Драйвер techno pova 2 для windows

If you are an owner of Tecno Pova 2 and looking out for usb drivers to connect your Android device with the Windows computer, then you have landed in the right place. Download Tecno Pova 2 USB driver from here, install it in your computer and connect your device with a PC or Laptop successfully.

Here, we have provided two usb drivers for your Tecno Pova 2 Android device.

USB Driver Type: Mediatek Driver

USB Driver Purpose: For flashing Stock firmware on your device

File Size: 10 MB

Download Now

USB Driver Type: ADB Driver

USB Driver Purpose: For connecting your device to a computer

File Size: 8.3 MB

Download Now

Steps To Install Tecno Pova 2 Mediatek Driver In Computer

Video Tutorial

If you don’t like this video tutorial or if you would like to get more instructions, then continue reading.

Step 1: To get started, download MediaTek driver and extract it on your desktop.

Step 2: Now, open the driver folder and click «Install Drivers» to initiate the installation process.

Step 3: In the Setup Command Prompt Window, press any key from the keyboard to start the installation process.

Step 4: You will see the Driver Installation Completed message, after successful installation of the MediaTek Driver on your Windows computer.

Step 5: Now, press any key from the keyboard to exit the Setup Window.

Step 6: To finish, restart your computer.

That’s it. You have successfully installed the MediaTek Driver on your Windows computer.

Steps To Install Tecno Pova 2 ADB Driver In Computer

Video Tutorial

If you don’t like this video tutorial or if you would like to get more instructions, then continue reading.

Step 1: To get started, download ADB driver and extract it on your desktop.

Step 2: Now, open Device Manager > Action > Add legacy hardware.

Step 3: Next, click «Next» in the Add legacy hardware wizard.

Step 4: Now choose «Install the hardware that I manually select from the list (Advanced)» and click «Next«.

Step 5: Once done, choose «Show all devices«, click «Next» and select the extracted file manually from your computer.

Step 6: Now to start installing your new hardware, click «Next» again.

Step 7: Click «Install» in the Windows security prompt window.

Step 8: Next, click «Finish» to complete installation.

That’s it. Now you have successfully finished installing ADB driver on your computer. If you encounter any issues while following this tutorial, do let me know via comments.

Tecno Pova 2 phone not connecting to PC only charging? Computer having trouble detecting the Tecno Pova 2 Android phone? It may be caused by the missing Tecno Pova 2 USB Driver or corrupted drivers. To fix Tecno Pova 2 phone not showing up on PC, download Tecno Pova 2 USB Drivers and install them on your computer.

Tecno USB Drivers are essential to seamlessly connect Tecno Pova 2 to a Computer or Laptop over USB. Without the Tecno Pova 2 drivers, the connection will not work, and your computer will have a hard time detecting your phone. On this page, you can download official Tecno Pova 2 USB Drivers for Windows 11, Windows 10, Windows 7, Windows 8.1, and Windows 8, along with Tecno Pova 2 ADB interface drivers and Fastboot drivers.

The Tecno Pova 2 Android USB Drivers allows you to establish a secure and reliable connection between your phone and the computer over the USB connection. It will enable you to connect your phone as an MTP USB device (Media Transfer Protocol) and transfer files and data like images, videos, and documents between your phone and the computer.

The Tecno Pova 2 ADB Driver and Fastboot Driver allows you to pass ADB commands and Fastboot commands right from your computer and perform certain operations on your phone.

The Tecno Mobile Drivers provided here allow you to flash stock firmware, stock recovery, TWRP recovery, CWM recovery, Unlock Bootloader, etc. It also allows you to transfer media, documents, and other files to and from your phone to your computer.

Tecno Pova 2 CDC Driver for Flashing Firmware

Download Now

How to install: Follow Tutorial

Tecno Pova 2 VCOM Driver for Flashing Firmware

Download Now

How to install: Follow Tutorial

Tecno Pova 2 USB Driver for normal connecting to PC

Download Now

How to install: Follow Tutorial

The Tecno Pova 2 Fastboot and ADB drivers can be downloaded below.

Tecno Pova 2 ADB and Fastboot Drivers

Download Now

How to install: Follow Tutorial

[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.

Also Download: Tecno T701 USB Drivers

How to Install Tecno Pova 2 CDC Drivers

1. Download and extract the android-cdc-driver.zip file on your computer.
2. Open Device Manager on your computer by right-clicking the Windows Start Button and selecting Device Manager.
3. Once the Device Manager loads, click on your Computer name.
4. Now click on Action and then on Add legacy hardware.
5. Now Add Hardware Wizard window should open. Click Next to continue.
6. Now select Install the hardware that I manually select from a list (Advanced) option and click on Next.
7. In the next screen, select Show All Devices from the list and click on Next.
8. Now click on Have Disk… to launch Install From Disk window.
9. Click on Browse… and navigate to the folder where you have extracted the Android CDC drivers in Step #1.
10. Now select Android_Gadget_CDC_driver.inf file and click on Open and then on OK.
11. Select Android Gadget VCOM Driver from the list and click on Next.
12. Confirm the Hardware driver to install and click on Next to begin the installation process.
13. Once installed, click on Finish.
14. Follow Steps #3 to #13 again and install the Gadget Serial, MediaTek PreLoader USB VCOM (Android), and MediaTek USB Port drivers.
15. Once all the listed drivers are installed, reboot your computer.

How to Install Tecno Pova 2 VCOM Drivers

1. Download and extract the latest Android VCOM Driver (android-vcom-driver.zip) file to Desktop on your computer.
2. Now open the Device Manager on your computer by right-clicking Windows Start Button and selecting Device Manager.
3. Now click on your Computer name in the Device Manager window.
4. Now click on Action and then click on Add legacy hardware.
5. Now Add Hardware Wizard window should open. Click on Next to continue.
6. Select Install the hardware that I manually select from a list (Advanced) option and click on Next.
7. Select Show All Devices from the list and click on Next.
8. In the next screen, click on Have Disk… to open the Install From Disk window.
9. In the Install From Disk window, click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.
10. Now open Win 7 folder and select usb2ser_Win764.inf driver file if you have the 64-bit version of Windows, otherwise choose usb2ser_Win7.inf file if you have the 32-bit version of Windows. When selected, click on Open and then on OK.
11. Now select the MediaTek DA USB VCOM Port from the list and click on Next.
12. Confirm the Hardware driver to install and click on Next to begin the installation process.
13. Once installed, click on Finish.
14. Follow Steps #3 to #13 again and install the MediaTek PreLoader USB VCOM Port, MTK USB Debug Port, MTK USB Modem Port, and MTK USB Port drivers.
15. Once all the listed drivers are installed, restart your computer.

How to Install Tecno Pova 2 USB Drivers Manually

1. Download the latest_usb_driver_windows.zip file on your computer and extract it on Desktop.
2. Open the Device Manager on your computer by searching device manager from Windows Start Menu.
3. Now click on your Computer name in the Device Manager window.
4. Now click on Action and then select Add legacy hardware.
5. Add Hardware Wizard window should open, click on Next to continue.
6. Now select Install the hardware that I manually select from a list (Advanced) option and click on Next.
7. Select Show All Devices from the list and click on Next.
8. On the next screen, click on Have Disk… to open the Install From Disk window.
9. Click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.
10. Now select android_winusb.inf file and click on Open and then on OK.
11. Select the Android ADB Interface driver from the list and click on Next.
12. Confirm the Hardware driver to install and click on Next to begin the installation process.
13. Once installed, click on Finish.
14. Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
15. Once all the listed drivers are installed, restart your computer.

How to Install Tecno Pova 2 ADB and Fastboot Drivers

1. Download and extract 15 seconds ADB installer on your computer.
2. Now right click on the adb driver installer setup file (adb-setup.exe) and click on Run as administrator.
3. Now a command prompt window with a blue background and white text should open.
4. It should ask whether you want to install ADB and Fastboot? Press the Y key on your keyboard and hit Enter.
5. Now, it should ask whether you want to install ADB system-wide? Again press the Y key and hit Enter.
6. Now, the ADB driver and Fastboot driver installation process should begin.
7. When finished, it should ask whether you want to install device drivers? Press the Y key and hit Enter.
8. Now the «Device Driver Installation Wizard» window should open.
9. Click on Next to continue installing the Google USB Drivers (WinUSB).
10. Once installed, click on Finish and reboot your computer.