDOWSSYSTEM32powrprof.dll
LoadedModule[9]=C:WINDOWSSYSTEM32advapi32.dll
LoadedModule[10]=C:WINDOWSsystem32USER32.dll
LoadedModule[11]=C:WINDOWSsystem32GDI32.dll
LoadedModule[12]=C:WINDOWSSYSTEM32SHCORE.dll
LoadedModule[13]=C:WINDOWSsystem32SHLWAPI.dll
LoadedModule[14]=C:WINDOWSsystem32SHELL32.dll
LoadedModule[15]=C:WINDOWSSYSTEM32UxTheme.dll
LoadedModule[16]=C:WINDOWSSYSTEM32dwmapi.dll
LoadedModule[17]=C:WINDOWSSYSTEM32TWINAPI.dll
LoadedModule[18]=C:WINDOWSSYSTEM32d3d11.dll
LoadedModule[19]=C:WINDOWSSYSTEM32dcomp.dll
LoadedModule[20]=C:WINDOWSSYSTEM32SspiCli.dll
LoadedModule[21]=C:WINDOWSSYSTEM32sechost.dll
LoadedModule[22]=C:WINDOWSSYSTEM32USERENV.dll
LoadedModule[23]=C:WINDOWSSYSTEM32PROPSYS.dll
LoadedModule[24]=C:WINDOWSsystem32RPCRT4.dll
LoadedModule[25]=C:WINDOWSSYSTEM32SLC.dll
LoadedModule[26]=C:WINDOWSSYSTEM32profapi.dll
LoadedModule[27]=C:WINDOWSSYSTEM32dxgi.dll
LoadedModule[28]=C:WINDOWSSYSTEM32sppc.dll
LoadedModule[29]=C:WINDOWSsystem32IMM32.DLL
LoadedModule[30]=C:WINDOWSsystem32MSCTF.dll
LoadedModule[31]=C:WINDOWSSYSTEM32kernel.appcore.dll
LoadedModule[32]=C:WINDOWSSYSTEM32CRYPTBASE.dll
LoadedModule[33]=C:WINDOWSSYSTEM32bcryptPrimitives.dll
LoadedModule[34]=C:WINDOWSsystem32ole32.dll
LoadedModule[35]=C:WINDOWSSYSTEM32clbcatq.dll
LoadedModule[36]=C:WINDOWSSYSTEM32WINSTA.dll
LoadedModule[37]=C:WINDOWSSYSTEM32Bcp47Langs.dll
LoadedModule[38]=C:WINDOWSSystem32IDStore.dll
LoadedModule[39]=C:WINDOWSSystem32SAMLIB.dll
LoadedModule[40]=C:WINDOWSSYSTEM32SETTINGSYNCPOLICY.dll
LoadedModule[41]=C:WINDOWSSYSTEM32DUI70.dll
LoadedModule[42]=C:WINDOWSWinSxSamd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.9600.16384_none_62475f7becb72503Comctl32.dll
LoadedModule[43]=C:WINDOWSSYSTEM32DUser.dll
LoadedModule[44]=C:WINDOWSSYSTEM32SndVolSSO.DLL
LoadedModule[45]=C:WINDOWSSYSTEM32HID.DLL
LoadedModule[46]=C:WINDOWSSystem32MMDevApi.dll
LoadedModule[47]=C:WINDOWSSystem32DEVOBJ.dll
LoadedModule[48]=C:WINDOWSSYSTEM32cfgmgr32.dll
LoadedModule[49]=C:WINDOWSSYSTEM32OLEACC.dll
LoadedModule[50]=C:WINDOWSSYSTEM32D3D10Warp.dll
LoadedModule[51]=C:Manish-InstallStartIsBackStartIsBack64.dll
LoadedModule[52]=C:WINDOWSSYSTEM32twinui.dll
LoadedModule[53]=C:WINDOWSSYSTEM32twinapi.appcore.dll
LoadedModule[54]=C:WINDOWSSYSTEM32XmlLite.dll
LoadedModule[55]=C:WINDOWSSYSTEM32Windows.UI.Immersive.dll
LoadedModule[56]=C:WINDOWSSYSTEM32ntmarta.dll
LoadedModule[57]=C:WINDOWSSYSTEM32twinui.appcore.dll
LoadedModule[58]=C:WINDOWSSYSTEM32WindowsCodecs.dll
LoadedModule[59]=C:WINDOWSSYSTEM32CRYPTSP.dll
LoadedModule[60]=C:WINDOWSsystem32rsaenh.dll
LoadedModule[61]=C:WINDOWSSYSTEM32bcrypt.dll
LoadedModule[62]=C:WindowsSystem32actxprxy.dll
LoadedModule[63]=C:WINDOWSsystem32explorerframe.dll
LoadedModule[64]=C:WindowsSystem32windows.immersiveshell.serviceprovider.dll
LoadedModule[65]=C:WINDOWSsystem32SearchFolder.dll
LoadedModule[66]=C:WINDOWSSYSTEM32WLDP.DLL
LoadedModule[67]=C:WindowsSystem32thumbcache.dll
LoadedModule[68]=C:WINDOWSSYSTEM32WTSAPI32.dll
LoadedModule[69]=C:WINDOWSSYSTEM32MsftEdit.dll
LoadedModule[70]=C:WINDOWSSYSTEM32MSIMG32.dll
LoadedModule[71]=C:WindowsSystem32Windows.Globalization.dll
LoadedModule[72]=C:WINDOWSSYSTEM32globinputhost.dll
LoadedModule[73]=C:Program FilesCommon Filesmicrosoft sharedinktiptsf.dll
LoadedModule[74]=C:WINDOWSsystem32authui.dll
LoadedModule[75]=C:WINDOWSSYSTEM32wuaext.dll
LoadedModule[76]=C:WINDOWSSYSTEM32samcli.dll
LoadedModule[77]=C:WINDOWSSYSTEM32netutils.dll
LoadedModule[78]=C:WINDOWSSYSTEM32LINKINFO.dll
LoadedModule[79]=C:WINDOWSSYSTEM32msiltcfg.dll
LoadedModule[80]=C:WINDOWSSYSTEM32VERSION.dll
LoadedModule[81]=C:WINDOWSSYSTEM32msi.dll
LoadedModule[82]=C:WINDOWSSYSTEM32PhotoMetadataHandler.dll
LoadedModule[83]=C:WINDOWSSystem32wpncore.dll
LoadedModule[84]=C:WINDOWSsystem32dwrite.dll
LoadedModule[85]=C:WINDOWSSystem32UIAnimation.dll
LoadedModule[86]=C:WINDOWSSYSTEM32nvwgf2umx.dll
LoadedModule[87]=C:WINDOWSsystem32PSAPI.DLL
LoadedModule[88]=C:WINDOWSSystem32wlidprov.dll
LoadedModule[89]=C:WINDOWSSYSTEM32globcollationhost.dll
LoadedModule[90]=C:WINDOWSSYSTEM32NInput.dll
LoadedModule[91]=C:WindowsSystem32Windows.Networking.Connectivity.dll
LoadedModule[92]=C:WindowsSystem32InputSwitch.dll
LoadedModule[93]=C:WINDOWSsystem32stobject.dll
LoadedModule[94]=C:WINDOWSsystem32BatMeter.dll
LoadedModule[95]=C:WINDOWSSYSTEM32sxs.dll
LoadedModule[96]=C:WINDOWSsystem32es.dll
LoadedModule[97]=C:WINDOWSsystem32prnfldr.dll
LoadedModule[98]=C:WINDOWSsystem32WINSPOOL.DRV
LoadedModule[99]=C:WINDOWSsystem32wevtapi.dll
LoadedModule[100]=C:WINDOWSSYSTEM32AUDIOSES.DLL
LoadedModule[101]=C:WINDOWSsystem32dxp.dll
LoadedModule[102]=C:WINDOWSWinSxSamd64_microsoft.windows.gdiplus_6595b64144ccf1df_1.1.9600.16384_none_9332526147499ed1gdiplus.dll
LoadedModule[103]=C:WINDOWSsystem32SETUPAPI.dll
LoadedModule[104]=C:WINDOWSsystem32SHDOCVW.dll
LoadedModule[105]=C:WINDOWSsystem32Syncreg.dll
LoadedModule[106]=C:WINDOWSSystem32WININET.dll
LoadedModule[107]=C:WINDOWSSystem32iertutil.dll
LoadedModule[108]=C:WINDOWSSYSTEM32Secur32.dll
LoadedModule[109]=C:WINDOWSSystem32npmproxy.dll
LoadedModule[110]=C:WindowsSystem32IPHLPAPI.DLL
LoadedModule[111]=C:WINDOWSsystem32NSI.dll
LoadedModule[112]=C:WindowsSystem32WINNSI.DLL
LoadedModule[113]=C:WINDOWSSYSTEM32wlanapi.dll
LoadedModule[114]=C:WindowsSystem32wwapi.dll
LoadedModule[115]=C:WindowsSystem32WinTypes.dll
LoadedModule[116]=C:WINDOWSSystem32netprofm.dll
LoadedModule[117]=C:WINDOWSsystem32WS2_32.dll
LoadedModule[118]=C:WINDOWSSYSTEM32ondemandconnroutehelper.dll
LoadedModule[119]=C:WINDOWSSYSTEM32winhttp.dll
LoadedModule[120]=C:WINDOWSSystem32wpnprv.dll
LoadedModule[121]=C:WINDOWSsystem32mswsock.dll
LoadedModule[122]=C:WINDOWSSYSTEM32urlmon.dll
LoadedModule[123]=C:WINDOWSSYSTEM32wkscli.dll
LoadedModule[124]=C:WINDOWSSYSTEM32DNSAPI.dll
LoadedModule[125]=C:WindowsSystem32Windows.Security.Authentication.OnlineId.dll
LoadedModule[126]=C:Program FilesBonjourmdnsNSP.dll
LoadedModule[127]=C:WindowsSystem32rasadhlp.dll
LoadedModule[128]=C:WINDOWSSystem32fwpuclnt.dll
LoadedModule[129]=C:WINDOWSsystem32CRYPT32.dll
LoadedModule[130]=C:WINDOWSsystem32MSASN1.dll
LoadedModule[131]=C:WINDOWSsystem32DPAPI.dll
LoadedModule[132]=C:WINDOWSSystem32AltTab.dll
LoadedModule[133]=C:WINDOWSsystem32wpdshserviceobj.dll
LoadedModule[134]=C:WindowsSystem32PortableDeviceTypes.dll
LoadedModule[135]=C:WindowsSystem32PortableDeviceApi.dll
LoadedModule[136]=C:WINDOWSsystem32WINTRUST.dll
LoadedModule[137]=C:Program FilesWindows Portable DevicesSqmApi.dll
LoadedModule[138]=C:WindowsSystem32taskschd.dll
LoadedModule[139]=C:WINDOWSSystem32pnidui.dll
LoadedModule[140]=C:WINDOWSsystem32NetworkStatus.dll
LoadedModule[141]=C:WindowsSystem32dhcpcsvc6.DLL
LoadedModule[142]=C:WindowsSystem32dhcpcsvc.DLL
LoadedModule[143]=C:WINDOWSsystem32SettingMonitor.dll
LoadedModule[144]=C:WINDOWSSystem32srchadmin.dll
LoadedModule[145]=C:WINDOWSSystem32CSCAPI.dll
LoadedModule[146]=C:WINDOWSsystem32mssprxy.dll
LoadedModule[147]=C:WINDOWSSystem32shacct.dll
LoadedModule[148]=C:WindowsSystem32bthprops.cpl
LoadedModule[149]=C:WindowsSystem32BluetoothApis.dll
LoadedModule[150]=C:WINDOWSSystem32SyncCenter.dll
LoadedModule[151]=C:WindowsSystem32Windows.Networking.Sockets.PushEnabledApplication.dll
LoadedModule[152]=C:WINDOWSsystem32schannel.DLL
LoadedModule[153]=C:WINDOWSSystem32Actioncenter.dll
LoadedModule[154]=C:WindowsSystem32imapi2.dll
LoadedModule[155]=C:WINDOWSSYSTEM32ncrypt.dll
LoadedModule[156]=C:WINDOWSSYSTEM32NTASN1.dll
LoadedModule[157]=C:WINDOWSsystem32ncryptsslp.dll
LoadedModule[158]=C:WINDOWSsystem32wwanapi.dll
LoadedModule[159]=C:WINDOWSSystem32hgcpl.dll
LoadedModule[160]=C:WINDOWSSystem32provsvc.dll
LoadedModule[161]=C:WINDOWSSYSTEM32ntshrui.dll
LoadedModule[162]=C:WINDOWSSYSTEM32srvcli.dll
LoadedModule[163]=C:WINDOWSsystem32NetworkExplorer.dll
LoadedModule[164]=C:Program Files (x86)AcronisTrueImageHometishell64.dll
LoadedModule[165]=C:WINDOWSsystem32comdlg32.dll
LoadedModule[166]=C:WINDOWSSYSTEM32MPR.dll
LoadedModule[167]=C:WINDOWSWinSxSamd64_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.8428_none_88dcdb0b2fb19957MSVCP80.dll
LoadedModule[168]=C:WINDOWSWinSxSamd64_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.8428_none_88dcdb0b2fb19957MSVCR80.dll
LoadedModule[169]=C:WINDOWSSYSTEM32dbghelp.dll
State[0].Key=Transport.DoneStage1
State[0].Value=1
FriendlyEventName=Stopped responding and was closed
ConsentKey=AppHangXProcB1
AppName=Windows Explorer
AppPath=C:Windowsexplorer.exe
ReportDescription=A problem caused this program to stop interacting with Windows.
NsPartner=windows
NsGroup=windows8
ApplicationIdentity=AC1F6E89B3E570A234A97B63B225A91D

Basically Windows Explorer is hanging. When I click on the start button in Desktop mode, Windows Explorer crashes and then restarts fine.

Hi All,

I am using VS2005 VB.NET on a Vista duel core processor machine.

Completely updated from Microsoft.

I have create a communication program that talks to a sensor we build.

The software seems to work fine most of the time. But it keeps crashing randomly.

Here is one I get.

A problem caused this program to stop interacting with Windows.

Problem Event Name: AppHangB1

Application Name: LPU2428_VS.vshost.exe

Application Version: 8.0.50727.42

Application Timestamp: 4333d898

Hang Signature: 7295

Hang Type: 256

OS Version: 6.0.6000.2.0.0.256.6

Locale ID: 1033

Additional Hang Signature 1: 2486b4d202f4c85552173a124568050d

Additional Hang Signature 2: bd92

Additional Hang Signature 3: 55e24eb9e083c27aa5426799100c56e7

Additional Hang Signature 4: 7295

Additional Hang Signature 5: 2486b4d202f4c85552173a124568050d

Additional Hang Signature 6: bd92

Additional Hang Signature 7: 55e24eb9e083c27aa5426799100c56e7

I have search and found people having problem with this but no solution for it.

Stopped working

Problem Event Name: APPCRASH

Application Name: LPU2428_VS.exe

Application Version: 1.0.0.0

Application Timestamp: 46f40188

Fault Module Name: mscorwks.dll

Fault Module Version: 2.0.50727.312

Fault Module Timestamp: 45372457

Exception Code: c0000005

Exception Offset: 0011c2f4

OS Version: 6.0.6000.2.0.0.256.6

Locale ID: 1033

http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409

Can anyone help?