Home » Xiaomi » Xiaomi Redmi 9T USB Driver
If you are an owner of Xiaomi Redmi 9T and looking out for usb drivers to connect your device with the computer then you have landed on the right page. Download Xiaomi Redmi 9T USB driver from here, install it in your computer and connect your device with PC or Laptop successfully.
Here, we have provided two usb drivers for your Xiaomi Redmi 9T.
USB Driver Type: Qualcomm Driver
USB Driver Purpose: For flashing Stock firmware on your device.
File Size: 11 MB
Download Now
USB Driver Type: ADB Driver
USB Driver Purpose: For connecting your device to a computer.
File Size: 8.3 MB
Download Now
Steps To Install Xiaomi Redmi 9T Qualcomm Driver In Computer
Video Tutorial
If you don’t like this video tutorial or if you would like to get more instructions, then continue reading.
Step 1: To get started, download the driver and extract it on your desktop.
Step 2: Open the extracted file, choose the setup type and click “Next” in the setup wizard.
Step 3: Then, select “I accept the terms in the licence agreement” and click “Next”.
Step 4: Now to start installing your new hardware, click “Install” in the InstallShield Wizard.
Step 5: Once done, click “Finish” to complete the installation process.
That’s it. Your device driver is now successfully installed on your computer.
Steps To Install Xiaomi Redmi 9T ADB Driver In Computer
Video Tutorial
If you don’t like this video tutorial or if you would like to get more instructions, then continue reading.
Step 1: To get started, download the driver and extract it on your desktop.
Step 2: Now, open Device Manager > Action > Add legacy hardware.
Step 3: Next, click “Next” in the Add legacy hardware wizard.
Step 4: Now choose “Install the hardware that I manually select from the list (Advanced)” and click “Next“.
Step 5: Once done choose “Show all devices“, click “Next” and select the extracted file manually from your computer.
Step 6: Now to start installing your new hardware, click “Next” again.
Step 7: Click “Install” in the Windows security prompt window.
Step 8: Next, click “Finish” to complete installation.
That’s it. Now you have successfully finished installing ADB driver on your computer. If you encounter any issues while following this tutorial, do let me know via comments.
Rajarajacholan Kulothungan is a tech nerd and an Android enthusiast working for AllUSBDrivers.com from 2020. He has a knack for finding the right Windows USB driver for Android devices, and he shares his experiences here.
Reader Interactions
Xiaomi Redmi 9T USB Driver allows you to connect your Xiaomi Smartphone to the Windows Computer without installing the Xiaomi PC Suite Application. The Xiaomi Redmi 9T Driver can be helpful if you’re trying to transfer your files from the Mobile to the Computer or from the Computer to the Xiaomi Device.
You can also use it during the Firmware (OS) Flashing or Installing process on the device or fixing any Software-related issues.
Xiaomi Redmi 9T Driver for Windows
Xiaomi USB Driver allows you to connect your Xiaomi Smartphone and Tablets to the Windows Computer and transfer data between the Computer and the Xiaomi device. Apart from this, it also allows you to sync data between the device and the Computer, back up your existing data on the Computer or restore the data on the Xiaomi device.
There are several circumstances when you might need to install the Xiaomi driver to connect the computer. They are:
- Transfer data from the Xiaomi device to the Computer or from the computer to the device.
- To free up the device space.
- To install the Stock Firmware (OS) on the device.
- To Write/Flash IMEI on the Device.
Download Xiaomi Redmi 9T Driver
Xiaomi Redmi 9T Smartphone is powered by Qualcomm SM6115 Snapdragon 662 Chipset. Therefore, you have to install the Qualcomm USB Driver and the ADB Driver to connect the Smartphone to the Computer.
For Windows (32-64 Bit) |
||
Driver | Size | Download |
Qualcomm Driver | 19.50 MB | Driver |
ADB Driver | 8.27 MB | Driver |
Frequently Asked Questions
What is Xiaomi Redmi 9T USB Driver?
The Xiaomi Redmi 9T USB Driver is a free software primarily used to install the Xiaomi Drivers on the Windows Computer with a few clicks.
How do I install the Xiaomi Redmi 9T Qualcomm Driver?
You can install the Xiaomi Redmi 9T Qualcomm USB Driver by downloading the zip file and installing the driver on the Computer. The installation process is quite similar to the standard Windows Application. You can follow the How to install the Qualcomm Driver page to install the drivers correctly.
How do I install the Xiaomi Redmi 9T ADB Driver?
You can install the Xiaomi Redmi 9T ADB Driver by downloading and extracting the driver on the Computer. Then Open the Device Manager and Locate the ADB Drivers to Install it. Finally, you can follow the How to install the ADB Driver page to install the drivers correctly.
Is Xiaomi Redmi 9T USB Driver Free?
Yes. The Xiaomi Redmi 9T USB Driver is 100% free since the Xiaomi community officially releases it for Xiaomi Mobile users.
Is Xiaomi Redmi 9T USB Driver Safe?
Yes. The Xiaomi Redmi 9T USB Driver is 100% safe for the Computer, laptop, and Xiaomi device. Furthermore, since the Xiaomi community officially releases the driver, it’s 100% safe & secure to use on the Computer.
Where Can I find Xiaomi Redmi 9T Firmware?
If you are looking for the original Xiaomi Redmi 9T Firmware (Stock ROM), then head over to the Xiaomi Redmi 9T Firmware page.
Xiaomi USB Drivers allow you to connect your Phone to a PC, whether it’s a smartphone or a tablet so that the computer can easily recognize the device via the USB port. In this article, We will publish links for Xiaomi Redmi 9T USB Driver to transfer files from Your Phone to your computer or you will be able to update your Xiaomi to latest Android OS.
You must download and install the Xiaomi Redmi 9T USB Driver on your computer device if you want to connect the phone with your computer for data transfer, Root Xiaomi, Install official Rom and Custom Rom, backup, or restore and retrieve data.
Read More: Download & Install MIUI ROM for Xiaomi Redmi 9T – All MIUI firmwares
Download Xiaomi USB Driver For connecting your device to a computer:
Download Mi PC Suite:
- Driver Name: Mi PC Suite
- Driver Size: 37.3M
- Download Mi Pc Suite: Download
Download Qualcomm Driver For Flashing Firmware:
- Driver Name: Qualcomm Driver
- Driver Size: 10.9 MB
- Download Qualcomm Driver: Download
Download ADB Driver:
- Driver Name: Adb Driver
- Driver Size: 8.28 MB
- Download ADB Driver: Download
Xiaomi USB Driver was compatible with Windows 7, 8 and Windows 10.
How To Install Xiaomi ADB Driver In Computer
1- Download ADB Driver to your computer and unzip it.
2- Open Device Manager on your computer
3- Click on Action and Select to add the legacy hardware
4- To Continue, Select Next.
5- Choose to Install The Hardware That I manually select from a list (advanced) and Click Next.
6- Select Show all devices, and click on Next
7- Select Have Disk. Then select the Browse
8- Choose Android_winusb And Click Open.
9- Click OK
10- Tap the Android ADB interface and click on Next
12- click on Next
13- click on Finish
Well done, the Xiaomi USB Driver is installed on your computer.
How To Install Xiaomi Qualcomm Driver In Computer
1- Download the Xiaomi Qualcomm Driver and Open Qualcomm USB Driver Setup File
2- After That choose, WWAN DHCP is not used to get IPAddress And select Next
3- Click Next
4- Choose Modify, After That Click on next
5- Click On Next
6- Click on Install To Begin The Installation
6- Select Finish
7- Well done, the Xiaomi Qualcomm Driver is installed on your computer.
Xiaomi Redmi 9T USB Driver for Windows 10, Windows 8.1, Windows 8, Windows 7 Download – Xiaomi Redmi 9T USB Driver is software that creates a stable connection between the computer’s operating system and the Xiaomi Android Phones. The USB Driver for Xiaomi Redmi 9T is an essential component. Without that, the connection will not work correctly when you were developing your phone.
If you are trying to develop your Xiaomi Redmi 9T with a PC or laptop, the first thing you need is the Official USB Driver for Xiaomi Redmi 9T. Here, We offer the Xiaomi Redmi 9T USB Driver for Windows 7/8/10 with a proper installation guide. It is effortless to download the Xiaomi Redmi 9T USB driver, click the “Download Link” below.
With Xiaomi Redmi 9T USB driver installed on a Windows PC, you can do various advanced features on your device. Including firmware update, firmware downgrade, or flashing stock ROM a.k.a reinstall your Xiaomi Android Smartphone operating system. Meanwhile, if you want to connect the phone to use the Official Xiaomi Redmi 9T PC Suite, you only need the Official Xiaomi Redmi 9T ADB Driver.
Xiaomi Redmi 9T USB Driver OS Compatibility
Xiaomi Redmi 9T USB Driver is compatible with different versions of Windows. Such as Windows 10 (32-bit), Windows 10 (64-bit), Windows 8.1 (32-bit), Windows 8.1 (64-bit), Windows 8 (32-bit), Windows 8 (64-bit), Windows 7 (32-bit), Windows 7 (64-bit), Windows Vista (32-bit), Windows Vista (64-bit), and Windows XP (32-bit).
Xiaomi Redmi 9T USB Driver Installation Instructions for Windows 10, 8, 7
To install the Xiaomi Redmi 9T USB Driver for Windows for the first time, do the following:
- First, download the USB driver for Xiaomi Redmi 9T from the Download link section and save them in a folder where the file is easy to find.
- Locate the file, select it directly in your driver file.
- Extract the downloaded file.
- Wait until the extraction process is complete.
- Double click on the .exe file.
- Install the driver.
- Select Run if a security warning appears on the screen of your laptop / PC and clicks Yes.
- You will then be asked to select the language, select the English language, and select Next.
- Wait for the complete installation process.
- Xiaomi Redmi 9T USB driver for Windows 10, Windows 8.1, Windows 8, Windows 7 were installed correctly.
Once the correct USB driver for Xiaomi Redmi 9T is installed correctly, you can use Android tools and utilities, such as the Xiaomi PC Suite software (link above in the third paragraph) or Moborobo Android PC Suite, which allows you to manage all types of Android devices On your computer.
That’s all the tutorial on how to install the Xiaomi Redmi 9T USB driver for the Windows procedure. If there is a problem or an error, you can keep in touch with us through the Contact menu at the bottom of this page. Support us and share it with anyone who needs it so we can continue to support you.
However, before continuing, let me differentiate between a USB driver and an ADB driver. In simple terms, a USB driver is used to flash the stock firmware on your Xiaomi smartphone, while an ADB driver is used to connect your phone to a computer. A USB driver is required when trying to flash a custom ROM when trying to root or update a new firmware on your Smartphone. On the other hand, ADB Driver (Android Debug Bridge Driver) can control your device via USB using a computer. You can copy and return files, install and uninstall applications, execute shell commands, and solve multiple problems.
Xiaomi Redmi 9T USB Driver DownloadXiaomi Redmi 9T User Guide PDF Download
Xiaomi Redmi 9T USB Driver for Windows Download
Xiaomi Redmi 9T USB Driver Download for Windows 10, Windows 8.1, Windows 8, Windows 7 (32/64-bit)
Download
Xiaomi Redmi 9T User Guide PDF
Download
The drivers to connect/unlock the Xiaomi Redmi 9T smart phone to backup,tether, network and more are below. Be aware if you are looking to unlock the bootloader or other advanced software functions it most likely will void any existing warranty. Also Functions used at the fastboot screen can wipe the phones data, be sure to have a full backup before conducting any technical procedures. Look at the specs on this page, if your device uses Mediatek chipset use MTK Drivers, if your device has a Qualcomm chipset then use Qualcomm drivers.
Basic Specs:
Build: Glass front (Gorilla Glass 3), plastic frame, plastic back
SIM: Dual SIM (Nano-SIM, dual stand-by)
: Water-repellent coating
Display: Type: IPS LCD, 400 nits (typ)
Size: 6.53 inches, 104.7 cm2 (~83.4% screen-to-body ratio)
Resolution: 1080 x 2340 pixels, 19.5:9 ratio (~395 ppi density)
Protection: Corning Gorilla Glass 3
Platform: OS: Android 10, MIUI 12
Full Specs/Additional configurations
Show: Full Specs/Additional configurations
Body: Dimensions: 162.3 x 77.3 x 9.6 mm (6.39 x 3.04 x 0.38 in)
Weight: 198 g (6.98 oz)
Build: Glass front (Gorilla Glass 3), plastic frame, plastic back
SIM: Dual SIM (Nano-SIM, dual stand-by)
: Water-repellent coating
Display: Type: IPS LCD, 400 nits (typ)
Size: 6.53 inches, 104.7 cm2 (~83.4% screen-to-body ratio)
Resolution: 1080 x 2340 pixels, 19.5:9 ratio (~395 ppi density)
Protection: Corning Gorilla Glass 3
Platform: OS: Android 10, MIUI 12
Chipset: Qualcomm SM6115 Snapdragon 662 (11 nm)
CPU: Octa-core (4×2.0 GHz Kryo 260 Gold & 4×1.8 GHz Kryo 260 Silver)
GPU: Adreno 610
Memory: Card slot: microSDXC (dedicated slot)
Internal: 64GB 4GB RAM, 128GB 4GB RAM, 128GB 6GB RAM
: UFS 2.1 — 64GB
UFS 2.2 — 128GB
Main Camera: Quad: 48 MP, f/1.8, 26mm (wide), 1/2.0″, 0.8µm, PDAF
8 MP, f/2.2, 120˚ (ultrawide), 1/4.0″, 1.12µm
2 MP, f/2.4, (macro)
2 MP, f/2.4, (depth)
Features: LED flash, HDR, panorama
Video: [email protected]
Selfie camera: Single: 8 MP, f/2.1, 27mm (wide), 1/4.0″, 1.12µm
Video: [email protected]
Sound: Loudspeaker: Yes, with stereo speakers
3.5mm jack: Yes
: 24-bit/192kHz audio
Comms: WLAN: Wi-Fi 802.11 a/b/g/n/ac, dual-band, Wi-Fi Direct, hotspot
Bluetooth: 5.0, A2DP, LE
GPS: Yes, with A-GPS, GLONASS, GALILEO, BDS
NFC: Yes (market/region dependent)
Infrared port: Yes
Radio: FM radio
USB: USB Type-C 2.0, USB On-The-Go
Features: Sensors: Fingerprint (side-mounted), accelerometer, proximity, compass
Battery: Type: Li-Po 6000 mAh, non-removable
Charging: Fast charging 18W
Reverse charging 2.5W
Install Instructions
Step 1 — Download and extract the Android USB Driver to your PC.
Step 2 — Click Start (Windows) -> Control Panel -> Device Manager (Select Device Manager).
Step 3 — On the Device Manager window find and click on computer name to select Add legacy hardware.
Step 4 — Select Next
Step 5 — Selext Install the hardware that I manually select from a list (Advanced), and click the Next
Step 6 — Select Show All Devices afterward click Next button again.
Step 7 — Click the Have Disk button.
Step 8 — Click Browse button to find the extracted Android ADB Driver -> android_winusb.inf and click on Open.
Step 9 — Click OK.
Step 10 — Now select the Android ADB Interface -> click Next button.
Step 11 — Click Next button again.
Step 12 — Windows Security box will appear, to confirm whether you really want to install the Android USB Driver, so just choose the Install this driver software anyway.
Step 13 — Once you clicked the Finish button, then repeat from step 2 to choose Android Composite ADB Interface.
Step 14 — Done.
Windows computer not recognizing Xiaomi Redmi 9T Phone? Or Xiaomi Redmi 9T android phone won’t connect to the PC? It can be the result of missing Xiaomi Redmi 9T USB drivers or bad or corrupted drivers. To fix Xiaomi Redmi 9T Android phone not showing up on PC, download the Xiaomi Redmi 9T USB driver and install it on your computer.
Xiaomi USB drivers are essential to efficiently connect Xiaomi Redmi 9T to Computer and Laptop using a USB cable. On this page, we have managed to share the official Xiaomi Redmi 9T USB driver for Windows 11, Windows 10, Windows 7, Windows 8.1, and Windows 8. Apart from the official USB Driver for Xiaomi Redmi 9T, we have also shared Xiaomi Redmi 9T ADB interface drivers and Fastboot drivers.
The Xiaomi Redmi 9T Android USB driver allows you to connect your phone as an MTP USB device (Media Transfer Protocol) to the computer so that you can transfer images, videos, documents, and other files between the phone and computer. Thus it will fix the android file transfer not working issue.
The Xiaomi Redmi 9T ADB driver and Fastboot driver allow you to pass ADB and Fastboot commands from the PC to perform certain operations on your phone.
Table of Contents
- 1 Download Xiaomi Redmi 9T USB Driver
- 1.1 Xiaomi Redmi 9T Driver for Flashing Firmware
- 1.2 Xiaomi Redmi 9T USB Driver for normal connecting to PC
- 1.3 Xiaomi Redmi 9T ADB and Fastboot Drivers
- 2 How to Install Xiaomi Redmi 9T USB Drivers
- 3 How to Install Xiaomi Redmi 9T USB Drivers Manually
- 4 How to Install Xiaomi Redmi 9T ADB and Fastboot Drivers
The Xiaomi mobile drivers offered here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM Recovery, Unlocking Bootloader, etc. It can also be used for general purposes like transferring media and files to and from mobile to PC.
Xiaomi Redmi 9T Driver for Flashing Firmware
Download Now
How to install: Follow Tutorial
Xiaomi Redmi 9T USB Driver for normal connecting to PC
Download Now
How to install: Follow Tutorial
The Xiaomi Redmi 9T Fastboot and ADB drivers can be downloaded below.
Xiaomi Redmi 9T ADB and Fastboot Drivers
Download Now
How to install: Follow Tutorial
[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.
Also Download: Xiaomi Mi 10i USB Drivers
How to Install Xiaomi Redmi 9T USB Drivers
- Download the Xiaomi Mi USB Driver zip package on your computer and extract it on Desktop.
- Open the Device Manager on your computer by searching device manager from Windows Start Menu.
- Now click on your Computer name in the Device Manager window.
- Now click on Action and then select Add legacy hardware.
- Add Hardware Wizard window should open, click on Next to continue.
- Now select Install the hardware that I manually select from a list (Advanced) option and click on Next.
- Select Show All Devices from the list and click on Next.
- On the next screen, click on Have Disk… to open the Install From Disk window.
- Click on Browse… and navigate to the folder where you have extracted the Xiaomi Mi driver package in Step #1.
- Now, select the Xiaomi Drivers android_winusb.inf file and click on Open and then on OK.
- Select the Android ADB Interface Driver from the list and click on Next.
- Confirm the Hardware driver to install and click on Next to begin the Xiaomi USB Driver installation process.
- Once installed, click on Finish.
- Follow Steps #3 to #13 again and install the Android Composite ADB Interface driver.
- Once all the listed drivers are installed, reboot your computer.
How to Install Xiaomi Redmi 9T USB Drivers Manually
- Download and extract the latest_usb_driver_windows.zip package on your computer.
- Open the Device Manager on your computer by right-clicking Windows Start Button and selecting Device Manager.
- Once the Device Manager window opens, click on your Computer name.
- Now click on Action and then on Add legacy hardware.
- Now Add Hardware Wizard window should pop-up. Click on Next to continue.
- In the next screen, select Install the hardware that I manually select from a list (Advanced) option and click on Next.
- Now select Show All Devices and click on Next.
- Now click on Have Disk… to open the Install From Disk window.
- Click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.
- Now select android_winusb.inf file and click on Open and then on OK.
- Select the Android ADB Interface driver from the list and click on Next.
- Confirm the Hardware driver to install and click on Next to begin the installation process.
- Once installed, click on Finish.
- Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
- Once all the listed drivers are installed, reboot your computer.
How to Install Xiaomi Redmi 9T ADB and Fastboot Drivers
- Download and extract 15 seconds ADB installer on your computer to obtain the adb-setup.exe file.
- Now right click on the adb driver installer setup file and click on Run as administrator.
- Now you’ll see a command prompt window with a blue background and white text.
- It should say, Do you want to install ADB and Fastboot? Press the Y key on your keyboard and hit Enter.
- Now, it should ask whether you want to install ADB system-wide? Again press the Y key and hit Enter.
- Now, the ADB and Fastboot installation process should begin.
- When finished, it should say, Do you want to install device drivers? Press the Y key and hit Enter.
- Now the «Device Driver Installation Wizard» window should open.
- Click on Next to continue installing the Google USB Drivers (WinUSB).
- Once installed, click on Finish and restart your computer.
Important Notes:
[*] Driver Signature Error: If you got Driver Signature Error While installing the Driver then See this Video to fix this problem.
[*] Broken link: Report here.
[*] Have we missed any device model? Let us know by contacting us via Contact Us page.
Reader Interactions
Xiaomi Mi 9T USB Driver for Windows Computer
Xiaomi Mi 9T USB Driver helps you to connect your Xiaomi Device to the Windows Computer and transfer data between the device and the computer. It also allows you to Flash Xiaomi Mi 9T Stock Firmware on your Xiaomi Device using the preloader drivers. Here on this page, we have managed to share the official Xiaomi Mi 9T USB Driver.
It is very necessary to have Xiaomi Mi 9T USB drivers whenever you have to connect Xiaomi Mi 9T to the Pc for the purpose of transferring data or important files. Also, when it comes to updating your Xiaomi Mi 9T manually, it’s necessary to have them on your PC. While you are installing or flashing Fastboot firmware on the device, then Xiaomi USB Drivers are required. Check out the download links given in this post to simply keep up the pace in this matter.
Xiaomi Mi 9T Qualcomm Driver for Windows (11,10,8,7,XP)
Driver Package Name : Qualcomm Mobile Driver for windows
Package File Name: Qualcomm_USB_Driver_v1.0_(USB-Driver.NET).zip
Driver File Size: 19.50 MB
Download Driver File Now
How to install Xiaomi Mi 9T Qualcomm Driver official on Windows
The Xiaomi Mi 9T Qualcomm USB Driver is compatible with the Qualcomm Flash Tool, and the Qualcomm IMEI Tool and can be useful if you are trying to install firmware (ROM) on the device.
Step 1 : Download and extract Xiaomi Mi 9T Qualcomm USB Driver package on the Computer (The link is above). If in case, you have already downloaded and extracted the driver package, then SKIP this step.
Step 2 : Once the Xiaomi Mi 9T driver package is extracted on the computer, you will be able to see the following files:
Step 3 : Open Qualcomm USB Driver.exe to Launch the Setup Window:
Step 4 : Select Ethernet Checkbox and Click on the Next Button:
Step 5 : Click on the Next Button:
Step 6 : Select I accept the Terms Checkbox and Click on the Next Button:
Step 7 : Click on the Install Button:
Step 8 : Again, Click on the Install Button:
Step 9 : Click on the Finish Button to Exit the Setup:
Step 10 : Restart the Computer.
Step 11 : Once the Computer is restarted, you can easily connect your Xiaomi Mi 9T to the computer without facing any issue.
Xiaomi Mi 9T ADB Driver for Windows (11,10,8,7,XP)
Driver Package Name : Android ADB Driver for windows
Package File Name: usb_driver_r13-windows_(USB-Driver.NET).zip
Driver File Size: 8.27 MB
Download Driver File Now
[•] Download Stock Firmware: If you are looking for the Xiaomi Mi 9T Stock Firmware, then head over to the Xiaomi Firmware page.
How4 to install Xiaomi Mi 9T USB drivers
The Xiaomi Mi 9T USB driver makes almost every task that needs to be performed by connecting the device to PC easier. All the files can be transferred in no time without worrying about anything. Also, there are certain benefits to having it. Before you proceed to download, it is suggested to you to remove the previously installed Xiaomi Mi 9T from your PC in case you have installed it. Once you are done, click the below link to download Xiaomi USB Drivers on your PC.
How to install Xiaomi Mi 9T ADB Driver on Windows
Xiaomi ADB Driver can be used to connect the Xiaomi to the computer and transfer data between the mobile and the computer.
Step 1 : Download and extract Xiaomi Mi 9T ADB Driver (.inf based) (The link is above) on the Computer. If in case, you have already downloaded and extracted the driver, then SKIP this step.
Step 2 : Open Device Manager on the Computer. Press Win + R key from the keyboard and type devmgmt.msc and Click on OK Button:
Step 3 : Once the Device Manager is Launched, Click on the Computer Name (name can vary from the image below):
Step 4 : Click on the Action Menu and Select Add Legacy Hardware option:
Step 5 : Under Add hardware Dialog Box, Click on the Next Button:
Step 6 : Tick on the Install the hardware that I manually select from a list checkbox and Click on the Next Button:
Step 7 : Click on the Next Button:
Step 8 : Then Click on the Have Disk Button:
Step 9 : Click on the Browse Button:
Step 10 : Locate the .inf file from the computer (this file can be found in the extracted driver folder).
Step 11 : Click on the OK Button:
Step 12 : Click on the Next button:
Step 13 : Again Click on the Next button:
Step 14 : Click on the Finish button to complete the installation process (ignore Code 10; it will be gone post restarting the computer).
Step 15 : Your Xiaomi Mi 9T driver is listed in the Device Manager.
Step 16 : Now, Restart the Computer. Once the computer is restarted, you can easily connect your Xiaomi Mi 9T device to the computer.
[•] Driver Signature Error: If you got Driver Signature Error While installing the Xiaomi Mi 9T Driver then See this Video to fix this problem.
[•] Request Xiaomi Driver: If you are looking for any specific Xiaomi drivers that is not listed above, then you can request it through the comment box below (do not request driver from the contact page, or else it will be ignored).