Драйвер для usb blaster altera скачать для windows xp

Скачать Altera USB-Blaster Device драйвер версии 2.12.00 для вашего компьютера или ноутбука бесплатно и без регистрации по прямой ссылке. Обновляемая база драйверов на driverslab.ru.

Поиск по ID

Altera USB-Blaster Device Driver v.2.12.00 Windows XP / Vista / 7 32-64 bits

Altera USB-Blaster Device Driver

Подробнее о пакете драйверов:

Тип: драйвер

Имя: Altera USB-Blaster Device Driver
Производитель: Generalplus Technology Inc.
Версия драйвера (программы установщика):
2.12.00, 2.04.16
Операционная система:
Windows XP Windows Vista Windows 7
Разрядность ОС:
32-bit (x86) 64-bit (x64)
Размер файла: 0.73 mb
Дата выхода: 2014-08-26

USB драйвер для программаторов Blaster от компании Altera. Предназначен для ручной установки на Windows XP, Windows Vista и Windows 7 32-64 бита.

Версия драйвера:

  • usbblstr.inf — v.2.12.00 от 26.08.2014

Поддерживаемые устройства:

  • Altera USB-Blaster
  • Altera Cubic Cyclonium
  • Altera Nios II Evaluation Board
  • Altera Cyclone III EP3C25 Starter Kit
  • Altera Cyclone III EP3C120 Development Kit
  • Altera Stratix III EP3SL150 Development Kit
  • Altera Stratix III EP3SL340 Development Kit
  • Altera Nios Embedded Evaluation Kit
  • Altera Nios Development Kit, Cyclone III Edition

Внимание! Перед установкой драйвера Altera USB-Blaster Device Driver рекомендутся удалить её старую версию. Удаление драйвера особенно необходимо — при замене оборудования или перед установкой новых версий драйверов для видеокарт. Узнать об этом подробнее можно в разделе FAQ.

Скриншот файлов архива

Файлы для скачивания (информация)

Поддерживаемые устройства (ID оборудований):

USBVID_09FB&PID_6001 Altera Blaster
USBVID_09FB&PID_6002 Altera Cubic
Cyclonium
USBVID_09FB&PID_6003 Altera Nios II
Evaluation
Board
USBVID_09FB&PID_6004 Altera Cyclone
III EP3C25
Starter
Kit
USBVID_09FB&PID_6005 Altera Cyclone
III
EP3C120
Developmen
t Kit
USBVID_09FB&PID_6006 Altera Stratix
III
EP3SL150
Developmen
t Kit
USBVID_09FB&PID_6007 Altera Stratix
III
EP3SL340
Developmen
t Kit
USBVID_09FB&PID_6008 Altera Nios
Embedded
Evaluation
Kit
USBVID_09FB&PID_6009 Altera Nios
Developmen
t Kit,
Cyclone
III
Edition

Другие драйверы от USB

Сайт не содержит материалов, защищенных авторскими правами. Все файлы взяты из открытых источников.

© 2012-2023 DriversLab | Каталог драйверов, новые драйвера для ПК, скачать бесплатно для Windows
kamtizis@mail.ru
Страница сгенерирована за 0.150055 секунд


Источник

From Terasic Wiki

Jump to: navigation, search

To install the driver for your USB Blaster cable, follow the instruction for your particular operating system.

Contents

  • 1 For Windows 10, do the following:
  • 2 For Windows 7 and Windows 8, do the following:
  • 3 For Windows Vista, do the following:
  • 4 For Windows XP, do the following:
  • 5 Driver
  • 6 Reference

For Windows 10, do the following:

  1. Plug the USB-Blaster into your PC.
  2. Open the Device and Printers (Control Panel | Devices and Printers).
  3. Under Unspecified, USB Blaster should be listed. Right mouse click on this and then select Properties.
  4. Select the Hardware tab and select Properties.
  5. A new window should pop up with the General tab already selected. Select Change Settings.
  6. Again a new window should pop up with the General tab already selected. Select Update.
  7. Select Browse my computer for driver software.
  8. Find <Path to Quartus II installation>quartusdrivers
  • (Note 1: Your altera file is located at the location you selected when you first installed quartus. The location listed in this document is the default location)
  • (Note 2: Stop at the drivers folder, i.e., do NOT go deeper by opening a folder within the drivers folder)
  1. Select OK. Make sure the proper path was selected then select Next.
  2. If the Windows security window pops up Check the Always trust software from “Altera Corporation”box and select Install.

For Windows 7 and Windows 8, do the following:

  1. Plug the USB-Blaster download cable into the PC. The following will appear on the screen: Device driver software was not successfully install. Select Click here for details.
  2. Select Change settings…
  3. Now cancel this (probably by selecting Cancel)
  4. Open the Device Manager (Windows Key | Control Panel | Device Manage)
  5. Under Other devices, USB Blaster should be listed. Right mouse click on this and then select Update Driver Software…
  6. Select Browse my computer for driver software
  7. Find <Path to Quartus II installation>quartusdrivers, then select Next; (Note: Stop at this folder, i.e., do NOT go deeper by opening a folder within the drivers folder)
  8. Check the Always trust … box and then select Install

For Windows Vista, do the following:

  1. Plug the USB-Blaster download cable into the PC. The Found New Hardware dialog box appears.
  2. Select Locate and install driver software (recommended).
  3. Select Don’t search online.
  4. When you are prompted to Insert the disc that came with your USB-Blaster, select I don’t have the disc. Show me other options.
  5. Select Browse my computer for driver software (advanced) when you see the Windows couldn’t find driver software for your device.
  6. Click Browse… and browse to the <Path to Quartus II installation>driversusb-blaster directory. Click OK.
  7. Select the Include subfolders option and click Next.
  8. If you are prompted Windows can’t verify the publisher of this driver software, select Install this driver software anyway in the Window Security dialog box.
  9. The installation begins.
  10. When The software for this device has been successfully installed appears, click Close.

For Windows XP, do the following:

  1. Plug the USB-Blaster download cable into the PC. The Found New Hardware dialog box appears.
  2. Select Locate and install driver software (recommended).
  3. Select Don’t search online.
  4. When you are prompted to Insert the disc that came with your USB-Blaster, select I don’t have the disc. Show me other options.
  5. Select Browse my computer for driver software (advanced) when you see the Windows couldn’t find driver software for your device.
  6. Click Browse… and browse to the <Path to Quartus II installation>driversusb-blaster directory. Click OK.
  7. Select the Include subfolders option and click Next.
  8. If you are prompted Windows can’t verify the publisher of this driver software, select Install this driver software anyway in the Window Security dialog box.
  9. The installation begins.

When The software for this device has been successfully installed appears, click Close. If you are running Windows in 64-bit mode, you MUST boot your computer as following both when installing the USB-Blaster driver AND when using Quartus to program your PLD.

    • During boot up of the computer, continuously press F8 (but do NOT hold it down).
    • Scroll down to “Disable Driver Signature Enforcement,” then hit Enter.

You must set up the driver before programming your PLD (CPLD or FPGA)

Driver

USB Blaster Drvier From Q16.1

Reference

  • Reference by Dr. Eric M. Schwartz
  • Back
Источник

The browser version you are using is not recommended for this site.
Please consider upgrading to the latest version of your browser by clicking one of the following links.

  • Safari
  • Chrome
  • Edge
  • Firefox

You must install the Intel® FPGA USB-Blaster or Intel FPGA USB-Blaster II download cable driver before you can use the cable to program devices with Quartus® II software.

The first time you plug in the USB-Blaster or USB-Blaster II download cable, the Windows XP Found New Hardware Wizard prompts you to install the driver. (Note: Do not use the Add Hardware Wizard from the Control Panel.)

The Intel FPGA on-board USB-Blaster II cable appears as Intel FPGA USB-Blaster (unconfigured) when first attached to your system. After it has been configured by the Quartus II software, it will appear as Intel FPGA USB-Blaster II (JTAG interface), and then Intel FPGA USB-Blaster II (SystemConsole interface). You may need to install drivers for each of these interfaces in the same was as described below.

You must have system administration (Administrator) privileges to install the USB-Blaster or USB-Blaster II download cable driver.

Driver Installation for All Versions of Quartus II Software Except Versions 6.1 to 7.2

  1. Plug the USB-Blaster or USB-Blaster II download cable into the PC. The Found New Hardware Wizard appears.
  2. If you are prompted to answer a question about Windows XP Update, choose No, not this time and click Next.
  3. Select Install from a list or specific location (Advanced) and click Next.
  4. Select Don’t search. I will choose the driver to install and click Next.
  5. If you are prompted to Select a hardware type, keep the default selection Show All Devices, and click Next.
  6. Select Intel FPGA USB-Blaster from the wizard list of hardware devices, then click Have Disk… If the device is not available in the list, click Have Disk… without selecting any device from the wizard list.
  7. Click Browse… and browse to the <Path to Quartus II installation>drivers<cable type> directory. For USB-Blaster cables the driver is in the usb-blaster directory and for USB-Blaster II cables the driver is in the usb-blaster-ii directory.
  8. Select the *.inf file in the driver directory: usbblst.inf for USB-Blaster and usb-blaster2.inf for USB-Blaster II.
  9. Click Open.
  10. If the hardware Intel FPGA USB-Blaster appears in the Model list, select the device.
  11. Click Next in the wizard.
  12. Click Continue Anyway in the warning dialog box.
  13. Click Finish.
  14. To complete your installation, set up programming hardware in the Quartus II software.

Driver Installation for Quartus II Software Versions 6.1 to 7.2

  1. Plug the USB-Blaster or USB-Blaster II download cable into the PC. The Found New Hardware Wizard appears.
  2. If you are prompted to answer a question about Windows XP Update, choose No, not this time and click Next.
  3. Select Install from a list or specific location (Advanced) and click Next.
  4. Select Don’t search. I will choose the driver to install and click Next.
  5. If you are prompted to Select a hardware type, keep the default selection Show All Devices, and click Next.
  6. Select Intel FPGA USB-Blaster from the wizard list of hardware devices, then click Have Disk… If the device is not available in the list, click Have Disk… without selecting any device from the wizard list.
  7. Click Browse… and browse to the <Path to Quartus II installation>drivers<cable type> directory. For USB-Blaster cables the driver is in the usb-blaster directory and for USB-Blaster II cables the driver is in the usb-blaster-ii directory.
  8. Browse to the x32 directory (Windows 2000/XP standard 32-bit) or x64 directory (Windows XP 64-bit).
  9. Click Open. The wizard automatically chooses the required file.
  10. If the hardware Intel FPGA USB-Blaster appears in the Model list, select the device.
  11. Click Next in the wizard.
  12. Click Continue Anyway in the warning dialog box.
  13. Click Finish.
  14. To complete your installation, set up programming hardware in the Quartus II software.

Источник

Altera USB-Blaster Device Driver v.2.12.00 Windows XP / Vista / 7 32-64 bits

Info:

Model: Altera USB-Blaster Device Driver
Vendor: Generalplus Technology Inc.
Version: 2.12.00, v.2.04.16
Operating system: Windows XP, Windows Vista, Windows 7
Bits: 32-bit (x86), 64-bit (x64)
Driver Date: 2014-08-26
Size: 0.73 mb

Driver description

Download driver Altera USB-Blaster Device Driver version 2.12.00, v.2.04.16 for Windows XP, Windows Vista, Windows 7 32-bit (x86), 64-bit (x64).

Screenshot of files

File Name

Usb_blaster_q16.1.zip — (0.73 mb) v.2.12.00 — 26.08.2014

Altera_USB-Blaster.zip — (0.2 mb) v.2.04.16 — 17.02.2009

Link to file:

Please, enter the answer to the following question

Источник

Microsoft

Специальное предложение. См. дополнительную информацию о Outbyte и unistall инструкции. Пожалуйста, просмотрите Outbyte EULA и Политика Конфиденциальности

Microsoft Altera USB-Blaster


Windows XP, XP 64-bit, Vista, Vista 64-bit, 7, 7 64-bit, 11, 10, 8, 8.1

Microsoft Altera USB-Blaster Windows для устройств собирались с сайтов официальных производителей и доверенных источников. Это программное обеспечение позволит вам исправить ошибки Microsoft Altera USB-Blaster или Microsoft Altera USB-Blaster и заставить ваши устройства работать. Здесь вы можете скачать все последние версии Microsoft Altera USB-Blaster драйверов для Windows-устройств с Windows 11, 10, 8.1, 8 и 7 (32-бит/64-бит). Все драйверы можно скачать бесплатно. Мы проверяем все файлы и тестируем их с помощью антивирусного программного обеспечения, так что скачать их можно на 100% безопасно. Получите последние WHQL сертифицированные драйверы, которые хорошо работают.

Эта страница доступна на других языках:
English |
Deutsch |
Español |
Italiano |
Français |
Indonesia |
Nederlands |
Nynorsk |
Português |
Українська |
Türkçe |
Malay |
Dansk |
Polski |
Română |
Suomi |
Svenska |
Tiếng việt |
Čeština |
العربية |
ไทย |
日本語 |
简体中文 |
한국어

Источник


  1. Главная

  2. Драйверы

  3. Сетевые устройства

  4. Сетевые устройства Altera

  5. Altera USB-Blaster

  • Altera USB-Blaster

    Версия:

    17.3.22.909
    (29 мар 2017)

    Файл *.inf:
    usbblstr.inf




    Windows Vista, 7, 8, 8.1, 10

В каталоге нет драйверов для Altera USB-Blaster под Windows.
Скачайте DriverHub для автоматического подбора драйвера.

Драйверы для Altera USB-Blaster собраны с официальных сайтов компаний-производителей и других проверенных источников.
Официальные пакеты драйверов помогут исправить ошибки и неполадки в работе Altera USB-Blaster (сетевые устройства).
Скачать последние версии драйверов на Altera USB-Blaster для компьютеров и ноутбуков на Windows.


Версия: 1.3.7.1452 для Windows 7, 8, 10 и 11

Бесплатное ПО

В комплекте идет опциональное ПО

  • Yandex Browser
  • Opera Browser
  • Avast Free Antivirus
  • World of Tanks
  • World of Warships

Источник

Каталог Драйверов
⇒ USB устройства
⇒ Altera
⇒ Altera USB-Blaster

Установщик драйверов:

В случае, когда вы не хотите тратить время на поиск нужного драйвера для вашего ПК,
к вашим услугам представлен автоматический установщик, который самостоятельно подберет
нужные и самые актуальные драйвера для всех устройств вашей системы.
Скачать Outbyte Drivers Installer вы можете перейдя по этой ссылке

Установить драйвера автоматически

Special offer.
See more information about
Outbyte
and
uninstall instructions.
Please review Outbyte
EULA
and
Privacy policy.

Устройство: Altera USB-Blaster Drivers Installer
Версия драйвера: 2.0.0.18
Дата драйвера: 2023-02-05
Размер файла: 1.12 Mb
Поддерживаемые ОС: Windows 2000, Windows XP, Windows Vista, Windows 7, Windows 8

Установить драйвера автоматически

Special offer.
See more information about
Outbyte
and
uninstall instructions.
Please review Outbyte
EULA
and
Privacy policy.

Популярные ноутбуки

  • Lenovo ThinkPad T500 (2241WK1)

  • HP HP Pavilion dv1000 (EA377UA#ABA)

  • Sony SVT14115CXS

  • ASUS A6U

  • EMachines G33M05E3

  • Lenovo ThinkCentre M92p (3212B47)

  • LG F1-2A7DR1

  • HP FL267AA-AKB a6563.cs

  • LG LM50-DCKK

  • Itautec Infoway w7510

Популярные устройства

  • FOMA L01A

  • ATI RADEON 9600 Series Secondary

  • Intel(R) 631xESB/6321ESB/3100 Chipset USB2 erweiterter Hostcontroller — 268C

  • MATSHITA LS-120 VER4 07 ATA Device

  • Intel(R) E8500/E8501 PCI Express x4 Port A1 — 2607

  • HL-DT-ST RW/DVD GCC-4522B ATA Device

  • Intel(R) PRO/1000 GT Network Connection

  • PCTV 78e

  • USB32DVIPRO

  • Iridium USB Serial Port (COM10)

Источник

Понравилась статья? Поделить с друзьями:
  • Драйвер для unknown device для windows 7 скачать бесплатно на русском
  • Драйвер для umax astra 3450 для windows 7
  • Драйвер для uhd 630 на windows 7
  • Драйвер для tws наушников windows 7
  • Драйвер для tsc tdp 225 для windows 10