Recovery it looks like windows didn t load correctly

If you see an error message It looks like Windows didn’t load correctly in Windows 11/10 while trying to boot or recover your operating system, you can follow these troubleshooting tips to get rid of this issue. This error may appear randomly due to some corrupted system or boot files.

The entire error message says something like this:

It looks like Windows didn’t load correctly

If you’d like to restart and try again, choose “Restart my PC” below. Otherwise, choose “See advanced repair options” for troubleshooting tools and advanced options. If you don’t know which option is right for you, contact someone you trust to help with this.

To fix the It looks like Windows didn’t load correctly error in Windows 11/10, follow these steps:

1. Restart your PC
2. Rebuild BCD
3. Run Automatic Startup Repair
4. Use System Restore point
5. Troubleshoot in Safe Mode

To know more about these solutions in detail, keep reading.

1] Restart your PC

It is the very first thing you need to do when you are getting the aforementioned error. At times, a simple restart fixes countless problems within moments. If a bug is causing this issue in Windows 11 or Windows 10 PC, you may be able to bypass it by restarting your computer.

To restart your computer, you do not need to use the physical restart button. Instead, you can click on the Restart my PC button visible on the error screen.

It will restart your computer immediately and allow you to sign in to your user account. However, if you are still getting the same error message frequently, you need to go through the subsequent solutions.

Read: Windows PC will not boot up or start

2] Rebuild BCD

BCD or Boot Configuration Data is one of the most important things to start or boot your computer. Whether it is the installation or the regular start of the system, you must have the BCD intact in order to get a smooth system. However, if there are some issues with the Boot Configuration Data, you may encounter the aforementioned issue.

That is why it is recommended to rebuild the BCD or Boot Configuration Data. The best thing is that you do not need third-party apps, and it is possible to do that with the help of the Command Prompt. For that, you need to click on the See advanced repair options and choose the Command Prompt option.

Then, enter the following command and hit Enter:

bootrec /rebuildbcd

Read: Windows computer unable to boot to BIOS

3] Run Automatic Startup Repair

Run Automatic Startup Repair and see if that works for you. Clicking on the See advanced repair options button that you see on the error screen may help you get there quickly.

Read: Windows does not boot after compressing System Drive

4] Use System Restore point

If there are some corrupt system files, you must use the System Restore point to restore your computer to an earlier point when there was no issue. However, this solution works only when you created a System Restore point in the past. If so, you can follow this guide to restore your computer using System Restore point.

You may need to boot into Windows with your Windows Installation Media or Recovery Drive and select Repair your computer to enter Troubleshoot > Advanced Startup Options > Command Prompt. You can now use the System Restore option or CMD to run commands.

Read: Windows computer won’t boot after System Restore

4] Troubleshoot in Safe Mode

Can you boot in Safe Mode? If you can, then it makes things easier. If you have recently installed any driver or software, you can boot Windows in Safe mode and troubleshoot. If you had already enabled the F8 key earlier, things are easier as you press F8 while booting, to enter Safe Mode.

At times, a corrupt or incompatible driver can also cause the same issue. In such situations, using the Safe Mode is probably the best and most straightforward solution you have.

How do you fix Recovery It looks like Windows didn’t load correctly?

To fix the It looks like Windows didn’t load correctly error, you need to use the aforementioned solutions. First, you can restart your computer to check if it resolves the problem or not. Then, you can rebuild the BCD, use the System Restore point and troubleshoot the issue in the Safe Mode.

Why does my computer say It looks like Windows didn’t load correctly?

If there are some corrupt system files, your Windows computer may display that message on your screen. The other reason is the corrupt Boot Configuration Data. In that case, you can simply rebuild the BCD on your computer using the bootrec /rebuildbcd command.

Hope this guide helped.

Read: How to boot to Windows Recovery Environment to fix problems?

“Recovery it looks like Windows didn’t load correctly” is a common error message during the PC startup process in Windows 11/10. If you are hit by this issue when booting your Dell or Lenovo, take it easy and MiniTool collects multiple methods to fix it easily.

It Looks Like Windows Didn’t Load Correctly Windows 11/10 Dell/Lenovo

According to users who are using a Dell or Lenovo, the error message “Recovery it looks like Windows didn’t load correctly” appears on your computer when trying to boot or recover the PC. Sometimes your PC accidentally stops working with a blue screen and after a restart, you get the error. Sometimes Windows not loading correctly appears randomly. See an example from a Windows 11 user:

The screen gives you two options – See advanced repair options and Restart my PC. To troubleshoot the issue, click the first one. If you would like to restart and try again, click the second one. The error screen is shown below:

This issue is mainly triggered by damaged Windows files, missing/corrupt BCD, compromised system integrity, etc. It usually happens on Windows 11, 10, and 8. After knowing the reasons to some extent, you can find out how to fix them. Of course, some other solutions are also can help. Now, let’s go to the next part to figure out what you should do.

Fixes for It Looks Like Windows Didn’t Load Correctly Dell/Lenovo

Enter Safe Mode

Safe Mode is a diagnostic mode in Windows and it boots the system with the minimum drivers and services. When it comes to PC troubleshooting, entering Safe Mode is a safe and reliable way. If you are plagued by the issue of Windows not loading correctly, try this way.

Step 1: On the Recovery page, click on See advanced repair options to enter the troubleshooting interface. Alternatively, you can restart your PC several times when seeing the Windows logo to enter the WinRE page.

Step 2: Click Troubleshoot > Advanced options and you can see several options.

Step 3: Click Startup Settings > Restart. Then, you see the following figure and press F4 or F5 to open Safe Mode.

In Safe Mode, you can run a quick diagnostic, for example, uninstall suspicious software or a recently installed driver. To uninstall the driver, go to Device Manager, locate the driver, and right-click on it to choose Uninstall device. To uninstall an app, go to Control Panel > Uninstall a program, right-click on the program and choose Uninstall.

After that, restart your Dell or Lenovo PC to see if the error “it looks like Windows didn’t load correctly” is fixed. If not, continue the troubleshooting.

Turn Off Hybrid Sleep

According to some users, the Hybrid Sleep feature can cause the error of Windows not loading correctly in Windows 10/11. To fix this issue, make sure you disable Hybrid Sleep and see how to do it:

Step 1: In Safe Mode, type Control Panel into the search box and click this app to open it. View items by large icons.

Step 2: Click Power Options > Change plan settings.

Step 3: Click the Change advanced power settings link to open the Advanced settings tab.

Step 4: Expand Sleep > Allow hybrid sleep and then change On to Off.

Step 5: Click Apply > OK.

Run SFC and DISM Scans

Sometimes Windows not loading correctly is triggered by corrupted system files. To get rid of this issue from Windows 10/11, you need to fix the corruption in the Windows system. To do this work, System File Checker (SFC) is helpful. Besides, you can run a DISM scan to repair bad system images. See how to do the scans:

Step 1: In Safe Mode, type cmd to the search box, right-click on Command Prompt, and choose Run as administrator. Alternatively, you can boot the PC to WinRE and go to Troubleshoot > Advanced options > Command Prompt.

Step 2: Type sfc /scannow and press Enter to begin the scan. This scan will take some time and wait patiently.

Step 3: After the SFC scan, run a DISM scan. Just execute these commands one by one, as shown below. Remember to press Enter after each one.

Dism /Online /Cleanup-Image /ScanHealth

Dism /Online /Cleanup-Image /CheckHealth

Dism /Online /Cleanup-Image /RestoreHealth

Run CHKDSK

Sometimes the file system is corrupted or there are bad blocks on the hard drive, as a result, “Recovery it looks like Windows didn’t load correctly” appears on your Windows 11/10 PC. In this case, it is necessary to run the CHKDSK scan.

Step 1: Open Command Prompt (as shown in the above way).

Step 2: Type chkdsk /f /r and press Enter to check for file system errors and hard drive errors, and then fix the found errors and recover the readable information from the bad sectors.

Rebuild BCD

If the BCD files in Windows 11/10 are missing or corrupted, the error “it looks like Windows didn’t load correctly” may appear on the screen. To fix it, try to rebuild BCD. In WinRE, go to Troubleshoot > Advanced options > Command Prompt. After opening Command Prompt, type bootrec /rebuildbcd and press Enter.

Run Startup Repair

Some users recommend running Startup Repair in Windows Recovery Environment. When seeing the error “Recovery it looks like Windows didn’t load correctly”, click See advanced repair options. Then, go to the Advanced options page and click Startup Repair.

Perform System Restore

If you have a habit of backup via System Restore, you can use a restore point to revert Windows 11/10 to an earlier state to fix Windows not loading correctly on Dell, Lenovo, etc. PC.

Step 1: Click System Restore in WinRE.

Step 2: You can use the recommended restore point or choose to use a different restore point.

Step 3: Then, click Finish to start the restoration operation.

If there are no restore points created previously, this way cannot fix your issue.

Reset Your PC

If all of the above ways fail to solve your issue, the last resort to remove “it looks like Windows didn’t load correctly” from Windows 10/11 is PC resetting. This operation can help to reinstall your system.

Windows 11 gives you an option to keep your personal files during the resetting process. But if you save some important files on your desktop, we still recommend you to back up them in advance to avoid unexpected data loss.

Back up Data Before You Do

To back up significant files/folders, you can seek help from a piece of professional and free backup software. MiniTool ShadowMaker is worth trying. This backup program allows you to easily create a system image, back up your important data via image backup or sync, and clone a hard drive for disk upgrade/disk backup.

To back up your files when encountering the error “it looks like Windows didn’t load correctly”, it is a bit difficult but you can use MiniTool ShadowMaker to create a bootable USB drive on a working PC and boot the unbootable PC from that drive. Then, back up data with the Bootable Edition of this backup software.

Free Download

Step 1: Download and install MiniTool ShadowMaker on another PC. Then, launch it to the Tools interface and click Media Builder to create a bootable USB drive.

Step 2: On your problematic PC, go to BIOS, change the boot sequence to let Windows start up from the bootable drive, and then enter the MiniTool recovery environment.

Step 3: Launch MiniTool ShadowMaker to its Backup page, choose files/folders you want to back up, specify a storage path and click the Back up Now button to execute the data backup.

To know more information about the backup steps, refer to our previous post — How to Back up Data without Booting Windows? Easy Ways Are Here.

Reset Your PC

After finishing the file backup, follow the steps below to reset the PC with the error Windows not loading correctly.

Step 1: Boot your PC to WinRE by restarting the machine several times when seeing the Windows logo.

Step 2: Go to Troubleshoot > Reset this PC.

Step 3: Choose the Keep my files option to continue.

Step 4: Select Cloud download or Local reinstall. If you don’t know which one to choose, refer to this post — Cloud Download vs Local Reinstall: Differences on Win 10/11 Reset.

Step 5: Continue the resetting operation by following the on-screen wizards.

“Get the error ‘Recovery it looks like Windows didn’t load correctly’ in Windows 11/10? After trying these ways, it can be easily removed. You can share these solutions with more persons on Twitter.”Click to Tweet

Recover Data from Your Unbootable PC

Sometimes when encountering the situation – it looks like Windows didn’t load correctly Windows 11/10, you choose to recover data before fixing it to avoid additional trouble. Well then, how to do this task? Data recovery is not easy but things can turn simple if you use professional data recovery software – MiniTool Power Data Recovery.

It enables you to recover files from a variety of situations like an unbootable PC, inaccessible hard drive, formatted/lost/deleted/RAW partition, Windows update, etc. In case of Windows not loading correctly, you can also easily get your data from the hard disk.

Just get a paid edition like Personal Ultimate to create a bootable USB drive by clicking the CD icon and then run the machine from that drive. Launch the bootable edition of this program for data recovery. Just go to the Devices tab and click Scan after hovering your mouse over the system disk. Wait some time until the scan finishes. Then, find what you want to recover, choose them and click Save.

Bottom Line

Run your PC but get a blue screen saying “Recovery it looks like Windows didn’t load correctly” in Windows 11/10? To remove this error from your Lenovo or Dell computer, you can try the above solutions collected by us. Just have a shot one by one by following the steps. Of course, if you figure out some other workarounds, welcome to share them with us. Thanks a lot.

It Looks Like Windows Didn’t Load Correctly FAQ

Quick Access to Fix It Looks Like Windows Didn’t Load Correctly

To fix this error — it looks like windows didn’t load correctly, you can choose to restore your PC to an earlier point, only accepting the fact that some downloaded files and applications, plus personal files you saved in the system partition will be missing. The easiest way to fix the error is to watch the video and fix Windows didn’t load correctly in three ways. 

1. 1 — Fix MBR and System File
2. 2 — Fix BCD Error
3. 3 — Uninstall Software or Driver in Safe Mode

If you prefer a step-by-step guide, you can read the fixes below to get more help.

It Looks Like Windows Didn’t Load Correctly

«Automatic Repair 

Windows couldn’t load correctly 

System Restore can try to restore your PC to an earlier point in time when it worked correctly. This repair will not change personal data, but it might remove some apps that were installed recently. You cannot undo this process. 

Restore | Cancel»

This is a Windows Automatic Repair topic called Windows couldn’t load correctly, or perhaps you received the variants, such as Windows couldn’t start correctly, your PC did not start correctly or Windows couldn’t restart correctly. Each specific error has detailed supplementary information behind, telling you what you should do next. Before you are going to fix this error, you must learn about the causes.

What Causes Your PC Did Not Start Correctly

Windows didn’t load correctly error is often caused by these reasons:

1 — BCD is missing or corrupt

BCD became missing or corrupt. This could happen because of disk write errors, power outages, boot sector viruses, or errors made while configuring the BCD manually.

2 — File system integrity compromised

The file system itself may become corrupt or damaged. 

3 — System files are damaged

The system files may also become damaged.

After you have learned about the reasons, you can fix Windows couldn’t load correctly error accordingly. To solve your problem, I have gathered 5 effective solutions to fix Windows couldn’t load correctly in Windows 10/8.1/8/7.

1. Fix 1. Restore Data to Another Drive
2. Fix 2. Boot into Safe Mode
3. Fix 3. Run CHKDSK
4. Fix 4. Rebuild BCD
5. Fix 5. Perform System Restore

Fix 1. Restore Data to Another Drive to Avoid Data Loss

Before you are going to fix Windows couldn’t load correctly error, you must export or restore your data to avoid additional trouble. Since your PC cannot load and boot, you need to create a bootable disk to enter your PC. You can run EaseUS Data Recovery Wizard WinPE Edition. With it, you can restore data to another drive even you can’t boot into Windows. Besides, this data recovery software has many highlights:

• Recover data from dead hard drive
• Restore data from corrupted Windows 10/8/7
• Retrieve photos, videos, documents, and emails

Step 1. Launch EaseUS Data Recovery Wizard in Windows 11/10/8/7 and choose the place where you lost data. Then, click «Scan».

Step 2. After the scan, use the file format filter on the left or upper right corner to find the files you need. Then, you can click the «Preview» button or double-click a file to preview its content.

Step 3. Click the checkbox next to the file and click «Recover» to get back the lost data to a secure place.

Fix 2. Boot into Safe Mode to Fix Windows Not Loading Correctly

Safe Mode is a diagnostic mode of Windows. It is the safest and most promising option when it comes to troubleshooting your pc. Since you cannot boot into Windows when you are faced with Windows didn’t load correctly error, you need a Windows installation CD/DVD for the following methods. If you don’t have the installation disc, follow the guide from Microsoft to create a Windows Installation Media. Then enter Safe Mode:

Step 1. Connect the Windows Installation Media to the computer.

Step 2. Choose to boot from the installation media from the screen.

Step 3. Wait for the files to be loaded.

Step 4. In the Windows Setup window, choose «Next».

Step 5. Again, in the Windows Setup window, choose «Repair your computer» > «Troubleshoot» > «Advanced options» > «Startup Settings».

Step 6. Choose a Safe Mode option (Safe Mode, Safe Mode with Networking, and Safe Mode with Command Prompt) to enter.

You can uninstall suspicious software or drivers in Safe Mode.

Fix 3. Run CHKDSK to Fix Windows 10 Didn’t Load Correctly

Since you can boot correctly, you need to create a Windows 10/8/7 installation disk. Then, follow the steps below:

Step 1. Insert Windows 10/8/7 installation disk or installation USB into PC > boot from the disk or USB.

Step 2. Click «Repair your computer» or hit F8 at the install now screen.

Step 3. Click «Troubleshoot» > «Advanced options» > «Command Prompt».

Step 4. Type chkdsk E: /f /r /x, and press «enter».

«E» means the drive letter of the partition you want to repair.

Fix 4. Rebuild BCD If Windows Couldn’t Load Correctly

If BCD became missing or corrupt, Windows 10/8/7 cannot load correctly. Thus, you can rebuild BCD to fix the error. You also need a Windows installation disc.

Step 1. Insert Windows 10/8/7 installation disk or installation USB into PC > boot from the disk or USB.

Step 2. Click «Repair your computer» or hit F8 at the install now screen.

Step 3. Click «Troubleshoot» > «Advanced options» > «Command Prompt».

Step 4. Type each command line and hit Enter each time:

ren BCD BCD.old

bcdboot C:Windows /1 en-us /s G: /f ALL (Note: c: is the drive where Windows 10/8.1/8 is installed on.)

Step 5. Type exit in Command Prompt when the process completes and then restart your PC.

Fix 5. Perform System Restore If Windows Still Cannot Load

If you have created a Windows restore point before the Windows not loading error occurs, you can perform a system restore to deal with the issue.

Step 1. Choose «Advanced options» on the blue screen and then navigate to «Troubleshoot» > «Advanced Options» > «System Restore». 

Step 2. Choose a restore point to restore your computer to the state.

Step 3. Wait until the restore process finishes and then restart your computer.

If you don’t have a system image, you can install Windows 10/8/7 from USB by yourself.

Conclusion

How to fix if it looks like Windows didn’t load correctly error? If you are wondering then you are in the right place. Here you will find out how to fix this issue with five useful solutions. If you have extra tips, you can contact us and share your solutions.

Windows Couldn’t Load Correctly FAQs

If you still have problems, read on to these related questions. You can get additional help about Windows boot problems.

How do I fix it looks like windows didn’t load correctly?

You can fix Windows 10 didn’t load correctly with these solutions:

• Restore Data to Another Drive
• Boot into Safe Mode
• Run CHKDSK
• Rebuild BCD
• Perform System Restore

What causes your PC did not start correctly?

As mentioned above, the Windows did not start correctly issue can be caused by a third-party program or a recent hardware change on your system, a BCD error, or a file system error.

Why Windows 10 is not working properly?

In some cases, third-party anti-virus and anti-malware software can disrupt certain Windows programs. 

How do I fix Windows startup problems?

You can fix it by uninstalling new software or drivers:

• Insert the Windows bootable drive and boot from it.
• Select your language preferences, and click Next.
• Click Repair your computer.
• Select Troubleshoot > Startup Settings > Restart.
• Press the F4 key to boot Windows into Safe Mode.
• Then, you can uninstall new software or drivers.

How to Fix It Looks Like Windows Didn’t Load Correctly?

If you ever find that Windows didn’t load correctly, we have just the right fix for you. Bear with us to learn all the tips and tricks.

Theo Lucia

Sep 14, 2022 • Filed to: Windows Computer Solutions • Proven solutions

«It happened just after I upgraded my Windows 8.1 to Windows 10 Home. Every time I shut down my PC, while starting, sometimes I get the recovery error message: it looks like Windows didn’t load correctly. Turning off my PC and restarting it solves the issue for the time being. But I need a permanent solution.

Why does it Appear?

It actually boils down to three possible reasons why your Windows couldn’t load correctly. Down below is a list of all the causes and their common symptoms.

1) Blue Screen of Death

As much dramatic it might sound, it’s nothing more than just file system corruption. Having corrupted files within the file system, creates the information unreadable. This is common among file formats such as documents, pictures, and videos. The same goes for Windows system files. Under such circumstances, the computer displays a blue screen error.

2) Compromised File Integration

If you want to fix «it looks like windows didn’t load correctly», understanding the root is very important. To a certain extent, even we are also responsible for this particular cause. The majority of the times the file system is compromised while turning off the PC, even when the machine was in the middle of writing any crucial data.

3) Corrupted or Missing BCD

This is yet another major problem that can raise the issue. This is caused by either the BCD goes missing or just gets corrupted. Sometimes that happens either during a power outage, disk writing error, or any boot sector virus. Trying to manually configure the BCD can also cause the same problem.

How to Fix «it looks like Windows didn’t load correctly» on Your PC?

Solution 1: Boot into Safe Mode

There is no point in arguing that using safe mode is by far the safest and most promising option when it comes to troubleshooting your pc. Safe Mode only allows Windows to load all the essential system parts. So in one way or another, it can actually be beneficial to determine the root of what exactly is not functioning properly. Down below is a detailed step on how you can actually boot your PC into safe mode. Just bear in mind, once you get everything right, you can always load your windows normally.

Booting into Safe Mode

If you want to boot your machine into Safe Mode as Windows didn’t load correctly, this is by far the easiest step of all.

Solution 2: Turning Off Hybrid Sleep

Bear in mind that Hybrid Sleep is not applicable if you have already disabled sleep or hibernation in your Windows Machine. To properly disable hybrid sleep, make sure to follow the steps down below:

Solution 3: Run SFC (System File Checker) on Your Computer

If it looks like windows didn’t load correctly, one of the best resorts is to head over to SFC (System File Checker). This, in turn, enables Windows to scan and restore to the point where everything worked seamlessly. Bear in mind, all the steps down below are very easy to understand and apply.

Running the System File Checker Tool

DISM.exe /Online /Cleanup-image /Restorehealth

It is important to understand that running this command is only possible if your Windows Update client has not been corrupted.

Make sure to replace the C:RepairSourceWindows with the right location of repair.

This command enables Windows to check even the protected file systems. Neither less to say, it is going to change all the corrupted files within the system with their cached copies. You need to have patience. Don’t close the command prompt window until you see that the verification process is completed at 100%. Make sure to understand that the entire process is completely automated, and it doesn’t require anything than manual instructions.

Solution 4: Do a Clean Install of Windows 10

It is imperative to understand that if nothing works out for you, the best resort is to actually revert to a clean Windows 10 installation. You would be surprised to know that mastering the ability to install Windows on your own is a great life-changer. Down below is a step by step guide on how you can actually reinstall if Windows couldn’t load correctly:

Backing Up

It is always one of the best practices to keep a backup of your current Windows. During the installation process, if anything goes wrong, you can always revert to the same. There is also an option to back up to one drive.

Creating a Bootable USB

Installing Windows 10

After the initial process of creating bootable USB is done, Windows 10 installation is very straight forward.

How to Recover Data from the Computer When all Solutions Fail to Fix the Issue?

It can really get tedious at times when you are unable to find any reason, and your Windows stops working out of the blue. As we have stated throughout the article, if you are having any issue with booting, it can actually lead to loss of data. Using Recoverit Data Recovery is a great way to keep your data intact. Neither less to say, it is completely free to download. Down below is a detailed overview of how you can recover your data back:

Change the boot sequence in BIOS to boot from the bootable USB. Check out how to set the computer to boot from a USB drive.

After you have successfully booted the crashed computer, you can recover data with Recoverit.

Conclusion

We covered all about Windows didn’t load correctly issue. Make sure to go through our step by step guide to fix the issue. Further, including, all the steps are properly curated in such a way that you will clearly understand them. But, always note that there is always a potential risk of losing your data. So, if you are looking forward to the safest way to fix the error, we would always recommend you to go with Recoverit Data Recovery, It is completely free to use and the easiest of the lot.

Источник

Tutorial to Fix It Looks Like Windows Didn’t Load Correctly Error

Posted by Bill Farrell July 21, 2022 16:26

«I just upgraded Windows 8.1 to Windows 10 Pro and always shut down my PC correctly, but often when I start my computer, I get the Recovery: It looks like Windows didn’t load correctly screen, I have to turn it off and then on, then my computer boot normally, how to fix this problem, please help.»

We found that many Windows 10 users have encountered this problem. It interrupts the Windows load process and is annoying.

Don’t worry! We are going to share the basic knowledge related to this error and tell you how to fix it quickly in this tutorial.

In this tutorial, we are going to tell you how to get rid of the directory name is invalid error effectively.

Part 1 : Windows couldn’t load correctly error on Windows 8, 8.1, 10

In addition to Windows 10, some Windows 8/8.1 users complained about Windows didn’t load correctly boot error. When people try to turn on their computer, they get the blue screen with a message said:

Windows couldn’t load correctly;

Windows couldn’t start correctly;

Or, Windows couldn’t restart correctly.

Part 2 : Causes of windows didn’t load correctly

The most common causes of Windows didn’t load correctly include:

1. System files are corrupted. If key system files are corrupted due to wrong operations, virus, and more, Windows cannot load normally.

2. File system is damaged. Windows relies on file system to read files and load itself, so you cannot access Windows when file system is damaged.

3. Another common cause of this issue is that BCD is missing. That may be caused by disk write errors, bad sector, malicious programs or configuration errors.

Part 3 : How to fix ‘Windows couldn’t load correctly’ in Windows 10, 8.1, 8 or 7

In this part, we will share multiple solutions on how to fix Windows didn’t load correctly in Windows 10/8.1/8/7.

Solution 1: Check disk status with Windows Security & Maintenance

Windows built-in Maintenance tool allows users to check the disk status and learn if Windows didn’t load correctly error is due to disk damage.

Step 1 : Open your «Control Panel» from the «Start» menu. Go to «System and Security», you can go to «Security and Maintenance».

Step 2 : Click on «Maintenance» to expand it, and then scroll down to «Drive status» area. If there is something wrong on your boot drive, you can repair or fix it to complete troubleshooting.

Solution 2: Fix load problem in Safe Mode

Safe Mode is a diagnostic startup mode in Windows that is used to gain limited access to Windows and troubleshooting. So, it could fix Windows didn’t load correctly error.

Step 1 : Keep pressing «F8» or «Shift + F8» while booting the computer.

Step 2 : On Windows 7, the Advanced Boot Options screen will show up directly. And you can select «Safe Mode» to boot into Safe Mode.

On Windows 10/8/8.1, click «Troubleshoot» > «Advanced Options» > «Startup Settings» and click the «Restart» button. When Startup Settings screen pops up, choose «Safe Mode» to go into it. Now, the load error should not occur.

Solution 3: Fix Windows load issue by chkdsk

Chkdsk is a simple way to repair your disk and help you to get rid of Windows didn’t load correctly error.

Step 1 : First of all, boot into Safe Mode with Command Prompt.

Step 2 : When the command prompt window pops up, input «chkdsk [boot drive letter] /f» and click the «Enter» button.

Step 3 : Wait for the process to complete and reboot your PC into normal mode.

Solution 4: Fix Windows didn’t load correctly through restore

If you have made backups for your PC, simply restoring it could fix Windows didn’t load correctly error caused by wrong configurations.

Step 1 : Make a Windows 10 DVD or bootable USB, insert it to your PC and restart it.

Step 2 : Follow the onscreen instructions until you reach the Windows Installation screen, go to «Repair your computer» > «Troubleshoot» and click «System Restore».

Step 3 : Then complete rest steps and fix Windows load problem.

Solution 5: Rebuild Windows BCD with bootrec

As mentioned before, missing BCD may trigger the Windows didn’t load correctly error. So, follow the steps below to rebuild Windows BCD.

Step 1 : Open the Advanced Boot Options screen by hitting F8 key while PC booting.

Step 2 : Select Command Prompt to open a command prompt window without loading Windows.

Step 3 : Perform the commands below one by one:

Step 4 : Finally, restart your PC to let bootrec rebuild BCD.

Part 4 : How to recover lost files after Windows didn’t load correctly

If you find your files are lost after windows didn’t load correctly error occurs, Apeaksoft Data Recovery could help you to recover them. Its key features include:

1. Recover lost files in one click.

2. File recovery in various situations, including Windows didn’t load.

3. Support a variety of data types and formats.

4. Restore lost files in original status, format and quality.

5. Preview lost files for selectively recovery.

6. Quicker, safer and lightweight.

7. Available to Windows 10/8.1/8/Vista/XP.

In short, the best data recovery software almost equips all features you are looking for.

How to recover lost files after Windows didn’t load correctly

Step 1 : Look for lost files by types

Download and install Data Recovery on your PC. When discover files are lost due to Windows didn’t load correctly, launch the program.

Select what file types to recover under Data Type section and where the files stored originally. Then click on the “Scan” button to start looking for lost files.

Step 2 : Preview before lost files recovery

When result window pops up, select a file type, and then you can look at all readable files on right pane. The «Filter» function at top ribbon is able to find a single file quickly. Moreover, the «Deep Scan» function at upper right corner could recover more files.

Step 3 : Recover lost files in one click

Make sure to select all desired files deleted by Windows didn’t load correctly error by checking corresponding boxes. Then click on the «Recover» button to restore your files to a proper destination.

Conclusion

Now, you should understand what you should do when Windows didn’t load correctly error pops up. This error may be caused by various facts and we identified the most common ones in this post. Moreover, we have told you how to troubleshoot with multiple solutions. If you want to recover lost files when Windows didn’t load correctly, Apeaksoft Data Recovery is the best option. All in all, we wish that our tutorial is helpful to you.

Источник

Учебник, чтобы исправить это Похоже, что Windows неправильно загружена

Размещено от Билл Фаррелл Июль 21, 2022 16: 26

«Я только что обновил Windows 8.1 до Windows 10 Pro и всегда правильно выключаю свой компьютер, но часто, когда я запускаю компьютер, я получаю Recovery: похоже, что Windows неправильно загрузила экран, мне нужно выключить его, а затем затем мой компьютер загрузится нормально, пожалуйста, помогите как решить эту проблему. «

Мы обнаружили, что многие пользователи Windows 10 столкнулись с этой проблемой. Это прерывает процесс загрузки Windows и раздражает.

Не волнуйтесь! В этом уроке мы поделимся основными знаниями, связанными с этой ошибкой, и расскажем, как быстро ее исправить.

В этом уроке мы расскажем вам, как избавиться от недопустимого имени каталога, если ошибка эффективна.

Часть 1 : Windows не может правильно загрузить ошибку в Windows 8, 8.1, 10

Помимо Windows 10, некоторые пользователи Windows 8 / 8.1 жаловались на некорректную загрузку Windows из-за ошибки загрузки. Когда люди пытаются включить свой компьютер, они получить синий экран с сообщением сказал:

Windows не могла правильно загрузиться;

Windows не запускалась правильно;

Или Windows не может правильно перезагрузиться.

Часть 2 : Причины некорректной загрузки windows

Наиболее частые причины, по которым Windows некорректно загружается, включают:

1. Системные файлы повреждены. Если ключевые системные файлы повреждены из-за неправильных операций, вирусов и т. Д., Windows не может нормально загружаться.

2. Файловая система повреждена. Windows использует файловую систему для чтения и загрузки файлов, поэтому вы не можете получить доступ к Windows, когда файловая система повреждена.

Часть 3 : Как исправить ошибку «Windows не загружается правильно» в Windows 10, 8.1, 8 или 7

В этой части мы поделимся несколькими решениями о том, как исправить некорректную загрузку Windows в Windows 10 / 8.1 / 8/7.

Решение 1. Проверьте состояние диска с помощью службы безопасности и обслуживания Windows.

Встроенный в Windows инструмент обслуживания позволяет пользователям проверять состояние диска и узнавать, правильно ли загружается Windows. Ошибка связана с повреждением диска.

Шаг 1 : Откройте «Панель управления» из меню «Пуск». Зайдите в «Система и безопасность», вы можете перейти в «Безопасность и обслуживание».

Шаг 2 : Щелкните «Обслуживание», чтобы развернуть его, а затем прокрутите вниз до области «Состояние накопителя». Если с загрузочным диском что-то не так, вы можете отремонтировать или исправить это, чтобы завершить устранение неполадок.

Решение 2: исправить проблему с нагрузкой в ​​безопасном режиме

Шаг 1 : Удерживайте нажатой «F8» или «Shift + F8» при загрузке компьютера.

Шаг 2 : В Windows 7 сразу открывается экран дополнительных параметров загрузки. И вы можете выбрать «Безопасный режим» для загрузки в безопасном режиме.

В Windows 10/8 / 8.1 нажмите «Устранение неполадок»> «Дополнительные параметры»> «Параметры запуска» и нажмите кнопку «Перезагрузить». Когда появится экран параметров запуска, выберите «Безопасный режим», чтобы войти в него. Теперь ошибки загрузки не должно быть.

Решение 3: исправить проблему с загрузкой Windows с помощью chkdsk

Шаг 1 : Прежде всего, загрузитесь в безопасном режиме с помощью командной строки.

Шаг 2 : Когда появится окно командной строки, введите «chkdsk [буква загрузочного диска] / f» и нажмите кнопку «Ввод».

Шаг 3 : Дождитесь завершения процесса и перезагрузите компьютер в нормальном режиме.

Решение 4. Исправьте Windows, некорректно загружавшуюся при восстановлении

Если у вас есть сделал резервные копии для вашего ПК, простое восстановление может исправить ошибку Windows не загружается правильно, вызванную неправильной конфигурацией.

Шаг 1 : Создайте DVD-диск Windows 10 или загрузочный USB-диск, вставьте его в компьютер и перезапустите.

Шаг 2 : Следуйте инструкциям на экране, пока не дойдете до экрана установки Windows, выберите «Восстановить компьютер»> «Устранение неполадок» и нажмите «Восстановление системы».

Шаг 3 Затем выполните остальные шаги и исправьте проблему загрузки Windows.

Решение 5: пересобрать Windows BCD с помощью bootrec

Как упоминалось ранее, отсутствие BCD может вызвать ошибку «Windows не загружается правильно». Итак, выполните следующие действия, чтобы восстановить Windows BCD.

Шаг 1 : Откройте экран расширенных параметров загрузки, нажав клавишу F8 во время загрузки с ПК.

Шаг 2 : Выберите «Командная строка», чтобы открыть окно командной строки без загрузки Windows.

Шаг 3 : Выполните команды ниже по одной:

Шаг 4 Наконец, перезагрузите компьютер, чтобы bootrec перестроил BCD.

Часть 4 : Как восстановить потерянные файлы после некорректной загрузки Windows

Если вы обнаружите, что ваши файлы потеряны после того, как Windows не загружается правильно, возникает ошибка, Apeaksoft Восстановление данных может помочь вам восстановить их. Его основные функции включают в себя:

1. Восстановить утерянные файлы в один клик.

2. Восстановление файлов в различных ситуациях, в том числе Windows не загружалась.

3. Поддержка различных типов данных и форматов.

4. Восстановление потерянных файлов в исходном состоянии, формате и качестве.

5. Предварительный просмотр потерянных файлов для выборочного восстановления.

6. Быстрее, безопаснее и легче.

7. Доступно для Windows 10 / 8.1 / 8 / Vista / XP.

Короче говоря, лучшее программное обеспечение для восстановления данных почти все функции, которые вы ищете.

Как восстановить потерянные файлы после некорректной загрузки Windows

Шаг 1 : Поиск потерянных файлов по типам

Загрузите и установите Data Recovery на свой компьютер. Если обнаруженные файлы потеряны из-за некорректной загрузки Windows, запустите программу.

Выберите типы файлов для восстановления в разделе «Тип данных» и место хранения файлов. Затем нажмите кнопку «Сканировать», чтобы начать поиск потерянных файлов.

Шаг 2 : Просмотр перед восстановлением потерянных файлов

Когда появится окно результатов, выберите тип файла, а затем вы сможете просмотреть все читаемые файлы на правой панели. Функция «Фильтр» на верхней ленте позволяет быстро найти отдельный файл. Более того, функция «Глубокое сканирование» в правом верхнем углу может восстановить больше файлов.

Шаг 3 : Восстановить потерянные файлы в один клик

Убедитесь, что все нужные файлы, удаленные Windows, не загружаются правильно, установив соответствующие флажки. Затем нажмите кнопку «Восстановить», чтобы восстановить файлы в надлежащее место назначения.

Заключение

Теперь вы должны понимать, что делать, если Windows не загружается правильно, появляется сообщение об ошибке. Эта ошибка может быть вызвана различными фактами, и в этом посте мы определили наиболее распространенные из них. Более того, мы рассказали вам, как устранять неполадки с помощью нескольких решений. Если вы хотите восстановить потерянные файлы, когда Windows не загружалась правильно, Apeaksoft Восстановление данных это лучший вариант. В общем, мы хотим, чтобы наш учебник был полезным для вас.

Источник

How to Fix It Looks Like Windows Didn’t Load Correctly

Quick Access to Fix It Looks Like Windows Didn’t Load Correctly

If you prefer a step-by-step guide, you can read the fixes below to get more help.

It Looks Like Windows Didn’t Load Correctly

Windows couldn’t load correctlyВ

System Restore can try to restore your PC to an earlier point in time when it worked correctly. This repair will not change personal data, but it might remove some apps that were installed recently. You cannot undo this process.В

This is a Windows Automatic Repair topic called Windows couldn’t load correctly, or perhaps you received the variants, such as Windows couldn’t start correctly, your PC did not start correctly or Windows couldn’t restart correctly. Each specific error has detailed supplementary information behind, telling you what you should do next. Before you are going to fix this error, you must learn about the causes.

What Causes Your PC Did Not Start Correctly

Windows didn’t load correctly error is often caused by these reasons:

BCD became missing or corrupt. This could happen because of disk write errors, power outages, boot sector viruses, or errors made while configuring the BCD manually.

The file system itself may become corrupt or damaged.В

The system files may also become damaged.

After you have learned about the reasons, you can fix Windows couldn’t load correctly error accordingly. To solve your problem, I have gathered 5 effective solutions to fix Windows couldn’t load correctly in Windows 10/8.1/8/7.

Fix 1. Restore Data to Another Drive to Avoid Data Loss

Before you are going to fix Windows couldn’t load correctly error, you must export or restore your data to avoid additional trouble. Since your PC cannot load and boot, you need to create a bootable disk to enter your PC. You can run EaseUS Data Recovery Wizard WinPE Edition. With it, you can restore data to another drive even you can’t boot into Windows. Besides, this data recovery software has many highlights:

Step 1. Select a location and start scanning

Launch EaseUS Data Recovery Wizard, hover on the location where you lost data, then click «Scan».

Step 2. Preview and select the files

Wait until the scanning completes. You can use Filter or search bar to find lost files.

Step 3. Recover lost data

Then choose a location to save the recovered data, and click «OK». You should store the data in another place instead of the original one.

Fix 2. Boot into Safe Mode to Fix Windows Not Loading Correctly

Safe Mode is a diagnostic mode of Windows. It is the safest and most promising option when it comes to troubleshooting your pc. Since you cannot boot into Windows when you are faced with Windows didn’t load correctly error, you need a Windows installation CD/DVD for the following methods. If you don’t have the installation disc, follow the guide from Microsoft to create a Windows Installation Media. Then enter Safe Mode:

Step 1. Connect the Windows Installation Media to the computer.

Step 2. Choose to boot from the installation media from the screen.

Step 3. Wait for the files to be loaded.

Step 4. In the Windows Setup window, choose «Next».

Step 5. Again, in the Windows Setup window, choose «Repair your computer» > «Troubleshoot» > «Advanced options» > «Startup Settings».

Step 6. Choose a Safe Mode option (Safe Mode, Safe Mode with Networking, and Safe Mode with Command Prompt) to enter.

You can uninstall suspicious software or drivers in Safe Mode.

Fix 3. Run CHKDSK to Fix Windows 10 Didn’t Load Correctly

Since you can boot correctly, you need to create a Windows 10/8/7 installation disk. Then, follow the steps below:

Step 1. Insert Windows 10/8/7 installation disk or installation USB into PC > boot from the disk or USB.

Step 2. Click «Repair your computer» or hit F8 at the install now screen.

Step 3. Click «Troubleshoot» > «Advanced options» > «Command Prompt».

Step 4. Type chkdsk E: /f /r /x, and press «enter».

«E» means the drive letter of the partition you want to repair.

Fix 4. Rebuild BCD If Windows Couldn’t Load Correctly

If BCD became missing or corrupt, Windows 10/8/7 cannot load correctly. Thus, you can rebuild BCD to fix the error. You also need a Windows installation disc.

Step 1. Insert Windows 10/8/7 installation disk or installation USB into PC > boot from the disk or USB.

Step 2. Click «Repair your computer» or hit F8 at the install now screen.

Step 3. Click «Troubleshoot» > «Advanced options» > «Command Prompt».

Step 4. Type each command line and hit Enter each time:

bcdboot C:Windows /1 en-us /s G: /f ALL (Note: c: is the drive where Windows 10/8.1/8 is installed on.)

Step 5. Type exit in Command Prompt when the process completes and then restart your PC.

Fix 5. Perform System Restore If Windows Still Cannot Load

If you have created a Windows restore point before the Windows not loading error occurs, you can perform a system restore to deal with the issue.

Step 1. Choose «Advanced options» on the blue screen and then navigate to «Troubleshoot» > «Advanced Options» > «System Restore».В

Step 2. Choose a restore point to restore your computer to the state.

Step 3. Wait until the restore process finishes and then restart your computer.

If you don’t have a system image, you can install Windows 10/8/7 from USB by yourself.

Conclusion

How to fix if it looks like Windows didn’t load correctly error? If you are wondering then you are in the right place. Here you will find out how to fix this issue with five useful solutions. If you have extra tips, you can contact us and share your solutions.

Windows Couldn’t Load Correctly FAQs

If you still have problems, read on to these related questions. You can get additional help about Windows boot problems.

How do I fix it looks like windows didn’t load correctly?

You can fix Windows 10 didn’t load correctly with these solutions:

What causes your PC did not start correctly?

As mentioned above, the Windows did not start correctly issue can be caused by a third-party program or a recent hardware change on your system, a BCD error, or a file system error.

Why Windows 10 is not working properly?

In some cases, third-party anti-virus and anti-malware software can disrupt certain Windows programs.В

How do I fix Windows startup problems?

You can fix it by uninstalling new software or drivers:

Источник

Question

Issue: How to fix «It looks like Windows didn’t load correctly» error?

Hello, I need your help. I get the Windows didn’t load correctly error. How can I solve this properly? Do you know what caused this boot issue for me? I updated and this now appears. Maybe the update to Windows 10 caused it?

Solved Answer

“It looks like Windows didn’t load correctly” error often appears while starting the machine and can be triggered by the failed Windows process. There are some problems with the error because it can appear as the Blue Screen of Death^[1] which is a critical error. People get panic when they see this screen, and users^[2] complained about the issue recently.

The corrupted data within the system can create issues with unreadable messages when the machine needs to run processes. Compromised files or corrupted, missing data can lead to various issues, including those blue screens and other critical errors. Sometimes these errors occur a few times before crashing the machine, so when your device reboots properly, it is the best time to fix the root cause for the error.

The particular problem with the “It looks like Windows didn’t load correctly” error can be caused by the affected processes that were needed to properly run the installation of the Windows operating system. This is often caused by the improper installation of the OS. Malware^[3] also can lead to issues with corrupted files and programs.

You can solve issues like this by manually configuring the BCD that is corrupted or missing since this is a possible issue. It is possible to repair affected files and even solve these issues like the “It looks like Windows didn’t load correctly” error by triggering the system scan using tools like ReimageMac Washing Machine X9. Other methods might require your attention and manual intervention.

1. Boot in Safe Mode

2. Run DISM and SFC commands

3. Use System Restore

4. Reset the PC

Repair your Errors automatically

ugetfix.com team is trying to do its best to help users find the best solutions for eliminating their errors. If you don’t want to struggle with manual repair techniques, please use the automatic software. All recommended products have been tested and approved by our professionals. Tools that you can use to fix your error are listed bellow: