Регистрация библиотеки dll windows 7 x64 через командную строку

I have tried to use the following code:

cd c:windowssystem32
regsvr32.exe dllname.ax

But this is not working for me. How can I register a DLL file on Windows 7 with a 64-bit processor?

Type regsvr32 name.dll into the Command Prompt (executed in elevated mode!) and press «Enter.» Note that name.dll should be replaced with the name of the DLL that you want to register. For example, if you want to register the iexplore.dll, type regsvr32 iexplore.dll.

Open the start menu and type cmd into the search box Hold Ctrl + Shift and press Enter

This runs the Command Prompt in Administrator mode.

Now type: regsvr32 MyComobject.dll

Everything here was failing as wrong path. Then I remembered a trick from the old Win95 days. Open the program folder where the .dll resides, open C:/Windows/System32 scroll down to regsvr32 and drag and drop the dll from the program folder onto rgsrver32. Boom,done.

Knowing the error message would be rather valuable. It is meant to provide info, even though it doesn’t make any sense to you it does to us. Being forced to guess, I’d say that the DLL is a 32-bit DirectX filter. In which case this should be the proper course of action:

cd c:windowssyswow64
move ..system32dllname.ax .
regsvr32.exe dllname.ax

This must be run at an elevated command prompt so that UAC cannot stop the registry access that’s required. Ask more questions about this at superuser.com

answered Feb 4, 2011 at 13:51

There is a difference in Windows 7. Logging on as Administrator does not give the same rights as when running a program as Administrator.

Go to Start — All Programs — Accesories.
Right click on the Command window and select «Run as administrator»
Now register the dll normally via : regsrvr32 xxx.dll

answered Jun 11, 2013 at 9:57

You need run the cmd.exe in c:windowssystem32 by administrator

Commands:
For unregistration *.dll files

regsvr32.exe /u C:folderfoldername.dll

For registration *.dll files

regsvr32.exe C:folderfoldername.dll

answered Mar 6, 2015 at 3:50

Part of the confusion regarding regsvr32 is that on 64-bit windows the name and path have not changed, but it now registers 64-bit DLLs. The 32-bit regsvr32 exists in SysWOW64, a name that appears to represent 64-bit applications. However the WOW64 in the name refers to Windows on Windows 64, or more explicity Windows 32-bit on Windows 64-bit. When you think of it this way the name makes sense even though it is confusing in this context.

I cannot find my original source on an MSDN blog but it is referenced in this Wikipedia article http://en.wikipedia.org/wiki/WoW64

answered Nov 11, 2014 at 17:50

Here is how I fixed this issue on a Win7 x64 machine:

1 — error message:

«CoCreateInstance() failed
Plkease check your registry entries
CLSID{F088EA74-2E87-11D3-B1F3-00C0F03C37D3} and make sure you are logged in as an administrator»

2 — fix procedure:

• Start/type cmd/RightMouseClick on cmd.exe and choose to «Run as Administrator»
• typed:
  regsvr32 /s C:Program FilesAutodesk3ds Max Design 2015atl.dll
  regsvr32 /s C:Program FilesAutodesk3ds Max Design 2015MAXComponents.dll
• restart Win 7 and back in business again !

Hope this helps !

1. 

   1

   Understand how this method works. You can use a combination of the «regsvr» command and a DLL file’s name to register the DLL if the DLL file supports the Register Server export command. This will create a path from the Windows registry to the DLL file, making it easier for Windows processes to find and use the DLL file.

   • You’ll most commonly need to use this method to register DLLs which came with third-party programs that are supposed to interface directly with system-level resources (e.g., Command Prompt).

2. 

   2

   Know what the «entry point» error means. If the DLL is already registered, it doesn’t support the Register Server export command, or its code doesn’t allow it to be connected to the Windows registry, you’ll receive an error which says, «The module [DLL name] was loaded but the entry point DllRegisterServer was not found». If you see this error message occur, the DLL cannot be registered.

   • The «entry point» error isn’t so much a problem as it is a confirmation, as seeing this error means that your DLL doesn’t need to be registered.

   Advertisement

3. 

   3

   Find the DLL you want to register. Go to the folder location of the DLL that you want to register. Once you’ve found the DLL file that you want to register, you can proceed.

   • If you installed a program for which you want to register a DLL, for example, you would go to the program’s installation folder (e.g., «C:Program Files[program name]»).

4. 

   4

   Open the DLL’s Properties. Right-click the DLL file, then click Properties in the drop-down menu. A pop-up window will open.

5. 

   5

   Note the DLL’s name. In the text box at the top of the Properties window, you’ll see the DLL’s full name. This is the name you’ll need to enter later.

   • Since most DLLs have difficult-to-remember names, consider leaving up the Properties window when you’re done here; that way, you’ll be able to copy the name later.

6. 

   6

   Copy the DLL’s path. Click and drag your cursor across the string of text to the right of the «Location» heading, then press Ctrl+C to copy the folder path to the DLL.

7. 

   7

   Open Start

   

   . Click the Windows logo in the bottom-left corner of the screen.

8. 

   8

   Search for Command Prompt. Type command prompt into the Start search bar. You should see the Command Prompt icon appear at the top of the window.

9. 

   9

   Open Command Prompt in administrator mode. To do so:

   • Right-click
     

     Command Prompt.

   • Click Run as administrator
   • Click Yes when prompted.

10. 

    10

    Switch to the DLL’s directory. Type in cd and type a space, press Ctrl+V to paste in the path to the DLL file, and press ↵ Enter.

    • For example, if your DLL file is in the «SysWOW64» folder that’s inside the stock «Windows» folder, your command would look like this: cd C:WindowsSysWOW64

11. 

    11

    Enter the «regsvr» command and the DLL’s name. Type in regsvr32 and type a space, then type in your DLL’s name (complete with the «.dll» extension) and press ↵ Enter. If your DLL can be registered, doing this will result in a confirmation message.^[1]
    

    • For example, if the DLL’s name is «usbperf.dll», your command would look like this: regsvr32 usbperf.dll
    • To copy the DLL’s name at this point, re-open the folder with the DLL in it (the Properties window should pop up), then highlight the name in the text box and press Ctrl+C. You can then paste the name into Command Prompt by pressing Ctrl+V.
    • If the DLL is either already registered or unable to be registered, you’ll see the «entry point» error pop up instead of a confirmation message.

12. 

    12

    Try unregistering the DLL and then re-registering it. If entering the «regsvr» command results in an error that isn’t the «entry point» error, you may need to unregister the DLL before you can actually register it:

    • Type in regsvr32 /u name.dll and press ↵ Enter. Make sure to replace «name» with the DLL’s name.
    • Type in regsvr32 name.dll and press ↵ Enter, again remembering to replace «name» with the DLL’s name.

Advertisement

1. 

   1

   Understand how this method works. By creating a list of your computer’s DLL files and running the list as a BAT file, you can automatically register all of your computer’s DLL files. This is optimal if you don’t have a specific DLL that you want to register.

2. 

   2

   Open Start

   

   . Click the Windows logo in the bottom-left corner of the screen.

3. 

   3

   Search for Command Prompt. Type command prompt into the Start search bar. You should see the Command Prompt icon appear at the top of the window.

4. 

   4

   Open Command Prompt in administrator mode. To do so:

   • Right-click
     

     Command Prompt.

   • Click Run as administrator
   • Click Yes when prompted.

5. 

   5

   Switch to the Windows directory. Type in cd c:Windows and press ↵ Enter. This will tell Command Prompt to execute the next command inside of the «Windows» folder.

6. 

   6

   Create a DLL list file. Type dir *.dll /s /b > C:regdll.bat into Command Prompt, then press ↵ Enter. Doing so allows Command Prompt to create a file listing the location and name of every DLL in the Windows directory.

7. 

   7

   Close Command Prompt. Once you see the «c:Windows>» line of text appear below the command you entered, you’re free to exit Command Prompt and proceed.

8. 

   8

   Go to the list file’s location. You can find it from within File Explorer:

   • Open File Explorer
     

     (or press ⊞ Win+E).

   • Click This PC on the left side of the window.
   • Double-click your computer’s OS (C:) hard drive.
   • Scroll down (if necessary) until you see a file named «regdll».

9. 

   9

   Copy the file onto your desktop. In order to save your changes, you’ll need to place a copy of the «regdll» file on your desktop:

   • Click the file once to select it.
   • Press Ctrl+C.
   • Click the desktop.
   • Press Ctrl+V.

10. 

    10

    Open the list file in Notepad. Click the file on your desktop once to select it, then do the following:

    • Right-click the «regdll» file.
    • Click Edit in the drop-down menu.

11. 

    11

    Remove unnecessary DLL locations. While optional, completing this step will cut down significantly on the amount of time it takes to register the DLL files. You can delete any lines of text which have the following locations:^[2]
    

    • C:WindowsWinSXS — The bottom quarter or so of the text document will contain these lines of text.
    • C:WindowsTemp — You’ll find these near the section where the «WinSXS» lines were.
    • C:Windows$patchcache$ — These are harder to find. You can run a search by pressing Ctrl+F, typing in $patchcache$, and clicking Find next.

12. 

    12

    Add the «regsvr» command to each line of text. You can do this by using Notepad’s «Find and Replace» feature:

    • Click Edit.
    • Click Replace… in the drop-down menu.
    • Type c: into the «Find what» text box.
    • Type Regsvr32.exe /s c: into the «Replace with» text box.
    • Click Replace All
    • Exit the window.

13. 

    13

    Save your changes and exit Notepad. Press Ctrl+S to save your changes, then click the X in the top-right corner of the Notepad window to close it. At this point, you’re ready to run the «regdll.bat» file.

14. 

    14

    Run the file. Right-click the «regdll.bat» file, click Run as administrator, and click Yes when prompted to run it in Command Prompt. Doing so will allow Command Prompt to begin registering every available DLL; this process can take a long time to complete, so just make sure your computer is on and plugged in for the duration.

15. 

    15

    Exit Command Prompt. Once the process finishes running, you can close Command Prompt. Your computer’s DLL files should now be registered.

Advertisement

Advertisement

• Unregistering a DLL is helpful if you want to delete it, as every registered DLL is considered «read-only» and thus impossible to delete without unregistering first.

• DLLs are essential for Windows to run properly. While nearly impossible to do, accidentally deleting or changing a system DLL will harm your computer.

Did this summary help you?

1. 

   1

   Understand how this method works. You can use a combination of the «regsvr» command and a DLL file’s name to register the DLL if the DLL file supports the Register Server export command. This will create a path from the Windows registry to the DLL file, making it easier for Windows processes to find and use the DLL file.

   • You’ll most commonly need to use this method to register DLLs which came with third-party programs that are supposed to interface directly with system-level resources (e.g., Command Prompt).

2. 

   2

   Know what the «entry point» error means. If the DLL is already registered, it doesn’t support the Register Server export command, or its code doesn’t allow it to be connected to the Windows registry, you’ll receive an error which says, «The module [DLL name] was loaded but the entry point DllRegisterServer was not found». If you see this error message occur, the DLL cannot be registered.

   • The «entry point» error isn’t so much a problem as it is a confirmation, as seeing this error means that your DLL doesn’t need to be registered.

   Advertisement

3. 

   3

   Find the DLL you want to register. Go to the folder location of the DLL that you want to register. Once you’ve found the DLL file that you want to register, you can proceed.

   • If you installed a program for which you want to register a DLL, for example, you would go to the program’s installation folder (e.g., «C:Program Files[program name]»).

4. 

   4

   Open the DLL’s Properties. Right-click the DLL file, then click Properties in the drop-down menu. A pop-up window will open.

5. 

   5

   Note the DLL’s name. In the text box at the top of the Properties window, you’ll see the DLL’s full name. This is the name you’ll need to enter later.

   • Since most DLLs have difficult-to-remember names, consider leaving up the Properties window when you’re done here; that way, you’ll be able to copy the name later.

6. 

   6

   Copy the DLL’s path. Click and drag your cursor across the string of text to the right of the «Location» heading, then press Ctrl+C to copy the folder path to the DLL.

7. 

   7

   Open Start

   

   . Click the Windows logo in the bottom-left corner of the screen.

8. 

   8

   Search for Command Prompt. Type command prompt into the Start search bar. You should see the Command Prompt icon appear at the top of the window.

9. 

   9

   Open Command Prompt in administrator mode. To do so:

   • Right-click
     

     Command Prompt.

   • Click Run as administrator
   • Click Yes when prompted.

10. 

    10

    Switch to the DLL’s directory. Type in cd and type a space, press Ctrl+V to paste in the path to the DLL file, and press ↵ Enter.

    • For example, if your DLL file is in the «SysWOW64» folder that’s inside the stock «Windows» folder, your command would look like this: cd C:WindowsSysWOW64

11. 

    11

    Enter the «regsvr» command and the DLL’s name. Type in regsvr32 and type a space, then type in your DLL’s name (complete with the «.dll» extension) and press ↵ Enter. If your DLL can be registered, doing this will result in a confirmation message.^[1]
    

    • For example, if the DLL’s name is «usbperf.dll», your command would look like this: regsvr32 usbperf.dll
    • To copy the DLL’s name at this point, re-open the folder with the DLL in it (the Properties window should pop up), then highlight the name in the text box and press Ctrl+C. You can then paste the name into Command Prompt by pressing Ctrl+V.
    • If the DLL is either already registered or unable to be registered, you’ll see the «entry point» error pop up instead of a confirmation message.

12. 

    12

    Try unregistering the DLL and then re-registering it. If entering the «regsvr» command results in an error that isn’t the «entry point» error, you may need to unregister the DLL before you can actually register it:

    • Type in regsvr32 /u name.dll and press ↵ Enter. Make sure to replace «name» with the DLL’s name.
    • Type in regsvr32 name.dll and press ↵ Enter, again remembering to replace «name» with the DLL’s name.

Advertisement

1. 

   1

   Understand how this method works. By creating a list of your computer’s DLL files and running the list as a BAT file, you can automatically register all of your computer’s DLL files. This is optimal if you don’t have a specific DLL that you want to register.

2. 

   2

   Open Start

   

   . Click the Windows logo in the bottom-left corner of the screen.

3. 

   3

   Search for Command Prompt. Type command prompt into the Start search bar. You should see the Command Prompt icon appear at the top of the window.

4. 

   4

   Open Command Prompt in administrator mode. To do so:

   • Right-click
     

     Command Prompt.

   • Click Run as administrator
   • Click Yes when prompted.

5. 

   5

   Switch to the Windows directory. Type in cd c:Windows and press ↵ Enter. This will tell Command Prompt to execute the next command inside of the «Windows» folder.

6. 

   6

   Create a DLL list file. Type dir *.dll /s /b > C:regdll.bat into Command Prompt, then press ↵ Enter. Doing so allows Command Prompt to create a file listing the location and name of every DLL in the Windows directory.

7. 

   7

   Close Command Prompt. Once you see the «c:Windows>» line of text appear below the command you entered, you’re free to exit Command Prompt and proceed.

8. 

   8

   Go to the list file’s location. You can find it from within File Explorer:

   • Open File Explorer
     

     (or press ⊞ Win+E).

   • Click This PC on the left side of the window.
   • Double-click your computer’s OS (C:) hard drive.
   • Scroll down (if necessary) until you see a file named «regdll».

9. 

   9

   Copy the file onto your desktop. In order to save your changes, you’ll need to place a copy of the «regdll» file on your desktop:

   • Click the file once to select it.
   • Press Ctrl+C.
   • Click the desktop.
   • Press Ctrl+V.

10. 

    10

    Open the list file in Notepad. Click the file on your desktop once to select it, then do the following:

    • Right-click the «regdll» file.
    • Click Edit in the drop-down menu.

11. 

    11

    Remove unnecessary DLL locations. While optional, completing this step will cut down significantly on the amount of time it takes to register the DLL files. You can delete any lines of text which have the following locations:^[2]
    

    • C:WindowsWinSXS — The bottom quarter or so of the text document will contain these lines of text.
    • C:WindowsTemp — You’ll find these near the section where the «WinSXS» lines were.
    • C:Windows$patchcache$ — These are harder to find. You can run a search by pressing Ctrl+F, typing in $patchcache$, and clicking Find next.

12. 

    12

    Add the «regsvr» command to each line of text. You can do this by using Notepad’s «Find and Replace» feature:

    • Click Edit.
    • Click Replace… in the drop-down menu.
    • Type c: into the «Find what» text box.
    • Type Regsvr32.exe /s c: into the «Replace with» text box.
    • Click Replace All
    • Exit the window.

13. 

    13

    Save your changes and exit Notepad. Press Ctrl+S to save your changes, then click the X in the top-right corner of the Notepad window to close it. At this point, you’re ready to run the «regdll.bat» file.

14. 

    14

    Run the file. Right-click the «regdll.bat» file, click Run as administrator, and click Yes when prompted to run it in Command Prompt. Doing so will allow Command Prompt to begin registering every available DLL; this process can take a long time to complete, so just make sure your computer is on and plugged in for the duration.

15. 

    15

    Exit Command Prompt. Once the process finishes running, you can close Command Prompt. Your computer’s DLL files should now be registered.

Advertisement

Advertisement

• Unregistering a DLL is helpful if you want to delete it, as every registered DLL is considered «read-only» and thus impossible to delete without unregistering first.

• DLLs are essential for Windows to run properly. While nearly impossible to do, accidentally deleting or changing a system DLL will harm your computer.

Did this summary help you?