Не удалось произвести форматирование ошибка 0х80070057 windows 7

To help you completely get rid of the problem of «Windows could not format a partition on disk 0. The error occurred while preparing the partition selected for installation. Error code: 0x80070057», we gathered the three most effective methods for you.

What’s Error code: 0x80070057 — Windows Could Not Format a Partition on Disk 0

If you come across error code 0x80070057, it means there was a problem with your storage solution, whether it’s a hard drive or SSD. Since error code 0x80070057 is typically related to storage problems, it usually appears when you’re attempting to install a new application or run a Windows update. It’s also possible for it to appear when you upgrade to Windows 10 from an older version of Windows, like Windows 7 or 8.1.

«Windows could not format a partition on disk 0» is one of the most commonly seen errors related to the error code 0x80070057. Do you know what this error implies, or how to remove the error and continue installing the Windows operating system?

Similar Issues with «Windows Could Not Format a Partition on Disk 0»

Making an installation media, backing up all important data, you have done all the preparation job and started to reinstall Windows, but just getting stuck during the process because Windows could not format the partition while preparing the partition selected for installation? This will finally result in «Windows cannot be installed to disk 0 partition 1» error. You are not the only one. Many other users have such an unpleasant experience in Windows 10/8/7. 

Oftentimes, in different Windows versions, you may get different error messages. For example:

• Windows was unable to complete the format
• windows could not create a partition on disk 0
• Failed to format the selected partition in Windows 7
• Windows cannot format the system partition on this disk
• We couldn’t format the selected partition in Windows 8/10

Following these messages, there are different error codes like 0x80070057 or 0x8004242d. Next, let’s learn how to fix the error step by step.

How to Fix «Windows Could Not Format a Partition on Disk 0»

Quick navigation of all 3 solutions to Windows could not format a partition on disk 0:

1. Fix 1. Format partition from bootable partition manager
2. Fix 2. Format partition during Windows installation
3. Fix 3. Format partition from the command prompt

Fix 1. Format Partition Using EaseUS Bootable Partition Manager 

EaseUS Partition Master is a relaible bootable format tool that you can download and install on your PC. It can fully help you efficiently fix the ‘Windows cannot format partition on disk 0’ error in simple clicks.

With it, you can select «Create WinPE bootable disk» on the main window.  Connect the bootable USB and open EaseUS Partition Master, then follow the steps below:

Step 1. Run EaseUS Partition Master, right-click the hard drive partition you intend to format and choose «Format».

Step 2. In the new window, set the Partition label, File system (NTFS/FAT32/EXT2/EXT3/EXT4/exFAT), and Cluster size for the partition to be formatted, then click «OK».

Step 3. Then you will see a warning window, click «Yes» in it to continue.

Step 4. Click the «Execute 1 Task(s)» button to review the changes, then click «Apply» to start formatting the partition on your hard drive.

Fix 2. Format Partition During the Windows Installation Process

To fix the issue, you can first choose to delete the existing partitions, create a new partition, and continue with the formatting. 

Step 1. Boot from the Windows installation DVD, click Install Now. 

Step 2. At the setup screen, click Custom (Advanced).

Step 3. Delete all the partitions on disk 0.

Step 4. Create a new partition of the unallocated space on disk 0. 

Step 5. Select the partition to install Windows on and then continue with the install.

Sometimes, you may get the error «We couldn’t create a new partition» in step 4. When it occurs, move on and try to format the partition in Command Prompt Window or bootable partition manager to solve the problem.

Fix 3. Format Partition Using Diskpart in Command Prompt

Windows command prompt is a comprehensive and reliable method for users to solve most of the hard drive issues. To be able to format a system partition on disk 0, you must create a Windows 10 or Windows 7 installation media in advance. For example, to solve the Windows 7 could not format a partition on disk 0, you should do like this:

Step 1. Boot the computer with the Windows 7 installation USB or DVD. Instead of selecting «Install Windows 7», select «Repair Your Computer» and then select «Use Recovery Tools…»

Step 2. In the next windows, select Command Prompt (admin)

Step 3. In the command prompt, type the following command lines and press Enter after each line:

• diskpart
• list disk
• select disk 0
• clean
• create partition primary
• select partition 1
• active
• format fs=ntfs

Finally, exit the Command Prompt and try to install Windows again.

Which Way Do You Prefer to Solve the «Windows Could Not Format a Partition on Disk 0»?

This article offers three full solutions to the full error message «Windows could not format a partition on disk 0…error code 0x80070057» that you encountered during the Windows 7/8/10 installation. You can apply the solutions to solve the other similar errors like [Windows could not format the system partition on this disk], [failed to format the selected partition], [Windows could not create a partition on disk 0], etc.

The first solution is handy and direct, you can start all over to install the Windows operating system by just deleting all the partitions and create new ones. 

The second command prompt solution is effective, though it’s recognized as the most complicated method among the three. Many average users would be afraid of attempting at the first stage of creating a Windows installation media.

The final partition manager solution from third-party is relatively easier than the command prompt one, and safer than the first installation fix. You don’t have to delete all partitions nor apply the sophisticated diskpart command lines, but effortlessly fix the problem of not being able to install Windows due to the format failure procedure.

FAQs About Windows Could Not Format a Partition on Disk 0 Issue

Here in this part, we listed some hot topics that many users asked online and if you have more questions about Windows could not format a partition on Disk 0 issue, follow and find answers here:

1. How do I fix Windows 10 cannot be installed on drive 0 partitions 1?

Here is a list of solutions that you can apply to fix Windows 10 cannot be installed on drive 0 partition 1 error:

• Delete existing partitions on Disk 0 by using CMD or Disk Management.
• Convert disk 0 from GPT to MBR with reliable disk conversion software like EaseUS Partition Master.

For a detailed guide, you can refer to this page for help: Windows Cannot Be Installed to Disk 0 Partition 1. 

2. Why Windows cannot be installed to disk 0 partition 1?

Mostly, when you come up with the ‘Windows cannot e installed to Disk 0 Partition 1’ error while installing Windows, the main reason is the target computer is not set with UEFI boot mode, but the disk is bigger than 2TB. When this issue comes up on your PC, the best solution is to convert the target disk 0 from MBR to GPT. You can follow this guide to convert MBR to GPT in simple clicks. 

3. How do I fix Windows could not format?

Multiple reasons can result in the ‘Windows could not format’ issue. You can turn to the following listed methods to fix this issue:

• Use format software like EaseUS Partition Master to complete the format.
• Use CMD to format.
• Use Disk Management to format.
• Scan and clear malware or viruses.

For more details, you can refer to this page for help: 7 Fixes for Windows Was Unable to Complete the Format. 

To help you completely get rid of the problem of «Windows could not format a partition on disk 0. The error occurred while preparing the partition selected for installation. Error code: 0x80070057», we gathered the three most effective methods for you.

What’s Error code: 0x80070057 — Windows Could Not Format a Partition on Disk 0

If you come across error code 0x80070057, it means there was a problem with your storage solution, whether it’s a hard drive or SSD. Since error code 0x80070057 is typically related to storage problems, it usually appears when you’re attempting to install a new application or run a Windows update. It’s also possible for it to appear when you upgrade to Windows 10 from an older version of Windows, like Windows 7 or 8.1.

«Windows could not format a partition on disk 0» is one of the most commonly seen errors related to the error code 0x80070057. Do you know what this error implies, or how to remove the error and continue installing the Windows operating system?

Similar Issues with «Windows Could Not Format a Partition on Disk 0»

Making an installation media, backing up all important data, you have done all the preparation job and started to reinstall Windows, but just getting stuck during the process because Windows could not format the partition while preparing the partition selected for installation? This will finally result in «Windows cannot be installed to disk 0 partition 1» error. You are not the only one. Many other users have such an unpleasant experience in Windows 10/8/7. 

Oftentimes, in different Windows versions, you may get different error messages. For example:

• Windows was unable to complete the format
• windows could not create a partition on disk 0
• Failed to format the selected partition in Windows 7
• Windows cannot format the system partition on this disk
• We couldn’t format the selected partition in Windows 8/10

Following these messages, there are different error codes like 0x80070057 or 0x8004242d. Next, let’s learn how to fix the error step by step.

How to Fix «Windows Could Not Format a Partition on Disk 0»

Quick navigation of all 3 solutions to Windows could not format a partition on disk 0:

1. Fix 1. Format partition from bootable partition manager
2. Fix 2. Format partition during Windows installation
3. Fix 3. Format partition from the command prompt

Fix 1. Format Partition Using EaseUS Bootable Partition Manager 

EaseUS Partition Master is a relaible bootable format tool that you can download and install on your PC. It can fully help you efficiently fix the ‘Windows cannot format partition on disk 0’ error in simple clicks.

With it, you can select «Create WinPE bootable disk» on the main window.  Connect the bootable USB and open EaseUS Partition Master, then follow the steps below:

Step 1. Run EaseUS Partition Master, right-click the hard drive partition you intend to format and choose «Format».

Step 2. In the new window, set the Partition label, File system (NTFS/FAT32/EXT2/EXT3/EXT4/exFAT), and Cluster size for the partition to be formatted, then click «OK».

Step 3. Then you will see a warning window, click «Yes» in it to continue.

Step 4. Click the «Execute 1 Task(s)» button to review the changes, then click «Apply» to start formatting the partition on your hard drive.

Fix 2. Format Partition During the Windows Installation Process

To fix the issue, you can first choose to delete the existing partitions, create a new partition, and continue with the formatting. 

Step 1. Boot from the Windows installation DVD, click Install Now. 

Step 2. At the setup screen, click Custom (Advanced).

Step 3. Delete all the partitions on disk 0.

Step 4. Create a new partition of the unallocated space on disk 0. 

Step 5. Select the partition to install Windows on and then continue with the install.

Sometimes, you may get the error «We couldn’t create a new partition» in step 4. When it occurs, move on and try to format the partition in Command Prompt Window or bootable partition manager to solve the problem.

Fix 3. Format Partition Using Diskpart in Command Prompt

Windows command prompt is a comprehensive and reliable method for users to solve most of the hard drive issues. To be able to format a system partition on disk 0, you must create a Windows 10 or Windows 7 installation media in advance. For example, to solve the Windows 7 could not format a partition on disk 0, you should do like this:

Step 1. Boot the computer with the Windows 7 installation USB or DVD. Instead of selecting «Install Windows 7», select «Repair Your Computer» and then select «Use Recovery Tools…»

Step 2. In the next windows, select Command Prompt (admin)

Step 3. In the command prompt, type the following command lines and press Enter after each line:

• diskpart
• list disk
• select disk 0
• clean
• create partition primary
• select partition 1
• active
• format fs=ntfs

Finally, exit the Command Prompt and try to install Windows again.

Which Way Do You Prefer to Solve the «Windows Could Not Format a Partition on Disk 0»?

This article offers three full solutions to the full error message «Windows could not format a partition on disk 0…error code 0x80070057» that you encountered during the Windows 7/8/10 installation. You can apply the solutions to solve the other similar errors like [Windows could not format the system partition on this disk], [failed to format the selected partition], [Windows could not create a partition on disk 0], etc.

The first solution is handy and direct, you can start all over to install the Windows operating system by just deleting all the partitions and create new ones. 

The second command prompt solution is effective, though it’s recognized as the most complicated method among the three. Many average users would be afraid of attempting at the first stage of creating a Windows installation media.

The final partition manager solution from third-party is relatively easier than the command prompt one, and safer than the first installation fix. You don’t have to delete all partitions nor apply the sophisticated diskpart command lines, but effortlessly fix the problem of not being able to install Windows due to the format failure procedure.

FAQs About Windows Could Not Format a Partition on Disk 0 Issue

Here in this part, we listed some hot topics that many users asked online and if you have more questions about Windows could not format a partition on Disk 0 issue, follow and find answers here:

1. How do I fix Windows 10 cannot be installed on drive 0 partitions 1?

Here is a list of solutions that you can apply to fix Windows 10 cannot be installed on drive 0 partition 1 error:

• Delete existing partitions on Disk 0 by using CMD or Disk Management.
• Convert disk 0 from GPT to MBR with reliable disk conversion software like EaseUS Partition Master.

For a detailed guide, you can refer to this page for help: Windows Cannot Be Installed to Disk 0 Partition 1. 

2. Why Windows cannot be installed to disk 0 partition 1?

Mostly, when you come up with the ‘Windows cannot e installed to Disk 0 Partition 1’ error while installing Windows, the main reason is the target computer is not set with UEFI boot mode, but the disk is bigger than 2TB. When this issue comes up on your PC, the best solution is to convert the target disk 0 from MBR to GPT. You can follow this guide to convert MBR to GPT in simple clicks. 

3. How do I fix Windows could not format?

Multiple reasons can result in the ‘Windows could not format’ issue. You can turn to the following listed methods to fix this issue:

• Use format software like EaseUS Partition Master to complete the format.
• Use CMD to format.
• Use Disk Management to format.
• Scan and clear malware or viruses.

For more details, you can refer to this page for help: 7 Fixes for Windows Was Unable to Complete the Format. 

Многие сталкиваются с ошибкой 0x80070057 в Windows. Обычно сбой случается на этапе форматирования раздела, в который делается попытка инсталляции. Эта ошибка довольно масштабна и может появляться при работе Центра обновления Windows или резервном копировании.

Что за ошибка, из-за чего возникает?

Ошибка с кодом 0x80070057 означает неисправность центра обновления или ошибку при установке Windows 7, 8, 10. Также ошибка иногда возникает при архивации данных или форматировании диска. Чтобы верно установить причину неполадки, нужно изучить описание. Главные причины:

• параметр задан неверно;
• внезапный сбой при копировании;
• загрузка повреждённых файлов обновления, либо некорректное обновление;
• внесение администратором изменений в групповую политику;
• невозможность форматировать жесткий диск, съёмный носитель, раздел (сообщение: не удалось произвести форматирование);
• неполадка с жестким диском;
• сбои, вызванные вирусами.

Если ошибка с кодом 0x80070057 возникает при установке Windows 7, 8, 10, то обычно достаточно сменить жесткий диск, проверить его на ошибки или поменять дистрибутив Виндовс.

А вот если сбой происходит в рабочей системе, то способов решения будет больше.

Изменение реестра

Перед тем, как добавлять ключи, лучше создавать резервную копию (когда есть такая возможность). Если ошибка появляется и при сохранении копии реестра, выполните действия:

1. После открытия редактора с помощью «regedit» в консоли «Выполнить» (Win+R) в ветке HKLM через группу «Software» нужно найти блок «Policies». Там есть папка «Microsoft», где расположен каталог «System».
2. В меню правки нажмите «Создать», либо щёлкните правой клавишей мышки по пустому месту в правой области окна, далее выбирайте «Создать параметр DWORD», принимая в расчёт разрядность (х64 либо х86), и введите «CopyFileBufferedSynchronousIo». Вновь щёлкните правой клавишей по ключу и нажмите «Изменения». В поле поставьте «1», подтвердите операцию, кликнув по «OK», и закройте реестр. Обычно ошибка пропадает.

Чистая загрузка системы

Иногда исправить ошибку 0x80070057 может помочь чистая загрузка Виндовс, т.е. без сторонних служб и процессов:

Установка автоматического обновления

Также стоит проверить настройки автоматического обновления системы:

• откройте «Панель управления — Центр обновлений Windows — Настройка параметров»;
• нажмите опцию «Устанавливать обновления автоматически».

Проверка жёсткого диска

Также стоит проверить жесткий диск на наличие ошибок:

1. Нажимайте Win+R, откроется командная строчка, введите «cmd». Осуществить данную операцию нужно с полными правами, для чего в поисковом окошке (запускается щелчком по знаку лупы внизу экрана) вводите «cmd» и на иконке опции «Командная строка» жмите правой кнопкой мышки и кликните по опции «Запуск от имени администратора» (либо нажимайте правой кнопкой мышки на неё в правой области окошка).

Если директория в командной строчке отлична от «С:Windowssystem 32>» — у пользователя нет прав полного доступа.

1. В новом окошке укажите «chkdsk /f /r». После сканирования выполните перезагрузку ПК и проверьте обновления.
2. Если ошибка не исправилась, снова вызовите командную строчку и укажите «sfc /scannow».

Можно попытаться восстановить повреждённое хранилище: наберите «Dism/Online/Cleanup-Image/Restore Health» в командной строчке.

Проверка центра обновлений

Откройте командную строчку (с правами Администратора) и по очереди выполните данные команды:

• Остановка служб:

  net stop bits
  net stop wuauserv
  net stop appidsvc
  net stop cryptsvc

• Запуск служб:

  net start bits
  net start wuauserv
  net start appidsvc
  net start cryptsvc

Проверка на вирусы

Выполните проверку компьютера утилитой «Dr.Web CureIt» на вредоносные коды.

Просканируйте ПК и если утилита обнаружила вирусы, после их обезвреживания перезагрузите компьютер.

Рекомендуется делать проверку с другого устройства либо через LiveCD (USB).

При выявлении вируса нужно следовать советам, выводимым утилитой. Но, обезвреживание вируса не даст полной гарантию исправления ошибки, ведь вирус мог произвести некоторые изменения в ОС. В связи с чем, вероятно, придётся добавочно воспользоваться одним из других методов устранения ошибки с кодом 0x800700057.

Изменение свойств разделителя

Также можно попробовать изменить настройки разделителя целой и дробной части числа:

Вновь используйте службу архивации Windows и проверьте, что ошибки больше нет.

Проверка групповых политик

Не лишним будет проверка настройки групповых политик:

• нажмите «Win+R» и укажите «gpedit.msc»;
• переходите «Конфигурация ПК» — «Административные шаблоны» — «Компоненты Windows» — «Центр обновления»;
• отыщите «Настройка автоматического обновления». Должно быть указано: «Не задана». Если параметр иной, кликните 2 раза по нему, задав указанное выше значение.

Переименование папки обновлений

Иногда помогает переименование папки обновления:

• кликните «Win+R» и введите «%SystemRoot%» для открытия системного каталога;
• отыщите «SoftwareDistributon», задайте папке имя «SoftwareDistributon.old»;
• перезапустите ПК и проверьте, исправлена ли неполадка.

Если при переименовании появится сообщение: «Операцию нельзя завершить, т. к. данные папки открыты в иной программе», запускайте командую строчку с полными правами и вводите поочерёдно команды остановки служб (см. выше).

Когда они будут остановлены, сумеете переименовать «SoftwareDistributon». Снова запускайте службы командами их запуска (см. выше). Затем перезапустите ПК.

Перерегистрация всех UWP приложений

Если ошибка появляется при запуске приложений из магазина Виндовс, поможет переустановка всех UWP и сброс кеша Microsoft Store:

• запускайте PowerShell (с полными правами) через поиск по системе и укажите апплет:

  Get-AppXPackage | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.InstallLocation)AppXManifest.xml"}

  

• перезапустите ПК и проверьте, появляется ли ошибка;
• если всё нормально, нажимайте «Win+R» и введите «wsreset» для очистки кэша Microsoft Store.

Восстановление системы

Радикальный способ – возврат системы к исходному состоянию (на примере Windows 10). Использовать данный вариант лучше в крайнем случае, когда другие методы не устранили неполадку, ведь в результате получите чистую ОС с личными данными либо без таковых (исходя из выбранного способа инсталляции).

Приступим:

• вызовите меню, нажав «Win+I»;
• перейдите в блок «Обновление/безопасность»;
• нажмите на «Восстановление»;
• нажмите «Начать», увидите сообщение с просьбой задать параметры сброса ОС.

1-й способ — полная очистка системного тома от файлов и переустановка ОС без применения диска с дистрибутивом, 2-й метод — быстрая установка Windows 10 с сохранением файлов пользователя и настроек программ (приложения не сохраняются).

Есть ещё 1 способ вызова диалога сброса ОС, даже не авторизуясь в ней. Проходит всё на экране авторизации. Чтобы открыть доступ к опции, нажмите по значку «Перезагрузка», зажав «Shift». После чего кликните по иконке «Диагностика», далее щёлкните по «Возврат ОС в исходное состояние».

Достоинства метода: не требуются установочные флешка/диск, а также полностью автоматическое выполнение.

Минус лишь один — при удалении образа системы или нахождении файла в испорченных секторах жесткого диска сделать оперативную переустановку не получится, но в Виндовс 10 возможно использовать пару добавочных инструментов: диск восстановления системы (что редко, т. к. обычно его нет) и резервирование системы посредством инструментов ОС на томе, отличном от системного.

Также есть возможность использовать точку восстановления.

В Windows 10 процедура следующая:

Иначе, выберите опцию «Выбрать иную точку восстановления» путём клика левой кнопкой мышки по пустому кружочку рядом с ней и кликните по «Далее», в окошке щёлкните левой кнопкой мыши по строчке с желаемой точкой восстановления и нажимайте на «Далее».

Кликните по «Готово».

В Windows 7 алгоритм немного отличается:

Приквел проблемы 1: Симптомы

Приквел проблемы 2: Первая ошибка
Так вот… дело дошло до переустановки Windows. Плавно добрался до выбора разделов, выбрал локальный диск С (где и был установлен старый Windows) и нажал на «Далее» без форматирования.

Система предупредила что будет установлен Windows, а старый будет сохранен в папке Old Windows но я не смогу им воспользоваться. Такой феномен вижу впервые… Обрадовавшись что сохраню важные документы и т.п. я согласился и нажал на ОК . Установка пошла… но на втором пункте после «Распаковки файлов» установка зависла на «0%…«. На окошке было написано «Во время установки компьютер перезагрузится несколько раз» или что то вроде этого. Т.к. комп не не перезагружался (см. Приквел проблемы 1), установка выдала ошибку (не помню какую). Так же подумал наверное ошибка из за того что не форматнул диск, но форматирование должно было произвести автоматически…

Ошибка 0х80070057
Не унывая попытался повторно произвести установку. Но на этот раз застрял в выборе разделов… При попытке форматировать локальный диск С система выдала ошибку 0х80070057… такая же ошибка во время установки но теперь уже в первом разделе: «Распаковка файлов»… Так же разбивал диски, но безуспешно. Искал причину и решение в Гоогле (Google)… предлагают Викторию, акронисы, парагонии, LiveCD, покапаться в BIOS-е, сбросить что-то, где-то, и т.д…. Ни того, ни друго, ни третьего, ни четвертого под рукой нет! Одни говорили причина была в оперативке (которую вынули и всунули обратно после чего заработало), другие в блок питании, третьи о том что ЖД сгорел, надо купить новый и т.д. и т.п….

Решение
В гугле решения почти нет… у некоторых проблема само собой решилась, или же мастер починил, купили новый ЖД, некоторым предложенные выше программы помогли… короче ничего, что помогло бы МНЕ!
Решил воспользоваться подсказкой «Звонок другу»… Вынул свой ЖД и подсоединил в комп друга… у бедняги после этого то монитор не включался то зависал после включения (там где нажмите на Tab и Del, для входа в BIOS)… до установки не доходил. Вот теперь ПАНИКА!

Как и в любом индийском фильме у нас тоже будет HAPPY END или как говорят в народе Хэппи Епд.
К счастью для меня у него был еще один комп, точнее комп его брата! Уверенности было мало, но подобно любому главному герою индийских фильмов я нашел в себе супер силы, одним прыжком допрыгнул до компа, силой мысли открыл системный блок, и подсоединил свой ЖД.
Ну а дальше скажем без иронии и фантазии (а то что то уже много написал).
УСТАНОВИЛ WINDOWS 7 БЕЗ ПРОБЛЕМ НА ДРУГОМ КОМПЬЮТЕРЕ НА СВОЙ ЖД!

Вот так добрые рыцари и победили злобную Ошибку 0х80070057! Тхе Епд!
(Хех… ну и фантазия… Мне бы Книги писать)

P.S. Установил с того же диска с которого у меня не получилось!

Но я так и не понял в чем была причина появления этой ошибки!

To help you completely get rid of the problem of «Windows could not format a partition on disk 0. The error occurred while preparing the partition selected for installation. Error code: 0x80070057», we gathered the three most effective methods for you.

What’s Error code: 0x80070057 — Windows Could Not Format a Partition on Disk 0

If you come across error code 0x80070057, it means there was a problem with your storage solution, whether it’s a hard drive or SSD. Since error code 0x80070057 is typically related to storage problems, it usually appears when you’re attempting to install a new application or run a Windows update. It’s also possible for it to appear when you upgrade to Windows 10 from an older version of Windows, like Windows 7 or 8.1.

«Windows could not format a partition on disk 0» is one of the most commonly seen errors related to the error code 0x80070057. Do you know what this error implies, or how to remove the error and continue installing the Windows operating system?

Similar Issues with «Windows Could Not Format a Partition on Disk 0»

Making an installation media, backing up all important data, you have done all the preparation job and started to reinstall Windows, but just getting stuck during the process because Windows could not format the partition while preparing the partition selected for installation? This will finally result in «Windows cannot be installed to disk 0 partition 1» error. You are not the only one. Many other users have such an unpleasant experience in Windows 10/8/7. 

Oftentimes, in different Windows versions, you may get different error messages. For example:

• Windows was unable to complete the format
• windows could not create a partition on disk 0
• Failed to format the selected partition in Windows 7
• Windows cannot format the system partition on this disk
• We couldn’t format the selected partition in Windows 8/10

Following these messages, there are different error codes like 0x80070057 or 0x8004242d. Next, let’s learn how to fix the error step by step.

How to Fix «Windows Could Not Format a Partition on Disk 0»

Quick navigation of all 3 solutions to Windows could not format a partition on disk 0:

1. Fix 1. Format partition from bootable partition manager
2. Fix 2. Format partition during Windows installation
3. Fix 3. Format partition from the command prompt

Fix 1. Format Partition Using EaseUS Bootable Partition Manager 

EaseUS Partition Master is a relaible bootable format tool that you can download and install on your PC. It can fully help you efficiently fix the ‘Windows cannot format partition on disk 0’ error in simple clicks.

With it, you can select «Create WinPE bootable disk» on the main window.  Connect the bootable USB and open EaseUS Partition Master, then follow the steps below:

Step 1. Run EaseUS Partition Master, right-click the hard drive partition you intend to format and choose «Format».

Step 2. In the new window, set the Partition label, File system (NTFS/FAT32/EXT2/EXT3/EXT4/exFAT), and Cluster size for the partition to be formatted, then click «OK».

Step 3. Then you will see a warning window, click «Yes» in it to continue.

Step 4. Click the «Execute 1 Task(s)» button to review the changes, then click «Apply» to start formatting the partition on your hard drive.

Fix 2. Format Partition During the Windows Installation Process

To fix the issue, you can first choose to delete the existing partitions, create a new partition, and continue with the formatting. 

Step 1. Boot from the Windows installation DVD, click Install Now. 

Step 2. At the setup screen, click Custom (Advanced).

Step 3. Delete all the partitions on disk 0.

Step 4. Create a new partition of the unallocated space on disk 0. 

Step 5. Select the partition to install Windows on and then continue with the install.

Sometimes, you may get the error «We couldn’t create a new partition» in step 4. When it occurs, move on and try to format the partition in Command Prompt Window or bootable partition manager to solve the problem.

Fix 3. Format Partition Using Diskpart in Command Prompt

Windows command prompt is a comprehensive and reliable method for users to solve most of the hard drive issues. To be able to format a system partition on disk 0, you must create a Windows 10 or Windows 7 installation media in advance. For example, to solve the Windows 7 could not format a partition on disk 0, you should do like this:

Step 1. Boot the computer with the Windows 7 installation USB or DVD. Instead of selecting «Install Windows 7», select «Repair Your Computer» and then select «Use Recovery Tools…»

Step 2. In the next windows, select Command Prompt (admin)

Step 3. In the command prompt, type the following command lines and press Enter after each line:

• diskpart
• list disk
• select disk 0
• clean
• create partition primary
• select partition 1
• active
• format fs=ntfs

Finally, exit the Command Prompt and try to install Windows again.

Which Way Do You Prefer to Solve the «Windows Could Not Format a Partition on Disk 0»?

This article offers three full solutions to the full error message «Windows could not format a partition on disk 0…error code 0x80070057» that you encountered during the Windows 7/8/10 installation. You can apply the solutions to solve the other similar errors like [Windows could not format the system partition on this disk], [failed to format the selected partition], [Windows could not create a partition on disk 0], etc.

The first solution is handy and direct, you can start all over to install the Windows operating system by just deleting all the partitions and create new ones. 

The second command prompt solution is effective, though it’s recognized as the most complicated method among the three. Many average users would be afraid of attempting at the first stage of creating a Windows installation media.

The final partition manager solution from third-party is relatively easier than the command prompt one, and safer than the first installation fix. You don’t have to delete all partitions nor apply the sophisticated diskpart command lines, but effortlessly fix the problem of not being able to install Windows due to the format failure procedure.

FAQs About Windows Could Not Format a Partition on Disk 0 Issue

Here in this part, we listed some hot topics that many users asked online and if you have more questions about Windows could not format a partition on Disk 0 issue, follow and find answers here:

1. How do I fix Windows 10 cannot be installed on drive 0 partitions 1?

Here is a list of solutions that you can apply to fix Windows 10 cannot be installed on drive 0 partition 1 error:

• Delete existing partitions on Disk 0 by using CMD or Disk Management.
• Convert disk 0 from GPT to MBR with reliable disk conversion software like EaseUS Partition Master.

For a detailed guide, you can refer to this page for help: Windows Cannot Be Installed to Disk 0 Partition 1. 

2. Why Windows cannot be installed to disk 0 partition 1?

Mostly, when you come up with the ‘Windows cannot e installed to Disk 0 Partition 1’ error while installing Windows, the main reason is the target computer is not set with UEFI boot mode, but the disk is bigger than 2TB. When this issue comes up on your PC, the best solution is to convert the target disk 0 from MBR to GPT. You can follow this guide to convert MBR to GPT in simple clicks. 

3. How do I fix Windows could not format?

Multiple reasons can result in the ‘Windows could not format’ issue. You can turn to the following listed methods to fix this issue:

• Use format software like EaseUS Partition Master to complete the format.
• Use CMD to format.
• Use Disk Management to format.
• Scan and clear malware or viruses.

For more details, you can refer to this page for help: 7 Fixes for Windows Was Unable to Complete the Format. 

To help you completely get rid of the problem of «Windows could not format a partition on disk 0. The error occurred while preparing the partition selected for installation. Error code: 0x80070057», we gathered the three most effective methods for you.

What’s Error code: 0x80070057 — Windows Could Not Format a Partition on Disk 0

If you come across error code 0x80070057, it means there was a problem with your storage solution, whether it’s a hard drive or SSD. Since error code 0x80070057 is typically related to storage problems, it usually appears when you’re attempting to install a new application or run a Windows update. It’s also possible for it to appear when you upgrade to Windows 10 from an older version of Windows, like Windows 7 or 8.1.

«Windows could not format a partition on disk 0» is one of the most commonly seen errors related to the error code 0x80070057. Do you know what this error implies, or how to remove the error and continue installing the Windows operating system?

Similar Issues with «Windows Could Not Format a Partition on Disk 0»

Making an installation media, backing up all important data, you have done all the preparation job and started to reinstall Windows, but just getting stuck during the process because Windows could not format the partition while preparing the partition selected for installation? This will finally result in «Windows cannot be installed to disk 0 partition 1» error. You are not the only one. Many other users have such an unpleasant experience in Windows 10/8/7. 

Oftentimes, in different Windows versions, you may get different error messages. For example:

• Windows was unable to complete the format
• windows could not create a partition on disk 0
• Failed to format the selected partition in Windows 7
• Windows cannot format the system partition on this disk
• We couldn’t format the selected partition in Windows 8/10

Following these messages, there are different error codes like 0x80070057 or 0x8004242d. Next, let’s learn how to fix the error step by step.

How to Fix «Windows Could Not Format a Partition on Disk 0»

Quick navigation of all 3 solutions to Windows could not format a partition on disk 0:

1. Fix 1. Format partition from bootable partition manager
2. Fix 2. Format partition during Windows installation
3. Fix 3. Format partition from the command prompt

Fix 1. Format Partition Using EaseUS Bootable Partition Manager 

EaseUS Partition Master is a relaible bootable format tool that you can download and install on your PC. It can fully help you efficiently fix the ‘Windows cannot format partition on disk 0’ error in simple clicks.

With it, you can select «Create WinPE bootable disk» on the main window.  Connect the bootable USB and open EaseUS Partition Master, then follow the steps below:

Step 1. Run EaseUS Partition Master, right-click the hard drive partition you intend to format and choose «Format».

Step 2. In the new window, set the Partition label, File system (NTFS/FAT32/EXT2/EXT3/EXT4/exFAT), and Cluster size for the partition to be formatted, then click «OK».

Step 3. Then you will see a warning window, click «Yes» in it to continue.

Step 4. Click the «Execute 1 Task(s)» button to review the changes, then click «Apply» to start formatting the partition on your hard drive.

Fix 2. Format Partition During the Windows Installation Process

To fix the issue, you can first choose to delete the existing partitions, create a new partition, and continue with the formatting. 

Step 1. Boot from the Windows installation DVD, click Install Now. 

Step 2. At the setup screen, click Custom (Advanced).

Step 3. Delete all the partitions on disk 0.

Step 4. Create a new partition of the unallocated space on disk 0. 

Step 5. Select the partition to install Windows on and then continue with the install.

Sometimes, you may get the error «We couldn’t create a new partition» in step 4. When it occurs, move on and try to format the partition in Command Prompt Window or bootable partition manager to solve the problem.

Fix 3. Format Partition Using Diskpart in Command Prompt

Windows command prompt is a comprehensive and reliable method for users to solve most of the hard drive issues. To be able to format a system partition on disk 0, you must create a Windows 10 or Windows 7 installation media in advance. For example, to solve the Windows 7 could not format a partition on disk 0, you should do like this:

Step 1. Boot the computer with the Windows 7 installation USB or DVD. Instead of selecting «Install Windows 7», select «Repair Your Computer» and then select «Use Recovery Tools…»

Step 2. In the next windows, select Command Prompt (admin)

Step 3. In the command prompt, type the following command lines and press Enter after each line:

• diskpart
• list disk
• select disk 0
• clean
• create partition primary
• select partition 1
• active
• format fs=ntfs

Finally, exit the Command Prompt and try to install Windows again.

Which Way Do You Prefer to Solve the «Windows Could Not Format a Partition on Disk 0»?

This article offers three full solutions to the full error message «Windows could not format a partition on disk 0…error code 0x80070057» that you encountered during the Windows 7/8/10 installation. You can apply the solutions to solve the other similar errors like [Windows could not format the system partition on this disk], [failed to format the selected partition], [Windows could not create a partition on disk 0], etc.

The first solution is handy and direct, you can start all over to install the Windows operating system by just deleting all the partitions and create new ones. 

The second command prompt solution is effective, though it’s recognized as the most complicated method among the three. Many average users would be afraid of attempting at the first stage of creating a Windows installation media.

The final partition manager solution from third-party is relatively easier than the command prompt one, and safer than the first installation fix. You don’t have to delete all partitions nor apply the sophisticated diskpart command lines, but effortlessly fix the problem of not being able to install Windows due to the format failure procedure.

FAQs About Windows Could Not Format a Partition on Disk 0 Issue

Here in this part, we listed some hot topics that many users asked online and if you have more questions about Windows could not format a partition on Disk 0 issue, follow and find answers here:

1. How do I fix Windows 10 cannot be installed on drive 0 partitions 1?

Here is a list of solutions that you can apply to fix Windows 10 cannot be installed on drive 0 partition 1 error:

• Delete existing partitions on Disk 0 by using CMD or Disk Management.
• Convert disk 0 from GPT to MBR with reliable disk conversion software like EaseUS Partition Master.

For a detailed guide, you can refer to this page for help: Windows Cannot Be Installed to Disk 0 Partition 1. 

2. Why Windows cannot be installed to disk 0 partition 1?

Mostly, when you come up with the ‘Windows cannot e installed to Disk 0 Partition 1’ error while installing Windows, the main reason is the target computer is not set with UEFI boot mode, but the disk is bigger than 2TB. When this issue comes up on your PC, the best solution is to convert the target disk 0 from MBR to GPT. You can follow this guide to convert MBR to GPT in simple clicks. 

3. How do I fix Windows could not format?

Multiple reasons can result in the ‘Windows could not format’ issue. You can turn to the following listed methods to fix this issue:

• Use format software like EaseUS Partition Master to complete the format.
• Use CMD to format.
• Use Disk Management to format.
• Scan and clear malware or viruses.

For more details, you can refer to this page for help: 7 Fixes for Windows Was Unable to Complete the Format. 

__________________
Помощь в написании контрольных, курсовых и дипломных работ, диссертаций здесь