Just a moment windows 10 долго что делать

Установка Windows 10 зависает на мгновение Цикл (исправлено)

Windows 10 Install Stuck Just Moment Loop

Решено: Windows 10 зависала на мгновение экране при обновлении или установке. Это займет немного больше времени, чем обычно, но скоро оно будет готово. Легкий путь

Прежде чем что-либо делать, обратите внимание на состояние вашей машины: шумит ли она? Индикатор устройства мерцает или мигает? Если да, то вам следует подождать еще немного.

Если вы уверены, что в данный момент с вашим компьютером ничего не происходит, вам следует подумать о том, чтобы сделать следующее:

Удалите все подключенные USB-устройства, включая клавиатуру, мышь, принтер, USB-накопитель, адаптер переменного тока и т. Д.

Тогда посмотрите, решена ли проблема. После того, как вы сможете войти в свой рабочий стол, подключите или включите Wi-Fi или получите USB-устройство, чтобы система могла идентифицировать устройства. Когда эти устройства будут запущены, перезагрузите компьютер. Теперь проблема должна исчезнуть.

ПРОФЕССИОНАЛЬНЫЙ ТИП:

Когда вы сможете войти в систему, вам может потребоваться проверить, установлены ли у вас подходящие драйверы для ваших устройств. Вы должны это проверить и обновить те, которые этого не сделали.

Driver Easy автоматически распознает вашу систему и найдет для нее подходящие драйверы. Вам не нужно точно знать, в какой системе работает ваш компьютер, вам не нужно рисковать, загружая и устанавливая неправильный драйвер, и вам не нужно беспокоиться о том, что вы ошиблись при установке.

Вы можете автоматически обновлять драйверы с помощью БЕСПЛАТНОЙ или Pro версии Driver Easy. Но с версией Pro требуется всего 2 клика (и вы получаете полную поддержку и 30-дневную гарантию возврата денег):

1) Скачать и установите Driver Easy.

2) Запустите Driver Easy и нажмите Сканировать сейчас кнопка. Затем Driver Easy просканирует ваш компьютер и обнаружит проблемы с драйверами.

3) Щелкните значок Обновить рядом со всеми отмеченными устройствами, чтобы автоматически загрузить и установить правильную версию их драйверов (вы можете сделать это в БЕСПЛАТНОЙ версии).

Источник

Windows 10 застряла на мгновение? Используйте эти решения, чтобы исправить это [Советы по MiniTool]

Windows 10 Just Moment Stuck

Резюме :

Быстрая навигация:

Вы столкнулись с проблемой Windows 10 лишь на мгновение?

К счастью, это можно исправить. Но сначала давайте выясним причины этой проблемы.

Причины зависания Windows 10 на мгновение

Скорость обновления и установки Windows 10 зависит от технических характеристик оборудования, доступного дискового пространства, скорости чтения-записи жесткого диска, скорости подключения к Интернету и многого другого. Если процесс длится слишком долго, вы можете увидеть следующий экран:

Но если что-то не так с оборудованием, жестким диском или подключением к Интернету, Windows 10 зависает. Вероятно, возникнет проблема.

Мы потратили время на поиск доступных решений, а теперь обобщаем их для вас в этой статье.

Решение 1.Проверьте, отвечает ли ПК

Если ваш компьютер все еще отвечает

Вы должны сначала проверить, работает ли ваш компьютер. Чтобы выполнить эту работу, вы можете проверить, не шумит ли машина. Это явный признак того, что процессор еще работает. Конечно, есть и другой вздох: мерцающий свет.

Когда эти два знака показывают, что процессор все еще работает, не вмешивайтесь в этот процесс. Мы уже упоминали выше: скорость процесса зависит от условий подключения к Интернету, свободного дискового пространства на вашем компьютере и т. Д. Подождите и посмотрите.

Если ваш компьютер не отвечает

После этого повторно подключите USB-устройства к компьютеру, а затем проверьте, может ли компьютер нормально работать. Если да, вы можете восстановить подключение к Интернету, чтобы увидеть, может ли процесс обновления или установки выполняться успешно.

Однако, если вышеуказанная мера не работает в вашей ситуации, вам необходимо выполнить полную перезагрузку компьютера: нажмите и удерживайте кнопку питания, пока компьютер не выключится, а затем перезагрузите его.

Если проблема с Windows 10 Just a moment по-прежнему не устранена, вам нужно попробовать следующее решение.

Решение 2. Чистая установка Windows 10

Таким образом, если вас беспокоит, что Windows 10 застряла на мгновенной проблеме, вы можете выполнить чистую установку Windows 10, чтобы попробовать.

В следующем руководстве мы рассмотрим шаги по чистой установке Windows 10, включая следующие три части:

Как восстановить данные с незагружаемого ПК перед установкой

В процессе чистой установки все будет удалено с жесткого диска вашего компьютера. Поэтому мы думаем, вам лучше заранее восстановить данные на внешний диск. Здесь вы можете использовать профессиональные программное обеспечение для восстановления данных : MiniTool Power Data Recovery.

Это программное обеспечение специально разработано для восстановления данных с различных типов устройств хранения данных, включая жесткие диски компьютеров, USB-накопители, карты памяти, SD-карты и т. Д. Эти данные могут быть как удаленными, так и существующими элементами.

Если вы хотите восстановить файлы с компьютера, который обеспокоен проблемой Windows 10, вам необходимо использовать MiniTool Power Data Recovery Bootable Edition, который должен быть создан с помощью MiniTool Snap-in WinPE Bootable Builder.

Однако только выпуски Deluxe и выше предлагают MiniTool Bootable Media Builder. Вам необходимо получить одну из этих редакций в Официальный магазин MiniTool в соответствии с вашей реальной ситуацией. Если вы личный пользователь, Personal Deluxe Edition может полностью удовлетворить ваши потребности.

Получите нормальный рабочий компьютер, чтобы получить это программное обеспечение, а затем обратитесь к следующему руководству, чтобы создать загрузочный носитель и запустить с него незагружаемую машину:

Затем пора восстановить данные с компьютера с помощью этого программного обеспечения:

Шаг 1. Выберите целевой раздел для сканирования

Выберите целевой раздел, с которого нужно восстановить данные, и нажмите на Сканировать кнопку, чтобы начать процесс сканирования.

Наконечник: Если вам нужно получить только некоторые типы файлов, вы можете использовать Настройки функция этого программного обеспечения, чтобы сделать некоторые выборы.

Шаг 2. Выберите файлы, которые хотите восстановить.

Когда процесс сканирования завершится, вы увидите результаты сканирования, классифицированные по пути. Вы можете открыть каждый путь, чтобы найти файлы, которые хотите восстановить.

Обычно на жестком диске вашего компьютера хранится множество файлов, и обычно бывает сложно быстро найти нужные. В этой ситуации вы можете попробовать Тип и найти функции этого программного обеспечения, чтобы легко находить нужные файлы.

Шаг 3. Сохраните выбранные файлы на внешний диск.

Подключите к компьютеру внешний диск, на котором достаточно места для хранения необходимых файлов, а затем проверьте файлы, которые вы хотите восстановить. После этого нажмите кнопку Сохранить кнопку, чтобы выбрать вставленный внешний диск, чтобы сохранить выбранные элементы.

Теперь ваши необходимые данные сохранены в надежном месте. Далее вам нужно создать загрузочный USB-носитель. Перейдите к следующей части, чтобы получить шаги.

Источник

Just a moment windows 10 долго что делать

WiFi should come up as an option to connect after the OS installs. That will only occur if you unplug ethernet cable (otherwise it will probably default to wired connection) and once u see the Network Connect option, click your WiFi SSID and enter the Password/Paraphrase used to get access to that network.

However, Win10 might also not have a built-in driver for your particular Wired / Wireless Adapters, so be mindful of that.

If it is a new Win10 machine, the OS should already be installed, it just needs to load up and then have u enter the info for personalization, such as User Account Name and you should be good to go. You do not have to enter into a new user using Microsoft Live Account; that can always be done at a later time.

Well, It might help to know what pc you have.

Yes what is the Brand+Model of this PC?

If you really do have further issues, I would cotact the OEM brand of the PC

WiFi should come up as an option to connect after the OS installs. That will only occur if you unplug ethernet cable (otherwise it will probably default to wired connection) and once u see the Network Connect option, click your WiFi SSID and enter the Password/Paraphrase used to get access to that network.

However, Win10 might also not have a built-in driver for your particular Wired / Wireless Adapters, so be mindful of that.

If it is a new Win10 machine, the OS should already be installed, it just needs to load up and then have u enter the info for personalization, such as User Account Name and you should be good to go. You do not have to enter into a new user using Microsoft Live Account; that can always be done at a later time.

Источник

Windows 10 ‘Just a moment’ installation error

Microsoft, not surprisingly, is pushing hard to see higher uptake of its latest Windows 10 versions. Fortunately for most, the upgrade process too has been largely hassle free. However, there are also those for whom things haven’t just played out in a copybook manner, with a common grouse being things getting stuck during the closing stages of Windows 10 installation.

The error has come to be referred as the ‘Just a moment‘ error, and is characterised by the dreaded Windows 10 blue screen displaying the above message. Sure there is the spinning ball animation that you can keep yourself engaged with though things easily becomes frustrating after a while, more so if this continues for hours on end.

Fortunately, like with most other things, there is a fix to the above situation. Read on to find out.

‘Just a moment’ Windows 10 fix

Check if your computer has locked up and is not responding

The first thing for you to do will be to ensure your computer has indeed stopped working. For this, see if your PC is making any noise, which should be a clear sign your processor is at work. A flickering light is another tell-tale sign of your processor being hard at work.

If that be the case, try not to tinker with the installation process. There are several factors like the speed of your internet connection, available disk space, processor speed or memory size that can have a direct bearing on your installation time.

However, if you are sure your PC has fallen silent and has indeed got stuck at the seemingly infinite loop displaying the ‘Just a moment’ message, there are a few things you can do to set things back on track.

Unplug all USB devices attached to the PC, which should include even the keyboard and mouse along with the printer or any USB drive.

Disable all network connection, which means turning off Wi-Fi along with disconnecting any internet cable attached to the PC.

Reconnect the mouse and keyboard and see if you can gain control of the PC. If it does, establish internet connectivity again and see if the installation process gets started.

However, in case none of the above works than you might have to perform a hard reboot (press and hold on to the power button until your system shuts down or restarts on its own). In most cases, this should fix the issue and for the rest of the installation to proceed normally.

Go for a fresh installation of Windows 10

If the above steps have yielded a null, opt for installing Window 10 again. This should rewrite all the files again and hopefully, avoid the situation that led it to freeze at the ‘Just a moment’ screen. So if you have the bootable Windows 10 installation either in a disk or a USB, insert/attach it to the PC and restart.

In case you are attempting a new installation using a bootable USB drive, you might have to change the boot order from BIOS to prioritise loading from the USB drive above all else. To get into BIOS, press F2 when the computer restarts and change boot order to ensure USB drive appears first. However, the computer restarts several times during installation. Change the boot order subsequently to allow hard drive being at the top.

When installing from Windows 10 sysprep image

It is not unusual for your installation to freeze at the ‘Just a moment’ screen when you are attempting loading from a syspreped image of Windows 10. In such a scenario a proven way to prevent the above error to creep in will be to boot into Audit Mode right at the start when your system boots and before you select ‘Use Express Setting’. Press Ctrl+Shift+F3 to get into Audit Mode. Thereafter, add / remove software and then sysprep OOBE.

So that is it. This should serve as a comprehensive guide to prevent the ‘Just a moment’ error that has plagued many a Windows 10 installations worldwide.

You can also have more information about Windows 10 installations from the following articles.

Источник

Windows 10 Install Stuck at Just a moment Loop [Fixed]

Last Updated: 4 years ago

Just a moment loop If your Windows 10 Upgrade or Install hangs or failed during the installation, and you’re seeing circle saying Just a moment but you’ve waited for centuries, you’re not alone. Many Windows users are reporting this problem as well. But no worries, it’s possible to fix.
The speed of your upgrade is related to your hardware specification, disk space, hard disk read-write speeds and the speed of your Internet connection etc. If the process is taking you too much time, like extraordinarily long time, you might even see the notification below:

Before you begin to do anything, please pay attention to the status of your machine: is it making any noise? Is the device’s light flickering or flashing? If the answers are yes, then you should wait for some longer time.

If you are sure that there is nothing going on with your computer at the moment, you should consider doing the following things:

Remove any USB devices plugged in, including keyboard, mouse, printer, USB drive, AC adapter etc.

Then see if the problem is solved. Once you are able to log into your desktop, plug in or turn on Wi-Fi, or have USB device to have the system to identify the devices. Once theses devices are up and running, restart your computer. The problem should be gone now.

PRO TIP:

When you’re able to log in, you may need to check if you have the right drivers for your devices. You should verify this, and update those that don’t.

If you don’t have the time, patience or computer skills to update your drivers manually, you can do it automatically with Driver Easy.

Driver Easy will automatically recognize your system and find the correct drivers for it. You don’t need to know exactly what system your computer is running, you don’t need to risk downloading and installing the wrong driver, and you don’t need to worry about making a mistake when installing.

You can update your drivers automatically with either the FREE or the Pro version of Driver Easy. But with the Pro version it takes just 2 clicks (and you get full support and a 30-day money back guarantee):

2) Run Driver Easy and click the Scan Now button. Driver Easy will then scan your computer and detect any problem drivers.

3) Click the Update button next to all flagged devices to automatically download and install the correct version of their drivers (you can do this with the FREE version).

Or click Update All to automatically download and install the correct version of all the drivers that are missing or out of date on your system (this requires the Pro version – you’ll be prompted to upgrade when you click Update All).

Источник

Windows 10 Just a moment stuck is not a rare issue and many users reflect they have encountered this issue when updating your Windows operating system or reinstalling Windows without an installation medium. Are you also looking for an effective method to get rid of this issue? You come to the right place. In this article, we will show you two available solutions.

Are You Facing Windows 10 Just a Moment Issue?

Sometimes, your computer may boot into a screen saying Just a moment. Yes, you just wait for centuries but only find Windows 10 Just a moment is stuck. This issue always happens when updating the system or reinstalling Windows 10 without an installation medium.

You are not alone. When you search for this issue on the internet, you will discover that many users are bothered by Windows 10 stuck on Just a moment and the phenomenon are various, such as Windows 10 Just a moment then black screen, Windows 10 Just a moment after update, and so forth.

Fortunately, it is possible to fix it. But firstly, let’s find out the causes of this issue.

Reasons for Windows 10 Stuck on Just a Moment

The speed of Windows 10 update and installation relies on the hardware specification, available disk space, hard drive read-write speeds, the speed of internet connection, and more. When the process lasts too long, you may see the following screen:

But, if there is something wrong with the hardware, hard disk, or the internet connection, Windows 10 stuck on Just a moment issue is likely to happen.

We have spent time looking for the available solutions and now we summarize them for you in this article.

Solution 1: Check Whether the PC Is Responding

If Your Computer Is Still Responding

You should first check whether your computer is still working. To do this job, you can go to check if the machine is making any noise. It is a clear sign of whether the processor is still at work. Of course, there is the other sigh: a flickering light.

When these two signs show that the processor is still at work, do not tinker with that process in progress. We have mentioned above: the process speed is possible decided by the internet connect condition, free disk space on your computer, etc. Wait and see.

If Your Computer Is Not Responding

If your computer has fallen into silent and stuck on the seemingly infinite loop: Just a moment, you can consider doing these things:

• Disable network devices, turn off Wi-Fi and unplug network cable if there is any.
• Remove any USB devices which are connected with the computer, including keyboard, mouse, printer, USB drive, AC adapter, and so on.

After that, reconnect the USB devices to your PC and then check whether the computer can run normally. If yes, you can re-establish the internet connectivity to see whether the update or installation process can run successfully.

However, if the above measure doesn’t work for your situation, you need to perform a hard restart of your computer: press and hold on the power button until your computer shuts down and then reboot it.

If Windows 10 Just a moment issue still persists, you need to try the next solution.

Solution 2: Clean Install Windows 10

When your computer is having performance and other issues, the most effective way to get rid of the issues is to perform a clean installation. This way will remove everything from the hard drive on your machine and start from scratch.

Thus, when you are bothered by Windows 10 stuck on Just a moment issue, you can clean install Windows 10 to have a try.

In the following guide, we will walk through the steps to clean install Windows 10 including these three parts:

• How to restore data from the unbootable PC before installation
• How to create a USB bootable media of Windows 10
• How to perform a clean installation of Windows 10

How to Restore Data from the Unbootable PC before Installation

The clean installation process will delete everything from your computer hard drive. So, we think you’d better restore your data to an external drive in advance. Here, you can use the professional data recovery software: MiniTool Power Data Recovery.

This software is specially designed to recover data from various types of data storage devices, including computer hard drives, USB flash drives, memory cards, SD cards, and more. These data can be both deleted and existing items.

If you want to restore files from a computer which is bothered by Windows 10 Just a moment issue, you need to use MiniTool Power Data Recovery Bootable Edition that should be built by a MiniTool Snap-in WinPE Bootable Builder.

However, only the advanced editions offer MiniTool Bootable Media Builder. You need to get one of these editions from the MiniTool official store according to your actual situation.

Get a normal working computer to obtain this software and then refer to the following guide to build a bootable medium and start the unbootable machine from it:

• How to Build Boot CD/DVD Discs and Boot Flash Drive with Bootable Media Builder?
• How to Boot from Burned MiniTool Bootable CD/DVD Discs or USB Flash Drive?

Then, it’s time to restore data from the computer with this software:

Step 1: Choose the target partition to scan

Choose the target partition you need to restore data from and click on the Scan button to start the scanning process.

Step 2: Choose the files you want to recover

When the scanning process ends, you can see the scan results which are classified by path. You can open each path to find the files you want to restore.

Usually, there are numerous files on your computer hard drive and it is usually difficult to find out the needed ones quickly. In this situation, you can try the Type and Find features of this software to locate your needed files easily.

Additionally, with the Bootable Edition, you can preview the image files and text files which are no larger than 20MB. That is to say, when you are not sure whether it is the image or text file you need to restore, you can use the Preview feature to identify.

Step 3: Save the selected files to the external drive

Connect an external drive which has enough space to store your needed files to your computer and then check the files you want to restore. After that, press the Save button to choose the inserted external drive to keep the selected items.

Now, your needed data is saved to a safe place. Next, you need to create a USB bootable medium. Go to the next part the get the steps.

Click to Tweet

How to Create a USB Bootable Medium of Windows 10

The direct way to create a USB bootable medium is to use the Media Creation Tool. Here, you need to prepare a USB flash drive of at least 8GB and a normal working computer.

After that, you can follow these steps to create a USB bootable medium:

1. Go to the Windows 10 download page on the web browser.

2. Click the Download tool now button and save the file on your computer.

3. Find the downloaded file and then double-click on it to launch it.

4. Press the Accept button to agree to the Applicable notices and license terms.

5. Choose the Create installation media (USB flash drive, DVD, or ISO file) for another PC option and click on the Next button to continue.

6. In the following interface, you can select language, architecture, and edition you want to use. Since you are not going to clean install Windows 10 on this current working machine, you need to make sure that the Use the recommended options for this PC option IS NOT CHECKED.

7. Click Next.

8. Select the USB flash drive option and click the Next button to continue.

9. Click on the USB flash drive you want to make it bootable and click Next.

10. When you see the Your USB flash drive is ready interface, press the Finish button to end the process.

After these steps, you can use this USB flash drive to perform a clean install on the computer which is bothered by Windows 10 stuck on Just a moment issue.

Click to Tweet

How to Perform a Clean Installation of Windows 10

To perform a clean install of Windows 10 with the bootable USB flash drive, you need to follow these steps:

1. Set your computer to boot from the USB flash drive.

2. When entering the Windows setup interface, press the Next button to start the process.

3. When entering the following interface, click the Install Now button to continue.

4. If you’re upgrading an old version, you must input a genuine product key. However, if you’re reinstalling Windows 10, you can press the I don’t have a product key option to continue if your computer has been activated.

5. Choose a Windows 10 edition that must match your product key and press the Next button to continue.

6. Check the I accept the license terms option and then press Next to continue.

7. Choose the Custom: Install Windows only (Advanced) option to continue.

8. Then you need to choose where to install Windows 10. Usually, it is a partition on Drive 0 that contains the current installation of Windows. Then, press the Delete button to remove it from the hard drive.

9. Click the OK button on the popup window to confirm the deletion.

10. Choose the empty partition and click on the Next button to start the installation process.

After the installation, you still need to customize the out-of-box experience to create a new account and set up your environment. Now, you can follow this post to do the job: How to Complete the Out of Box Experience (OOBE) in Windows 10.

After a clean install of Windows 10, we believe that you can use your computer as usual.

Bottom Line

When you are getting in the trouble of Windows 1 Just a moment loop, you can refer to these two solutions mentioned in this post to help you out.

If you are bothered by some other issues when dealing with this issue, you can just send an email to [email protected] or let us know in the comment. Of course, you can also share your opinions or suggestions here.

Если ваш Обновление или установка Windows 10 зависает или не работает во время установки, и вы видите круг с надписью Момент но вы ждали веками, вы не одиноки. Многие пользователи Windows также сообщают об этой проблеме. Но не беспокойтесь, это можно исправить.
Скорость вашего обновления зависит от технических характеристик вашего оборудования, дискового пространства, скорости чтения-записи жесткого диска, скорости вашего подключения к Интернету и т. Д. Если процесс занимает у вас слишком много времени, например, чрезвычайно долго, вы можете даже увидеть уведомление ниже:

Прежде чем что-либо делать, обратите внимание на состояние вашей машины: шумит ли она? Индикатор устройства мерцает или мигает? Если да, то вам следует подождать еще немного.

Если вы уверены, что в данный момент с вашим компьютером ничего не происходит, вам следует подумать о том, чтобы сделать следующее:

• Отключите сетевые устройства, выключите Wi-Fi и отсоедините сетевой кабель, если он есть.

• Удалите все подключенные USB-устройства, включая клавиатуру, мышь, принтер, USB-накопитель, адаптер переменного тока и т. Д.

Тогда посмотрите, решена ли проблема. После того, как вы сможете войти в свой рабочий стол, подключите или включите Wi-Fi или получите USB-устройство, чтобы система могла идентифицировать устройства. Когда эти устройства будут запущены, перезагрузите компьютер. Теперь проблема должна исчезнуть.

ПРОФЕССИОНАЛЬНЫЙ ТИП:

Когда вы сможете войти в систему, вам может потребоваться проверить, установлены ли у вас подходящие драйверы для ваших устройств. Вы должны это проверить и обновить те, которые этого не сделали.

---

---

Если у вас нет времени, терпения или навыков работы с компьютером для обновления драйверов вручную, вы можете сделать это автоматически с помощью Водитель Easy .

Driver Easy автоматически распознает вашу систему и найдет для нее подходящие драйверы. Вам не нужно точно знать, в какой системе работает ваш компьютер, вам не нужно рисковать, загружая и устанавливая неправильный драйвер, и вам не нужно беспокоиться о том, что вы ошиблись при установке.

Вы можете автоматически обновлять драйверы с помощью БЕСПЛАТНОЙ или Pro версии Driver Easy. Но с версией Pro требуется всего 2 клика (и вы получаете полную поддержку и 30-дневную гарантию возврата денег):

---

---

1) Скачать и установите Driver Easy.

2) Запустите Driver Easy и нажмите Сканировать сейчас кнопка. Затем Driver Easy просканирует ваш компьютер и обнаружит проблемы с драйверами.

3) Щелкните значок Обновить рядом со всеми отмеченными устройствами, чтобы автоматически загрузить и установить правильную версию их драйверов (вы можете сделать это в БЕСПЛАТНОЙ версии).

Или нажмите «Обновить все», чтобы автоматически загрузить и установить правильную версию всех драйверов, которые отсутствуют или устарели в вашей системе (для этого требуется Pro версия — вам будет предложено выполнить обновление, когда вы нажмете «Обновить все»).

Is your PC stuck on Just a moment loop? Your Windows may have failed to install one or more updates properly and caused a system failure. Or a software you installed may have corrupted the system files. Or something may have corrupted your boot partition.

The simplest solution that you can do is to perform a restart of your PC. Windows should try to reload the required updates again. Hopefully, this should prevent the loop screen from appearing. But if it doesn’t work, you may have a real problem here.

Below, I have compiled a few approaches to help resolve the issue. I have arranged the methods in the order of severity of the issue. Make sure you start working from the first approach. Continue working your way down until the endless Windows 10 blue screen goes away.

Logging Into Safe Mode

Before diving into the actual steps, it is important to learn how to boot your Windows 10 into safe mode. Safe mode is a feature of Windows that boots Windows with the least number of required files. This means disabling any additional drivers, startup software, anti-virus programs, etc.

Safe Mode also restricts the use of certain applications so you cannot use it the same way as normal mode. It is merely for troubleshooting purposes. Once you are done using Safe Mode, you can just restart the computer and it will boot back to normal mode.

Use the following steps to log into Windows with safe mode enabled.

1. Force shut down your device by holding the power button for at least 10 seconds.
2. Press the power button. When the manufacturer’s logo appears, hold the power button for 10 seconds again.
   
3. Press the power button again.
4. When the Windows logo appears, hold the power button for 10 seconds.
5. Press the power button again one last time.
6. When the device starts up, it will enter winRE(Recovery Environment).
7. Under Choose an option, select Troubleshoot.
8. Select Advanced options.
9. Select Startup Settings.
10. Select Restart.
11. When the device restarts, under the list of options select option 5. You can also press F5 for Safe Mode with Networking.

Modifying System Notifications

1. Start Windows in Safe Mode.
2. Right-click on the Start Menu and select Settings.
3. Select System option in the new window.
4. Under the left navigation pane, select Notifications & actions.
5. Uncheck the following two options under Notifications.
   • “Show me the Windows welcome experience after updates and occasionally when I sign in to highlight what’s new and suggested“
   • “Suggest ways I can finish setting up my device to get the most out of Windows“
6. Restart your PC and try logging back into Normal mode.

Disable Automatic Restart

1. Start Windows in Safe Mode.
2. Press Win key + R to open the Run window.
3. Type sysdm.cpl and press OK to bring up a new window.
4. Go to the Advanced tab.
5. Under Start-up and Recovery, select Settings.
6. Uncheck the Automatically restart option.
7. Check the Write an event to the system log option.
8. Press OK.
9. Select Apply and OK to close the window.
10. Restart PC into normal mode.

Using Windows 10 Media Creation Tool

1. Start Windows in Safe Mode.
2. Go to this link in the browser.
3. Click on the Download tool now.
4. Once complete, head over to the Downloads folder.
5. Double-click on the newly-downloaded MediaCreationTool2xxx.exe file to open it.
6. Select Accept to accept all applicable notices and license terms.
7. Select Upgrade this PC now.
8. Click on Next.
9. The system tool will now download and install Windows 10 upgrade on its own. Note that you do not need to enter a product key to reinstall Windows 10.
10. When the tool completes downloading, select Change what to keep.
11. Select Keep personal files and apps or Keep personal files only. If you select Nothing it will remove everything and install a fresh copy of Windows 10 instead.
12. When ready, select Install.
13. Note that it is normal for Windows 10 to restart multiple times when installing.

Using Windows Registry Editor

1. Start Windows in Safe Mode.
2. Press Win key + R to open the Run window.
3. Type regedit and press OK to bring up a new window.
4. Navigate to the following path.
   HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsNTCurrentVersionProfileList
5. Firstly, back up the registry key by going to the File menu and selecting Export.
6. Save the file to a secure location.
7. Now, expand the ProfileList from the left navigation pane.
8. Select the first entry under ProfileList.
9. Check to see if there is a ProfileImagePath registry key on it.
10. If yes, remove the entry completely by pressing the Delete key.
11. Repeat Steps 7-9 for each entry under ProfileList.

Using Bootrec Command

1. Start Windows in Safe Mode.
2. Right-click on Start Menu and select Windows Powershell(Admin) to open a new window.
3. Type the following commands one after the other.
4. Once completed, restart your PC after exiting safe mode.

Using Automatic Repair

1. Power off Windows by pressing the power button for 10 seconds.
2. Power it back on.
3. When the logo appears, hold the power button for another 10 seconds to power it off.
4. Repeat Steps 1-3 several times. You will see the Preparing Automatic Repair message underneath the Windows logo screen.
5. Under the Automatic Repair screen, select Advanced options.
6. Select Troubleshoot.
7. Select Command Prompt.
8. Type the following to enter into the system config folder.
   cd C:windowssystem32config
9. Md backupto create a new backup directory. You need this in case you need to restore your config files.
10. Copy *.* backup to copy all system config files to the backup folder.
11. Cd regback to go to the regback folder.
12. Copy *.* .. to copy all files inside regback to the system config folder.
13. A to select All from the input prompt to overwrite all files.
14. Exit to close the command prompt.
15. Select Turn off your PC.
16. Power it back on.

Using Reset Your PC

1. Start Windows in Safe Mode.
2. Right-click on Start Menu and select Settings.
3. Select Update & Security.
4. On the left navigation pane, select Recovery.
5. Under Reset this PC, select Get started.
6. Select one of two options.
   • Keep my files  when you need to remove just the apps and keep your files and data.
   • Remove everything when you need to remove all apps and personal files.
7. Once complete, restart your PC normally.

Using Startup Settings

1. Power off Windows by pressing the power button for 10 seconds.
2. Power it back on.
3. When the logo appears, hold the power button for another 10 seconds to power it off.
4. Repeat Steps 1-3 several times. You should see the Preparing Automatic Repair message on the Windows logo screen.
5. Under the Automatic Repair screen, select Advanced options.
6. Select Startup Settings.
7. Select Restart.
8. When Windows restarts, try with one of the following options disabled.
   • Driver signature enforcement by pressing 7 or F7
   • Early-launch anti-malware protection by pressing 8 or F8
   • Automatic restart on system failure by pressing 9 or F9
9. Continue on the boot process to see if you can get past the Please wait screen.
10. If unsuccessful, repeat the steps and try disabling the next option.
11. Repeat until you identify what caused the issue.

Using System Restore

1. Power off Windows by pressing the power button for 10 seconds.
2. Power it back on.
3. When the logo appears, hold the power button for another 10 seconds to power it off.
4. Repeat Steps 1-3 several times. You should see the Preparing Automatic Repair message on the Windows logo screen.
5. Under the Automatic Repair screen, select Advanced options.
6. Select System Restore.
7. Select a restore point that you would like to restore to. All files and data that were created or modified past this restore point will be deleted. This will include apps as well as data.

Using System File Checker and CHKDSK Utility

1. Start Windows in safe mode.
2. Right-click on Start Menu and select Powershell(Admin).
3. Type sfc /scannow and press Enter. This will launch the system file checker tool to scan all system files and reports if corrupted. It replaces the files with a cached copy located in a compressed folder at C:System32dllcache.
4. Type chkdsk /f /r /x C: and press Enter. This will do the following operations.
   • /f will lock the disk and fixes any errors
   • /r will locate the bad sectors and recover readable information
   • /x will force the disk to dismount and invalidate all open handles to the drive
   • C: is the target disk where you have installed your Windows 10.
5. Once completed, restart Windows in normal mode.

Perform a Clean Installation

1. Get a USB thumb drive with at least 8GB of storage.
2. Start Windows in Safe Mode.
3. Plug the USB drive into your PC. Make sure that you back up any files in the drive before moving ahead.
4. Go to this link in the browser.
5. Click on the Download tool now.
6. Once complete, head over to the Downloads folder.
7. Double-click on the newly-downloaded MediaCreationTool2xxx.exe file.
8. Select Accept to accept all applicable notices and license terms.
9. Select Create installation media.
10. Check Use the recommended options for this PC option. This will automatically fill in the details required to fix your current PC.
11. Alternatively, if you are doing this on a second PC, make sure you fill in the proper information needed for your broken PC.
12. Select Next.
13. Select USB flash drive and click on Next.
14. Select the USB drive letter from the displayed list.
15. Select Next.
16. Wait until you see the Your USB flash drive is ready message and click on Finish.
17. With the USB drive still plugged in, restart your PC. 
18. Boot into the USB drive. Check your manufacturer to see how you can change boot order settings inside the BIOS menu.
19. In the Windows Setup window, select Next.
20. Select Install now.
21. As you already have a licensed Windows, you don’t need to enter the product key. Click on I don’t have a product key. Windows will later verify your copy of Windows digitally.
22. Select the edition of Windows 10 that you own.
23. Check the I accept the license terms option and select Next.
24. Select Custom: Install Windows only.
25. Select which drive you want to install Windows on. Normally, the first drive Drive 0 corresponds to the drive C where Windows is currently installed. The goal here is to replace current Windows but keep files in all other drives untouched.
26. Select Drive 0 and click on Delete.
27. After deleting, choose the empty partition and click on Next.
28. Wait until Windows 10 is installed in the system properly. All your files will be intact but the Windows 10 is replaced with the latest version of it. Note that you will need to reinstall all of your software and apps again after this.

27.05.2019, 20:27. Показов 7687. Ответов 1

---

__________________
Помощь в написании контрольных, курсовых и дипломных работ, диссертаций здесь

0