Ошибка 1068 при запуске службы брендмауэры windows

When you try to run Network and Sharing Center or Windows Defender Firewall, it shows “error 1068: the dependency service or group failed to start”? There could be various reasons responsible for this problem. MiniTool Partition Wizard offers you some solutions to fix error 1068. Feel free to have a try!

What Is Error 1068

There are two cases in which you may encounter error 1068 in Windows 10.

1. Case one: When you run Network and Sharing Center, it shows “Error 1068: The dependency service or group failed to start”. If you are affected by this issue, you will be incapable of connecting to the internet on any network no matter whetheryou use an Ethernet cable or connect it
2. Case two: Error 1068 when starting Windows Firewall. Sometimes the message “Error 1068- dependency service failed to start firewall” pops up when you try to turn on your Windows Defender Firewall. Do not turn a blind eye to it because disabling Windows Firewall makes your computer exposed to unauthorized access.

How to fix “error 1068: the dependency service or group failed to start”?

If you see the problem for the first time, you can restart your computer to remove it. However, if the error still shows after the operation, you need to troubleshoot it with the following solutions.

Quick Video Guide:

Fix Error 1068 in Case One

If you meet error 1068 when you use Network and Sharing Center, you can try these ways to fix it.

Solution 1: Enable Related Dependency Services

As you can see in this error message, there is something wrong with the dependency services and you need to make sure that all the related dependency services are enabled.

Here are the steps to solve dependency service failed to start.

Step 1: Press Win + S to open Search, and then input system configuration in the search box.

Step 2: Click System Configuration App in the search result to get into it.

Step 3: Click Services tab, and make sure you have checked all the following options.

• Application Layer Gateway Service
• Network Connections
• Network Location Awareness (NLA)
• Plug and Play
• Remote Access Auto Connection Manager
• Remote Access Connection Manager
• Remote Procedure Call (RPC)
• Telephony

Step 4: Click OK to confirm changes you have made, and then restart your computer.

After restarting your computer, you can open Network and Sharing Center and check whether error 1068 in Windows 10 has been fixed.

Solution 2: Modify Registry Key

If you still see the message “error 1068: the dependency service or group failed to start” after you enable related dependency services, you can try to use Registry Editor to fix the problem.

Step 1: Press Windows and R key at the same time to get into Run window.

Step 2: Type Regedit in the box and click OK to open Registry Editor.

Step 3: Navigate to the following path:

HKEY_LOCAL_MACHINE > SYSTEM > CurrentControlSet > Services > Dhcp

Step 4: Double-click DependOnService from the right pane.

Step 5: In the Value data text area, delete all the words except “Afd”, and then click OK.

Step 6: Go to HKEY_LOCAL_MACHINE > SYSTEM > CurrentControlSet > Services > Eaphost.

Step 7: Double-click DependOnServices and delete everything in the Value data. Then click OK to confirm changes.

Step 8: Restart your computer and there should be no error message when you use Network and Sharing Center.

Solution 3: Repair Nlasvc.dll

A common reason for “dependency service failed to start” is corrupted or damaged nlasvc.dll.

Nlasvc.dll, also known as Network Location Awareness, is a type of Dynamic Link Library (DLL) file. It collects and stores configuration information for the network and notifies programs when this information is modified.

If there is something wrong with nlasvc.dll, any services that depend on it will fail to start, such as Windows and Sharing Center.

To repair nlasvc.dll, you can run SFC (System File Checker).

Run SFC to Restore Nlasvc.dll

Step 1: Open Run window and type cmd in the box. Then press Ctrl + Shift + Enter to run command prompt as administrator.

Step 2: Type sfc /scannow and hit Enter.

Then SFC will scan for nlasvc.dll issues and any other system file problems automatically.

Solution 4: Reset TCP//IP to Default

If “error 1068: the dependency service or group failed to start” still cannot be fixed, you can try to reset TCP/IP to default.

Step 1: Run command prompt as administrator.

Step 2: Type the command “netsh int ip reset” to completely reset TCP/IP configuration and restore TCP/IP to its original state, and then hit Enter.

Step 3: Restart your PC and check whether Network and Sharing Center can run properly.

Fix Error 1068 in Case Two

“Error 1068 — dependency service failed to start firewall” is something you don’t want to experience. It is quite annoying that you cannot turn on your Windows Defender Firewall.

What can you do if you got the error “dependency service failed to start firewall”? Here are several solutions which may be helpful for you.

Solution 1: Change Service Settings

Step 1: Input services.msc in Run window.

Step 2: Right-click your Windows Defender Firewall and select Properties.

Step 3: Choose Start and then set the start-up type to Automatic.

Step 4: Select Apply and click OK.

Step 5: Restart your PC to save changes.

Solution 2: Expand Your Administrators Group

There is another free way to fix the error 1068.

You just need to open command prompt as admin and input the commands below.

• net localgroup administrators localservice /add
• net localgroup administrators networkservice /add

Now you have to restart your Windows and turn on Windows Defender Firewall to check whether “the dependency service or group failed to start” has been solved.

Solution 3: Update Your Network Adapter Driver

Network adapter driver that is out-of-data could also be a cause for “error 1068 — dependency service failed to start firewall”.

To update your Network adapter driver, you can follow these steps.

Step 1: Press Windows key and X at the same time.

Step 2: Select Device Manager from the list.

Step 3: Click the arrow before Network adapters to expand it.

Step 4: Right-click the driver which is currently used, and choose Update driver.

Step 5: Restart your computer to apply the changes.

You can read more details about how to update the Network adapter driver in this article: Top 4 Ways to Fix Slow Internet Speed on Windows 10.

Solution 4: Disable Your Antivirus Temporarily

If you are running a third-party antivirus software, it might be in conflict with your Windows Defender Firewall, and the error 1068 will stops you turning on Windows Defender Firewall.

You can turn your antivirus software off and check if the issue has been solved. If the answer is yes, you need to report the issue to the vendor of your antivirus app, or you can replace the app with another antivirus software.

If the solution cannot fix the problem, you need to try the next one.

Solution 5: Check Your Windows Update

Sometimes, “error 1068: the dependency service or group failed to start” is simply caused by something out-of-date in your Windows. To solve it, you just need a few clicks.

Step 1: Open Settings by pressing Win + I.

Step 2: Click Update & Security to get into Windows Update.

Step 3: In Windows Update, Select check for updates. Then download the available updates and confirm the installation process.

Step 4: Restart your computer and run Windows Defender Firewall to see if error 1068 “dependency service failed to start firewall” has been removed.

Solution for Any Case

If you cannot fix error 1068 with the solutions above, you may need to reinstall your Windows 10.

By reinstalling Windows 10, you can solve the problems due to system file corruption, system settings changes, third-party software and so on. It is kind of annoying, but it is a really effective way to fight with “error 1068: the dependency service or group failed to start”.

In addition, to make sure error 1068 can be completely removed, you’d better perform a clean install.

There are two ways to achieve it:

• Reset This PC (Remove everything)
• Clean Install

You can get instructions on how to use Reset this PC (Remove everything) to fix error 1068 in the following text.

Before you start to reset your PC, you’d better back up your data.

You can use a USB flash drive or an external hard drive to make backup. Pay attention that the backup device needs to be large enough to store all the files and programs in your disk.

Step 1: In the first place, download and install MiniTool Partition Wizard.

Free Download

Step 2: Launch the tool and select Copy Disk Wizard from the action panel.

Step 3: Follow the wizard to finish backup process.

After you back up your files, you can reset your PC to fix error 1068.

Step 1: Click Start and select the Settings icon.

Step 2: Choose Update & Security, and then click Recovery.

Step 3: Click Get started under Reset this PC section.

Step 4:Choose Remove everythingto reset this PC, and then follow the pop-up instructions.

Then Windows 10 will reset your PC and perform a clean install. Once it’s done, you can go and check whether error 1068 has been fixed.

With MiniTool Partition Wizard, I successfully back up data and reset my PC to fix error 1068. I’d like to share it with you!Click to Tweet

Bottom Line

If you are bothered by “error 1068: the dependency service or group failed to start”, don’t be annoyed. You can fix it with solutions above.

If you have better ways to solve this problem, you can contact [email protected]. For any questions, you are free to post it in the comment section below and you will be replied as soon.

Error 1068 FAQ

When you try to run Network and Sharing Center or Windows Defender Firewall, it shows “error 1068: the dependency service or group failed to start”? There could be various reasons responsible for this problem. MiniTool Partition Wizard offers you some solutions to fix error 1068. Feel free to have a try!

What Is Error 1068

There are two cases in which you may encounter error 1068 in Windows 10.

1. Case one: When you run Network and Sharing Center, it shows “Error 1068: The dependency service or group failed to start”. If you are affected by this issue, you will be incapable of connecting to the internet on any network no matter whetheryou use an Ethernet cable or connect it
2. Case two: Error 1068 when starting Windows Firewall. Sometimes the message “Error 1068- dependency service failed to start firewall” pops up when you try to turn on your Windows Defender Firewall. Do not turn a blind eye to it because disabling Windows Firewall makes your computer exposed to unauthorized access.

How to fix “error 1068: the dependency service or group failed to start”?

If you see the problem for the first time, you can restart your computer to remove it. However, if the error still shows after the operation, you need to troubleshoot it with the following solutions.

Quick Video Guide:

Fix Error 1068 in Case One

If you meet error 1068 when you use Network and Sharing Center, you can try these ways to fix it.

Solution 1: Enable Related Dependency Services

As you can see in this error message, there is something wrong with the dependency services and you need to make sure that all the related dependency services are enabled.

Here are the steps to solve dependency service failed to start.

Step 1: Press Win + S to open Search, and then input system configuration in the search box.

Step 2: Click System Configuration App in the search result to get into it.

Step 3: Click Services tab, and make sure you have checked all the following options.

• Application Layer Gateway Service
• Network Connections
• Network Location Awareness (NLA)
• Plug and Play
• Remote Access Auto Connection Manager
• Remote Access Connection Manager
• Remote Procedure Call (RPC)
• Telephony

Step 4: Click OK to confirm changes you have made, and then restart your computer.

After restarting your computer, you can open Network and Sharing Center and check whether error 1068 in Windows 10 has been fixed.

Solution 2: Modify Registry Key

If you still see the message “error 1068: the dependency service or group failed to start” after you enable related dependency services, you can try to use Registry Editor to fix the problem.

Step 1: Press Windows and R key at the same time to get into Run window.

Step 2: Type Regedit in the box and click OK to open Registry Editor.

Step 3: Navigate to the following path:

HKEY_LOCAL_MACHINE > SYSTEM > CurrentControlSet > Services > Dhcp

Step 4: Double-click DependOnService from the right pane.

Step 5: In the Value data text area, delete all the words except “Afd”, and then click OK.

Step 6: Go to HKEY_LOCAL_MACHINE > SYSTEM > CurrentControlSet > Services > Eaphost.

Step 7: Double-click DependOnServices and delete everything in the Value data. Then click OK to confirm changes.

Step 8: Restart your computer and there should be no error message when you use Network and Sharing Center.

Solution 3: Repair Nlasvc.dll

A common reason for “dependency service failed to start” is corrupted or damaged nlasvc.dll.

Nlasvc.dll, also known as Network Location Awareness, is a type of Dynamic Link Library (DLL) file. It collects and stores configuration information for the network and notifies programs when this information is modified.

If there is something wrong with nlasvc.dll, any services that depend on it will fail to start, such as Windows and Sharing Center.

To repair nlasvc.dll, you can run SFC (System File Checker).

Run SFC to Restore Nlasvc.dll

Step 1: Open Run window and type cmd in the box. Then press Ctrl + Shift + Enter to run command prompt as administrator.

Step 2: Type sfc /scannow and hit Enter.

Then SFC will scan for nlasvc.dll issues and any other system file problems automatically.

Solution 4: Reset TCP//IP to Default

If “error 1068: the dependency service or group failed to start” still cannot be fixed, you can try to reset TCP/IP to default.

Step 1: Run command prompt as administrator.

Step 2: Type the command “netsh int ip reset” to completely reset TCP/IP configuration and restore TCP/IP to its original state, and then hit Enter.

Step 3: Restart your PC and check whether Network and Sharing Center can run properly.

Fix Error 1068 in Case Two

“Error 1068 — dependency service failed to start firewall” is something you don’t want to experience. It is quite annoying that you cannot turn on your Windows Defender Firewall.

What can you do if you got the error “dependency service failed to start firewall”? Here are several solutions which may be helpful for you.

Solution 1: Change Service Settings

Step 1: Input services.msc in Run window.

Step 2: Right-click your Windows Defender Firewall and select Properties.

Step 3: Choose Start and then set the start-up type to Automatic.

Step 4: Select Apply and click OK.

Step 5: Restart your PC to save changes.

Solution 2: Expand Your Administrators Group

There is another free way to fix the error 1068.

You just need to open command prompt as admin and input the commands below.

• net localgroup administrators localservice /add
• net localgroup administrators networkservice /add

Now you have to restart your Windows and turn on Windows Defender Firewall to check whether “the dependency service or group failed to start” has been solved.

Solution 3: Update Your Network Adapter Driver

Network adapter driver that is out-of-data could also be a cause for “error 1068 — dependency service failed to start firewall”.

To update your Network adapter driver, you can follow these steps.

Step 1: Press Windows key and X at the same time.

Step 2: Select Device Manager from the list.

Step 3: Click the arrow before Network adapters to expand it.

Step 4: Right-click the driver which is currently used, and choose Update driver.

Step 5: Restart your computer to apply the changes.

You can read more details about how to update the Network adapter driver in this article: Top 4 Ways to Fix Slow Internet Speed on Windows 10.

Solution 4: Disable Your Antivirus Temporarily

If you are running a third-party antivirus software, it might be in conflict with your Windows Defender Firewall, and the error 1068 will stops you turning on Windows Defender Firewall.

You can turn your antivirus software off and check if the issue has been solved. If the answer is yes, you need to report the issue to the vendor of your antivirus app, or you can replace the app with another antivirus software.

If the solution cannot fix the problem, you need to try the next one.

Solution 5: Check Your Windows Update

Sometimes, “error 1068: the dependency service or group failed to start” is simply caused by something out-of-date in your Windows. To solve it, you just need a few clicks.

Step 1: Open Settings by pressing Win + I.

Step 2: Click Update & Security to get into Windows Update.

Step 3: In Windows Update, Select check for updates. Then download the available updates and confirm the installation process.

Step 4: Restart your computer and run Windows Defender Firewall to see if error 1068 “dependency service failed to start firewall” has been removed.

Solution for Any Case

If you cannot fix error 1068 with the solutions above, you may need to reinstall your Windows 10.

By reinstalling Windows 10, you can solve the problems due to system file corruption, system settings changes, third-party software and so on. It is kind of annoying, but it is a really effective way to fight with “error 1068: the dependency service or group failed to start”.

In addition, to make sure error 1068 can be completely removed, you’d better perform a clean install.

There are two ways to achieve it:

• Reset This PC (Remove everything)
• Clean Install

You can get instructions on how to use Reset this PC (Remove everything) to fix error 1068 in the following text.

Before you start to reset your PC, you’d better back up your data.

You can use a USB flash drive or an external hard drive to make backup. Pay attention that the backup device needs to be large enough to store all the files and programs in your disk.

Step 1: In the first place, download and install MiniTool Partition Wizard.

Free Download

Step 2: Launch the tool and select Copy Disk Wizard from the action panel.

Step 3: Follow the wizard to finish backup process.

After you back up your files, you can reset your PC to fix error 1068.

Step 1: Click Start and select the Settings icon.

Step 2: Choose Update & Security, and then click Recovery.

Step 3: Click Get started under Reset this PC section.

Step 4:Choose Remove everythingto reset this PC, and then follow the pop-up instructions.

Then Windows 10 will reset your PC and perform a clean install. Once it’s done, you can go and check whether error 1068 has been fixed.

With MiniTool Partition Wizard, I successfully back up data and reset my PC to fix error 1068. I’d like to share it with you!Click to Tweet

Bottom Line

If you are bothered by “error 1068: the dependency service or group failed to start”, don’t be annoyed. You can fix it with solutions above.

If you have better ways to solve this problem, you can contact [email protected]. For any questions, you are free to post it in the comment section below and you will be replied as soon.

Error 1068 FAQ

Работая с компьютером, пользователи иногда сталкиваются с ошибками системы, причины которых могут быть самыми разными. В этой статье подробно рассмотрим, как исправить ошибку 1068 и почему она возникает. Давайте разбираться. Поехали!

«Не удалось запустить службу Удостоверение приложения на Локальный компьютер. Ошибка 1068: Не удалось запустить дочернюю службу» — подобное сообщение появляется при неудачной попытке запустить приложение системы, что становится помехой при работе с компьютером. Чтобы избавиться от этой проблемы, необходимо сделать следующие шаги:

1. Откройте меню «Пуск», выберите «Панель управления».
2. В окне Панели управления нажмите «Система и безопасность».
3. Перейдите к разделу «Администрирование».
4. В появившемся окне выберите «Службы».
5. Перейдя к списку, найдите утилиту «Планировщик заданий». Далее, кликните по ней правой кнопкой мыши и выберите «Свойства».
6. На вкладке «Общие» в пункте «Тип запуска:» укажите «Автоматически».
7. Обязательно нажмите кнопки «Применить» и «Запустить».
8. Найдите в списке приложения: «Журнал событий Windows» и «Удалённый вызов процедур (RPC)». Повторите с ними те же действия, что были описаны выше.
9. Перезагрузите компьютер, чтобы внесённые изменения вступили в силу.

Если несмотря на сделанные вами настройки, ошибка не исчезла, тогда попробуйте следующий способ.

Перейти к нужному списку утилит можно аналогично предыдущему способу или запустите «Диспетчер задач» нажатием комбинации клавиш Ctrl+Alt+Delete, после чего откройте вкладку «Службы». Там понадобится найти и активировать ещё 6 утилит:

С ними необходимо проделать то же самое, что и в первом способе. Если какое-то приложение не удаётся активировать, попробуйте сделать так:

1. Перейдите в меню «Пуск».
2. «Все программы».
3. Выберите папку «Стандартные» и в ней «Командная строка».

Также можно воспользоваться поиском Windows, написав «cmd». Обратите внимание, что запускать командную строку следует с правами администратора. В появившемся окне пропишите команду: net start название утилиты, которую не удаётся включить. Чтобы посмотреть полное имя, перейдите к свойствам утилиты и скопируйте то, что указано в разделе «Имя».

Выполнив все описанные действия, вы сможете избавиться от ошибки 1068, а полноценная работа с ПК будет восстановлена. Пишите в комментариях помогла ли эта статья решить возникшую неисправность системы и задавайте любые интересующие вопросы по рассмотренной теме.

22.05.2016

Просмотров: 9388

Ошибка «Не удалось запустить дочернюю службу или группу» с кодом 1068 означает, что нужная для выполнения определённого действия служба отключена или не может быть запущена по определённым причинам. Возникает такая неполадка при старте ОС, запуске программы, выполнения операций со службами Windows.

Читайте также: Ошибка 678 при подключении к интернету и методы её устранения

Способы исправления ошибки 1068

Чтобы исправить ошибку 1068, когда не удалось запустить дочернюю службу или группу, стоит испробовать несколько способов.

Способ №1

• Жмём «Win+R» и вводим «services.msc».

• Находим в списке службы ту, которая указана в ошибке. К примеру, служба «Сервер».

• Двойным щелчком открываем настройки службы. Если кнопка «Запустить» не активна, стоит в типе запуска выбрать «Вручную» или «Отключить», а затем вновь активировать службу.

• После внесения изменений стоит перезагрузить компьютер.

Способ №2. Если не работает служба Windows Audio

Большинство служб операционной системы Windows связаны с множеством других служб. Это касается и такой службы как Windows Audio. Если она не запускается, стоит проверить статус таких служб:

• Служба «Питание» — статус запуска «Автоматически»;

• Удалённый вызов процедур RPC – статус запуска «Автоматически»;

• Планировщик классов мультимедиа – статус запуска «Автоматически»;

• Средство построения конечных точек Windows Audio – статус запуска «Автоматически»;

После изменения статуса данных служб, самой Windows Audio стоит задать тип запуска «Автоматически» и перезагрузить компьютер.

Способ №3. Ошибка 1068 при сетевом подключении

Если ошибка 1068 при запуске служб возникает при подключении к сети Интернет, стоит проверить работу следующих служб:

• Служба шлюза уровня приложения – статус запуска «Вручную»;

• Протокол PNRP – статус запуска «Вручную»;

• Диспетчер удостоверений сетевых участников – статус запуска «Вручную»;

• Диспетчер подключений Windows – статус запуска «Автоматически»;
• Удалённый вызов процедур RPC – статус запуска «Автоматически»;

• Служба SSTP – статус запуска «Вручную»;

• Служба автонастройки WLAN – статус запуска «Автоматически»;

• Служба сведений о подключённых сетях – статус запуска «Автоматически»;
• Автонастройка WWAN – статус запуска «Вручную»;
• Диспетчер автоматических подключений удалённого доступа – статус запуска «Вручную»;
• Диспетчер подключений удалённого доступа – статус запуска «Вручную»;
• Диспетчер автоматических подключений удалённого доступа – статус запуска «Вручную»;
• Маршрутизация и удалённый доступ;
• Телефония – статус запуска «Вручную»;
• Plug and Play – статус запуска «Вручную».

Также стоит остановить службу «Диспетчера удостоверений сетевых участников», но не менять тип запуска.

Далее нужно перейти в папку «Windows», «serviceProfiles», «LocalService», «AppData», «Roaming», «PeerNetworking» и удалить файл «idstore.sst».

Также стоит отметить, что если данная ошибка возникает и сеть не определяется, её решение может быть следующим:

• Запускаем командную строку с правами Администратора и вводим команду «Net stop p2pimsvc». Далее ставим «Y» и жмём «Enter».

• Далее жмём «Win+R» и вставляем адрес «С:windowsserviceProfilesLocalServiceAppDataRoamingPeerNetworking».

• Удаляем файл «idstore.sst».

Перезагружаем ПК.