Драйвер для сканера отпечатков пальцев hp windows 10

Thanks for posting this..

The driver is working for me on an EliteBook 8570p, though i did have to foce it a bit…

I upgraded from a  Windows 7 install (not factory image) to Windows 10 and decided to try out the new build-in OS sensor support. On Win7 I didn’t use it because it needed the HP tools installed and that was more bloat then i am comfortable with.. of course the problem is getting the drivers.. Windows seems to have installed a driver which  is over 2 years old and doesn’t even seem compatible with the OS fingerprint API. I’m not entirely sure whether Win10 is using the same one as Win7, but in any case, driver update didn’t find a newer one which was compatible with the OS fingerprint features.

I downloaded and installed the version Lucadebe posted ( Removed link for error in link ). (Note that the installer does seem to dissapear all of a sudden, this is normal i think, it just adds the driver to windows, it won’t actually update the device.)

I restarted, but unlike for the other people that wasn’t enough in my case. The reason for this was that the posted driver does not actually list the VFS491 as a compatible sensor.. 

So basically i had 2 options:

   1. use the driver (from lenovo) posted by the thread creator which is certified as Win10 compatible, but doesn’t officially support my sensor.

   2. use an older (but still relatively recent; a few months old) driver (from lenovo) which does support my sensor, but isn’t certified as Win10 compatible. There are several versions to chose from here, although NONE from HP.. 

The first driver does list the newer VFS495 sensor (mine is VFS491), so i figured i’d force it and see if it works, rather than use a slightly older driver (also from Lenovo) not listed as Win10 compatible.

I went into device manager and opened the properties for the biometric sensor. On the driver tab i selected ‘Update driver’ -> ‘Browse local dirvers’ -> ‘Let me pick from a list of device drivers on my computer’.

Next, because the new driver doesn’t actually list my sensor as compatible, i had to uncheck ‘Show compatible hardware’.

If you are using the HP provided driver it will by default have a driver selected from manufacturere ‘Validity Sensors, Inc.’. They were acquired by Synaptics, so the new driver will be available under ‘Synaptics FP Sensors’. I actually installed a number of newer drivers, but the one posted above should be listed as ‘Synaptics FP Sensors (WBF) (PID=003d)’. Select it and click next to install.. 

After installing the newer driver, opening the Sign In options screen suddenly showed an additional header «Windows Hello» with a button to add a fingerprint…

So far, working like a charm.

@PeerOne: I would get the driver from the HP site with the right driver match… IF HP actually bothered providing driver updates. As it is, the only recent drivers for the VFS491 are available through lenovo.  I have the HP Softpaq manager installed.. while the application itself got an update for Win10, the only ‘driver’ still being updated through it is the BIOS. Everything else is ancient… 

I find that especially dissapointing because these are generic drivers provided by Synaptics.. the OEMs simply have to repackage them.. but even that’s too much of an effort it would seem.

Also, considering windows 7 can upgrade itself to windows 10 in place, there are going to be a lot of people who will need win10 compatible drivers..

It saddens my that we have to rely on another manufacturer to provide us with drivers for HP products… Lenovo is still providing drivers for laptops that are older than mine, even drivers for newer operating systems..

Will definitely have to consider this when we have to replace our current laptops..

Thanks for posting this..

The driver is working for me on an EliteBook 8570p, though i did have to foce it a bit…

I upgraded from a  Windows 7 install (not factory image) to Windows 10 and decided to try out the new build-in OS sensor support. On Win7 I didn’t use it because it needed the HP tools installed and that was more bloat then i am comfortable with.. of course the problem is getting the drivers.. Windows seems to have installed a driver which  is over 2 years old and doesn’t even seem compatible with the OS fingerprint API. I’m not entirely sure whether Win10 is using the same one as Win7, but in any case, driver update didn’t find a newer one which was compatible with the OS fingerprint features.

I downloaded and installed the version Lucadebe posted ( Removed link for error in link ). (Note that the installer does seem to dissapear all of a sudden, this is normal i think, it just adds the driver to windows, it won’t actually update the device.)

I restarted, but unlike for the other people that wasn’t enough in my case. The reason for this was that the posted driver does not actually list the VFS491 as a compatible sensor.. 

So basically i had 2 options:

   1. use the driver (from lenovo) posted by the thread creator which is certified as Win10 compatible, but doesn’t officially support my sensor.

   2. use an older (but still relatively recent; a few months old) driver (from lenovo) which does support my sensor, but isn’t certified as Win10 compatible. There are several versions to chose from here, although NONE from HP.. 

The first driver does list the newer VFS495 sensor (mine is VFS491), so i figured i’d force it and see if it works, rather than use a slightly older driver (also from Lenovo) not listed as Win10 compatible.

I went into device manager and opened the properties for the biometric sensor. On the driver tab i selected ‘Update driver’ -> ‘Browse local dirvers’ -> ‘Let me pick from a list of device drivers on my computer’.

Next, because the new driver doesn’t actually list my sensor as compatible, i had to uncheck ‘Show compatible hardware’.

If you are using the HP provided driver it will by default have a driver selected from manufacturere ‘Validity Sensors, Inc.’. They were acquired by Synaptics, so the new driver will be available under ‘Synaptics FP Sensors’. I actually installed a number of newer drivers, but the one posted above should be listed as ‘Synaptics FP Sensors (WBF) (PID=003d)’. Select it and click next to install.. 

After installing the newer driver, opening the Sign In options screen suddenly showed an additional header «Windows Hello» with a button to add a fingerprint…

So far, working like a charm.

@PeerOne: I would get the driver from the HP site with the right driver match… IF HP actually bothered providing driver updates. As it is, the only recent drivers for the VFS491 are available through lenovo.  I have the HP Softpaq manager installed.. while the application itself got an update for Win10, the only ‘driver’ still being updated through it is the BIOS. Everything else is ancient… 

I find that especially dissapointing because these are generic drivers provided by Synaptics.. the OEMs simply have to repackage them.. but even that’s too much of an effort it would seem.

Also, considering windows 7 can upgrade itself to windows 10 in place, there are going to be a lot of people who will need win10 compatible drivers..

It saddens my that we have to rely on another manufacturer to provide us with drivers for HP products… Lenovo is still providing drivers for laptops that are older than mine, even drivers for newer operating systems..

Will definitely have to consider this when we have to replace our current laptops..

Что делать если не работает сканер отпечатка пальца на ноутбуке HP?

Сканер отпечатка пальцев, которым снабжаются некоторые модели ноутбуков HP, иногда перестаёт работать. Благо, возможность входа в систему при помощи пароля учётной записи сглаживает неудобство такой поломки.

С технологической точки зрения это достаточно простое устройство, поэтому аппаратные неисправности редко препятствуют его нормальной работе. С другой стороны, комплекс программных средств, необходимых для его нормальной работы сложен и состоит из нескольких компонентов. Именно их сбои и конфликты чаще всего становятся причиной поломки.

Также перед развёртыванием серьёзной деятельности следует очистить поверхность датчика при помощи небольшого количества аммиачного моющего средства или полоски скотча. Нарушение работы может быть связано с загрязнением сенсора.

Восстановление работы устройства

Столкнувшись с проблемами в работе сканера отпечатка пальцев, первым делом следует проверить, включён ли он в BIOS. Для этого нужно перезагрузить компьютер и, до начала загрузки ОС, несколько раз нажать F10. Затем:

После этих манипуляций компьютер перезагрузится и сканер, вероятно, будет работать нормально.

Переустановка драйверов и программного обеспечения

Проблема может быть и в программном обеспечении и/или драйверах датчика. Проверить драйвера поможет диспетчер устройств. Чтобы открыть его, нужно нажать Win+R и ввести команду devmgmt.msc в открывшемся окне.

Откроется упомянутый диспетчер устройств со списком, в котором должен быть пункт «Биометрические устройства». Под ним должен быть указан установленный в ноутбуке датчик (сенсор Validity или Authen Tech Inc). Если соответствующей записи нет или рядом с её пиктограммой расположен знак восклицания, то драйверов нет или они повреждены.

В любом случае придётся скачивать необходимый драйве со страницы загрузки программного обеспечения центра поддержки пользователей HP. На других источниках вместо необходимого драйвера может быть расположен вредоносный софт.

Для скачивания необходимого драйвера необходимо указать модельный номер своего ноутбука и версию используемой ОС. Подходящего драйвера может не оказаться на сайте из-за использования несоответствующей версии операционной системы. В таком случае придётся использовать ПО от сторонних разработчиков.

Вместе с драйвером (расположенном в разделе Драйвер – Клавиатура, мышь и устройства ввода) лучше скачать и дополнительную программу HP SimplePass Identity Protection из раздела Программное обеспечение – Решения.

Если программные настройки не исправили ситуацию, то неисправность может быть на стороне «железа». В таком случае лучше обратиться в сервисный центр.

Источник

Validity sensors hp как включить?

Как включить сканер отпечатков пальцев на ноутбуке HP Probook?

Чтобы настроить считыватель отпечатков пальцев, выполните следующие действия.

Как подключить сканер отпечатков пальцев HP?

Настройка HP SimplePass

Как включить сканер отпечатков пальцев на ноутбуке HP Windows 10?

Как включить сканер отпечатков пальцев?

Как включить сканер отпечатков на смартфоне

Чтобы включить её, выбираем Настройки. Там находим Экран блокировки и отпечаток пальца. Затем открываем Управление отпечатками пальцев. Злоумышленник не сможет включить эту функцию без вашего ведома, даже если в его руки попадёт разблокированный смартфон.

Как проверить сканер отпечатков пальцев на ноутбуке?

Как включить биометрическое устройство на ноутбуке HP?

Включение поддержки биометрических устройств

Почему не работает Windows Hello?

Если Windows Hello не работает, скорее всего, ваше оборудование несовместимо. Это означает, что вашей системе не хватает сканирования радужной оболочки глаза, сканирования отпечатков пальцев или инфракрасной 3D-камеры. К сожалению, сканер радужной оболочки глаза на данный момент еще не поступил в открытую продажу.

Как сделать свой отпечаток пальца?

Как сделать отпечаток пальца

Где в настройках отпечаток пальца?

Добавление отпечатка пальца

Как сменить отпечаток пальца?

Вы можете переименовывать отпечатки и удалять их.

Источник

Validity Fingerprint Sensor in windows 10 not working

I’ve no idea what changes related to fingerprint device, the windows auto update has installed to my computer.

I don’t see validity sensor driver in hp support website for windows 10 operating system.

Kindly help me in getting it working.

Welcome to the HP Forums 🙂

I would like to take a moment and thank you for using this forum, it is a great place to find answers.

As I understand the validity Fingerprint Sensor in windows 10 not working,

Don’t worry as I’ll be glad to help, however, to provide an accurate resolution, I need a few more details:

Did you check with any alternate applications, apart from the HP Simple pass?

While you respond to that, here’s what I recommend you do:

Install the HP Simple Pass Identity Protection Software for Windows 10: ftp://ftp.hp.com/pub/softpaq/sp71501-72000/sp71729.exe
If the issue persists, Please Click here to download the most viable driver for Windows 10 fingerprint reader (if need be) & if your

Simple Pass Software isn’t working:

Click here to download a different version of the same software.

If the information I’ve provided was helpful,

give us some reinforcement by clicking the solution and kudos buttons,

that’ll help us and others see that we’ve got the answers!

Riddle_Decipher
I am an HP Employee

Thanks for your time.

I haven’t really tried any alternative. Simple pass was preinstalled in windows 8.1 and i continue to use it even after windows 10 upgrade.

Appreciate your help.

I see that you were interacting with @Riddle_Decipher. He is out of office and I’m here to help!

Follow the steps below to install or update the fingerprint sensor drivers or security applications.

Enter your product name or number in the Enter product name or number box, and then click Go.

You might need select a model number from a list before you can access the support page for your product. If so, select your model number from the list.

Select your language and operating system from the drop-down menus under Select driver language and OS.

Choose to download the Validity Fingerprint Sensor driver or HP SimplePass application, as needed:

Click Download, and then click Save to save the file to a convenient location on your hard drive, such as the desktop on the computer.

Double-click the downloaded file and then follow the instructions to install the driver or software.

Restart the PC and try to set up the simple pass again.

If the issue persists, check the steps listed here: http://bit.ly/2nEBlpJ

That should help. Let me know!

Please click » Accepted as Solution » on the post that solves your issue to help others find the solution. To show appreciation for my help, please click the » Thumbs Up Icon » below!

Please click «Accepted as Solution» on the post that solves your issue to help others find the solution. To show appreciation for my help, please click the «Thumbs Up Icon» below!

Источник

Validity Fingerprint Sensor and windows 10: Not working

I am coming to you today as I already tried many (maybe all) of the suggested solutions posted on this forum.

Unfortunately, I never managed to get a proper, working install.

When trying to uninstall VFS driver using device manager, the biometric will dissapear from the device list. After restarting, the biometric will show the Validity sensor as if nothing happened, same driver version (2.3.0.0) and same driver details. Tried updating, manually uninstalling, third party drivers (Lenovo) etc. without success.

I never got to the point where Windows Hello would show up and let me configure the sensor.

Hope someone has a solution, at least to uninstall the driver as it seems to be the main problem.

Many thanks in advance for your time and advice.

i see did not work

Check your windows 10 Features for the Framework installation

Update the Frameworks

Install the HP ProtectTools Security Manager

Please uninstall the Lenovo driver

Install and Test the Version 4.5.133.0

or Test the driver

thanks go2 for your quick reply,

I tried both drivers, each time uninstalling previuous components from device manager and programs and features/remove program.

After updating (in both cases i.e. sp66915 and sp71833), the driver file details remained unchanged, as well as the version of the driver (2.3.0.0).

The synaptic WBF Fingerprint reader is installed (with version 4.5.307.0) and device manager says the device (VFS451) is working properly.

I then tried to update from device manager/update driver without success as the system recognize the installed driver as up to date, even when manually selecting the file.

the most interesting part is when I try to uninstall the driver from device manager, the biometric device disapear. I restart the computer and a few minutes later, everything return to normal as if the device had been installed again. Biometric appear back in the device manager list and the VFS is visible and working «properly» with a driver version 2.3.0.0. Magic.

Don’t know if this helps.

Источник

Windows 10 validity sensor driver install issue

HP Support programs recommend I install the latest Validity Sensor driver. I have downloaded and «successfully installed» this driver at least five times. The install program recognizes the files already exist, so I request they all are deleted and the process continues. I went to the control panel and found the biometrics validity sensor driver. I don’t recognize the file name I keep installing. Also, there is a note this driver requires «further installation» although it is «functioning properly». In fact the fingerprint sensor is working. I had a similar problem with an update to the latest Intel MEI driver. HP Support program indicates I recently «installed» the previous version, dated June 2015. What is the problem?

In general, I can offer the following:

Instructions, Help, Commentary:

Read the first page: Dragon Document Guidelines

The Validity Driver in the Device Manager that hooks into your third party security software (HP SimplePass) is not the same as the Windows Native fingerprint logon driver and BIOMETRICS setup found in Programs and Features. In most every case, the BIOMETRICS / Windows Native logon software in Programs and Features should be left alone, even while you can remove / delete / install / change / and do pretty much what you need to the Valdity Driver in the Device Manager and the HP SimplePass program.

Fa st Startup can be switched off (temporarily) if it appears that the feature is interfering with the installation of Drivers and / or programs.

Fast Startup / Fast Boot Option

NOTE : Remember that you cannot «upgrade» between Series 6 and Series 8 HP SimplePass; you can «Switch» between the series. See Section titled: Switch HP SimplePass Series (6 to 8 or 8 to 6)

Remember: Driver First > Reboot > Software Second > Reboot

When you see a Post that helps you,

Inspires you, provides fresh insight,

Or teaches you something new,

Click the » Thumbs Up » on that Post.

Click my Answer Accept as Solution to help others find Answers.

Источник

Описание

HP Validity Sensor — это драйвер для устройства сканирования отпечатков пальцев, которыми оснащаются некоторые линейки ноутбуков Hewlett-Packard. На сегодняшний день технология идентификации пользователя по отпечаткам пальцев одна из самых надежных и удобных способов защиты информации.

Основная идея и принцип работы заключаются в следующем: вначале пользователь создает эталонное изображение своих отпечатков пальцев, а затем, когда нужно войти в систему под своей учетной записью или получить доступ к защищенной информации он проводит пальцем по специальному считывающему устройству, которое создает рисунок папиллярного узора и сравнивает его с изображением в базе. Если они совпадают, программа дает пользователю доступ, в противном случае в доступе будет отказано.

Папиллярный рисунок уникален для каждого человека, и с течением жизни он не сам по себе не меняется, но всегда есть шанс получить механические повреждения, порезаться или обжечься, в этом случае программа может не опознать пользователя.  Для того чтобы этого избежать рекомендуется зарегистрировать два-три пальца, на случай, если папиллярный узор одного из них окажется поврежденным.

Для установки скачайте драйвер HP Validity Sensor в разделе файлы, после запуска следуйте инструкциям инсталлятора.