TotalMix FX — Mixing/Routing with superior features for Studio and Live Work
Since 2001 TotalMix added unlimited routing and mixing to RME‘s audio interfaces. Its unique capability to create as many independent submixes as output channels available turned it into the most flexible and powerful mixer of its kind.
With supported hardware, TotalMix FX includes a complete effects system, which not only adds flexibility to the recording chain, but also makes latency saddled software solutions obsolete. TotalMix FX (FX on supported cards) can completely replace an external mixer, enabling the creation of multiple latency-free monitor mixes with EQ, Dynamics, Reverb and Delay for any outputs incl. main monitors and headphone mixes for musicians.
TotalMix FX is included as part of the driver (check supported devices). After you’ve downloaded, installed the latest driver and connected your interface, the mixer window will open automatically.
TotalMix Remote — WiFi Remote Control
TotalMix Remote enhances the power of RME interfaces by enabling remote control via iOS, PC or Mac. With a straightforward set up process — simply enter the IP address of the computer you would like to control with TotalRemix Remote and get going — users can quickly adjust any aspect of TotalMix FX on a host system while walking around the studio with their tablet, or from a control room located elsewhere in the facility. The remote software mirrors the exact state of the host system, including the entire display of the interface, the current input and output routing, and all settings including level meters.
DigiCheck — The Secret Weapon of High Resolution Audio Measurements
RME Audio interfaces not only provide you with a professional digital audio interface, but also with a unique software tool: DIGICheck, for metering, testing, measuring and analyzing digital audio streams. 2, 8 or all channel level meters with countless options. Spectral Analyzer, Goniometer and Bit Statistics in professional quality. Even Channel Status readouts are possible. Under Windows DIGICheck also offers a global record function and the direct readout of playback data.
Driver / Firmware Update / Software
Release date
Download
Mac OS Flash Update Tool for MADIface XT/USB/Pro, OctaMic XTC, ADI-2 Pro Series & DAC, Digiface USB/AES/Dante/Ravenna, UFX II
2023-02-03
Update to version MADIface XT: 191/56/42, USB: 25/101, Pro 73. OctaMic XTC: 47/26. ADI-2 Pro: 265/116, ADI-2 DAC: 78/51, ADI-2/4 Pro: 70/29, Digiface USB: 18/35, Dante: 54, Ravenna: 55, AES 47/16/9, UFX II: A 23/14/12, E 111/14/108, 7 201/14/203.
Supported products
ADI-2 DAC FS, ADI-2 Pro AE, ADI-2 Pro FS, ADI-2 Pro FS R Black Edition, ADI-2/4 Pro SE, Digiface AES, Digiface Dante, Digiface Ravenna, Digiface USB, Fireface UFX II, MADIface Pro, MADIface USB, MADIface XT, OctaMic XTC
Mac OS Flash Update Tool for Fireface UFX, 802, UCX, UCX II, UC, Babyface/Pro
2023-02-01
Update to version UFX: 361/163/344/29, 802 A: 19/9/8/11, 802 E: 111/100/100/9, UCX: 49/260/27/14, UCX II: 42/26/21, UC: 127/138, Babyface: 226, Babyface Pro & FS: 203/318.
Supported products
Babyface, Babyface Pro, Babyface Pro FS, Fireface 802, Fireface UC, Fireface UCX, Fireface UCX II, Fireface UFX
Windows Flash Update Tool for Fireface UFX, 802, UCX, UCX II, UC, Babyface Pro
2023-02-01
Update to firmware revision UFX: 360/163/344/29, 802: 19/9/8/11 (A), 109/9/100/100 (E), UCX: 48/260/27/14, UCX II: 42/26/21, UC: 126/138, Babyface: 225, Babyface Pro & FS: 203/318.
Supported products
Babyface, Babyface Pro, Babyface Pro FS, Digiface AES, Fireface 802, Fireface UC, Fireface UCX, Fireface UCX II, Fireface UFX
RME Network Interface for Digiface AVB and Digiface Dante
2023-01-31
RME Network interface for Digiface AVB and Digiface Dante, for Mac OS X 10.14 and up, Intel/Mx compatible. See readme for important notes and usage.
Supported products
Digiface AVB, Digiface Dante
RME AVB Controller for Digiface AVB, macOS Sierra and up
2023-01-30
Supported products
Digiface AVB
Mac OS X Flash Update Tool for HDSPe Series
2023-01-27
Updates HDSPe MADI to firmware version 33/210, HDSPe PCI and HDSPe ExpressCard to 20, RayDAT to 18/207, AES to 11/204, MADIface to 23, AIO to 14, AIO Pro to 23. Now also includes the DriverKit firmware versions.
Supported products
Digiface, HDSP MADI, HDSPe AES, HDSPe AIO, HDSPe AIO Pro, HDSPe MADI, HDSPe RayDat, MADIface, Multiface, RPM
Windows 7 to 11 PnP combo-driver installer for Digiface AVB and Digiface Dante
2023-01-27
Version 0.9805. Package includes network driver and AVB Controller 0.9569.
Supported products
Digiface AVB, Digiface Dante
Windows Flash Update Tool for HDSPe Series
2023-01-27
Updates HDSPe MADI card to firmware version 33/210, HDSPe PCI and HDSPe ExpressCard card to 20, RayDAT to 18/207, AES to 11/204, MADIface to 23, AIO to 14, AIO Pro to 23. Windows XP SP2 / 7 / 8 / 10 / 11. Supports all HDSPe cards/systems! Now also includes DriverKit compatible firmware versions.
Supported products
Digiface, HDSP MADI, HDSPe AES, HDSPe AIO, HDSPe AIO Pro, HDSPe MADI, HDSPe RayDat, MADIface, Multiface, RPM
12Mic Firmware Update
2023-01-24
Firmware 1.6.0. Main update. Carefully read the instructions in the readme.pdf!
AVB Tool Firmware Update
2023-01-24
Firmware 1.6.0. Main update. Carefully read the instructions in the readme.pdf!
Supported products
AVB Tool
Firmware update for M-32 AD Pro
2023-01-24
includes firmware version 2.4.0.
Main update. Carefully read the instructions in the readme.pdf!
Supported products
M-32 AD / M-32 DA Pro
Firmware update for M-32 DA Pro
2023-01-24
includes firmware version 2.4.0.
Main update. Carefully read the instructions in the readme.pdf!
Supported products
M-32 AD / M-32 DA Pro
M-1610 Pro Firmware Update
2023-01-24
Firmware 2.4.0. Main update. Carefully read the instructions in the readme.pdf!
Supported products
M-1610 Pro
DIGICheck 5.96 Win
2023-01-13
Differences to v 4.53: EBU R-128 Meter. Surround Audio Scope with ITU weighting. Simultaneous usage of multiple cards in all functions. Displays fully configurable (e.g. channel selection). Multichannel Level Meter freely configurable. MMCSS for Vista. Many improvements on surface and internal operation. Supports all current interfaces plus DIGI 9636/52. DIGI32 series and DIGI96 series are no longer supported. (10/05/2020).
V596 adds compatibilty for HDSPe MADI FX and XT with DK firmware.
Supported products
ADI-2 DAC FS, ADI-2 Pro FS, ADI-2 Pro FS R Black Edition, ADI-2/4 Pro SE, Babyface, Babyface Pro, Babyface Pro FS, Digiface AVB, Digiface Dante, Digiface Ravenna, Digiface USB, Fireface 802, Fireface UC, Fireface UCX, Fireface UCX II, Fireface UFX, Fireface UFX II, Fireface UFX+, HDSP 9632, HDSP 9652, HDSPe AES, HDSPe AIO, HDSPe AIO Pro, HDSPe MADI, HDSPe MADI FX, HDSPe RayDat, MADIface Pro, MADIface USB, MADIface XT
WDM streaming driver for HDSPe MADI FX, MADIface XT
2023-01-11
WDM, WDM-KS, ASIO. The driver does not support other audio interfaces! Version 2.19. PCIe driver for Windows 8/10/11, 32 and 64 Bit
Supported products
HDSPe MADI FX, MADIface XT
WDM/ASIO driver for HDSP/HDSPe cards/systems
2023-01-11
WDM, WDM-KS and ASIO. Version 4.40. Windows XP SP3 / 8/10/11, not Windows 7. Supports all HDSP and HDSPe cards/systems except HDSPe MADI FX.
Supported products
Digiface, HDSP 9632, HDSP 9652, HDSP AES 32 PCI, HDSP MADI, HDSPe AES, HDSPe AIO, HDSPe AIO Pro, HDSPe MADI, HDSPe RayDat, MADIface, Multiface, RPM
DigiCheck NG macOS
2023-01-09
Universal binary, runs natively on Intel and M1 machines. DigiCheck NG V 0.891 requires macOS 10.13 (High Sierra) or up.
Supported products
ADI-2 DAC FS, ADI-2 Pro AE, ADI-2 Pro FS, ADI-2 Pro FS R Black Edition, ADI-2/4 Pro SE, Babyface, Babyface Pro FS, Digiface AES, Digiface AVB, Digiface Dante, Digiface Ravenna, Digiface USB, Fireface 400, Fireface 800, Fireface 802, Fireface UC, Fireface UCX, Fireface UCX II, Fireface UFX, Fireface UFX II, Fireface UFX+, HDSPe AES, HDSPe AIO, HDSPe AIO Pro, HDSPe MADI, HDSPe MADI FX, HDSPe RayDat, MADIface Pro, MADIface USB, MADIface XT
Windows 7 to 11 PnP driver for MADIface XT / USB / Pro, Fireface UFX+ / UFX II, OctaMic XTC, ADI-2 Pro/AE/FS/DAC, ADI-2/4 Pro, Digiface USB / AES / Dante / Ravenna
2023-01-05
Supported products
ADI-2 DAC FS, ADI-2 Pro AE, ADI-2 Pro FS, ADI-2 Pro FS R Black Edition, ADI-2/4 Pro SE, Digiface Dante, Digiface Ravenna, Digiface USB, Fireface UFX II, Fireface UFX+, MADIface Pro, MADIface USB, MADIface XT, OctaMic XTC
Mac OS X Flash Update Tool HDSPe MADI FX & MADIface XT
2022-12-22
Updates HDSPe MADI FX firmware to v 91/215 and DSP v26/31. MADIface XT firmware to 56 and DSP 31 (USB3 191 DSP 42). Now also includes DriverKit compatible firmware versions.
Supported products
HDSPe MADI FX, MADIface XT
Windows Flash Update Tool HDSPe MADI FX & MADIface XT
2022-12-22
Updates HDSPe MADI FX firmware to v 91/215 and DSP v 26/31. MADIface XT firmware to 56 and DSP 31 (USB3 191 DSP 42). Flash Update Tool for Windows XP/Vista/7/8/10/11. Now also includes DriverKit compatible firmware versions.
Supported products
ADI-8 DS MK III, HDSPe MADI FX, MADIface XT
macOS 11/12 driver for HDSPe MADI FX and MADIface XT
2022-12-21
Version 1.32. For macOS 11 and up. Supports Intel and M1.
Supported products
HDSPe MADI FX, MADIface XT
macOS 11/12 HDSPe Series Driver
2022-12-21
Version 4.22, for macOS 11 and up. Supports Intel and M1.
Supported products
Digiface, HDSPe AES, HDSPe AIO, HDSPe AIO Pro, HDSPe MADI, HDSPe RayDat, MADIface, Multiface, RPM
Windows 7 to 11 PnP driver for Fireface UFX, 802, UCX, UCX II, UC and Babyface/Pro
2022-12-20
Supported products
Babyface, Babyface Pro, Babyface Pro FS, Digiface AES, Fireface 802, Fireface UC, Fireface UCX, Fireface UCX II, Fireface UFX
Mac Firmware Update for Digiface AVB
2022-12-15
Mac Firmware Update Tool for Digiface AVB, v 252.
Supported products
Digiface AVB
Windows Flash Update Tool for MADIface XT/USB/Pro, OctaMic XTC, ADI-2 Pro Series & DAC, Digiface USB, UFX II, UFX+, Digiface Dante, Digiface AVB
2022-12-15
Update to firmware revisions (* latest change)
MADIface XT: USB 191 PCIe 56 DSP 42
MADIface USB: 25 (6), 101 (7)
MADIface Pro: 73
OctaMic XTC: 47/26
ADI-2 Pro series: FPGA 265, DSP 116
ADI-2 DAC series: FPGA 78, DSP 51
ADI-2/4 Pro SE: FPGA 70, DSP 29*
UFX II: USB 23 DSP 14 CC 11 (A), USB 111 DSP 14 CC 108 (E), USB 201 DSP 14 CC 203 (7)
UFX+: USB 54 DSP 46 Thunderbolt 111 (A), USB 70 DSP 46 Thunderbolt 164 (E)
Digiface USB: 18 (X), 23 (G)
Digiface AVB: 252*
Digiface Dante: 54
Digiface Ravenna: 55
Supported products
ADI-2 DAC FS, ADI-2 Pro AE, ADI-2 Pro FS, ADI-2 Pro FS R Black Edition, ADI-2/4 Pro SE, Digiface AVB, Digiface Dante, Digiface Ravenna, Digiface USB, Fireface UFX II, Fireface UFX+, MADIface Pro, MADIface USB, MADIface XT, OctaMic XTC
Windows Fireface UFX+ Thunderbolt Flash Update Tool
2022-12-01
Updates Fireface UFX+ firmware to USB 54, TB 111, DSP 46 (AKM), USB 70, TB 165 (ESS). Thunderbolt Flash Update Tool for Windows 7/8/10/11.
Supported products
Fireface UFX+
TotalMix Remote Mac
2022-11-25
TotalMix Remote V 1.23 — App to remote control TotalMix FX via ethernet and WiFi from other devices with Mac OS 10.12 or up. Universal Binary, supports Intel and Mx. Please note: can not be run on the same computer where the host TotalMix FX is used. This download is not TotalMix FX, which is part of the driver installation.
Supported products
Babyface, Babyface Pro, Babyface Pro FS, Digiface, Digiface AES, Digiface AVB, Digiface Dante, Digiface Ravenna, Digiface USB, Fireface 400, Fireface 800, Fireface 802, Fireface UC, Fireface UCX, Fireface UCX II, Fireface UFX, Fireface UFX II, Fireface UFX+, HDSP 9632, HDSP 9652, HDSP AES 32 PCI, HDSP MADI, HDSPe AES, HDSPe AIO, HDSPe AIO Pro, HDSPe MADI, HDSPe MADI FX, HDSPe RayDat, MADIface, MADIface Pro, MADIface USB, MADIface XT, Multiface, RPM
TotalMix Remote Windows
2022-11-25
TotalMix Remote V 1.23 — Program to remote control TotalMix FX via ethernet and WiFi from other devices with Windows OS (PC, Tablet). Please note: can not be run on the same computer where the host TotalMix FX is used. This download is not TotalMix FX, which is part of the driver installation.
Supported products
Babyface, Babyface Pro, Babyface Pro FS, Digiface, Digiface AES, Digiface AVB, Digiface Dante, Digiface Ravenna, Digiface USB, Fireface 400, Fireface 800, Fireface 802, Fireface UC, Fireface UCX, Fireface UCX II, Fireface UFX, Fireface UFX II, Fireface UFX+, HDSP 9632, HDSP 9652, HDSP AES 32 PCI, HDSP MADI, HDSPe AES, HDSPe AIO, HDSPe AIO Pro, HDSPe MADI, HDSPe MADI FX, HDSPe RayDat, MADIface, MADIface Pro, MADIface USB, MADIface XT, Multiface, RPM
macOS 11/12 USB Series Driver
2022-09-30
USB 2/3 driver for macOS 11 and up. Version 3.28. Supports Intel and M1.
Supported products
Babyface, Babyface Pro, Babyface Pro FS, Digiface AES, Digiface AVB, Digiface Dante, Digiface Ravenna, Digiface USB, Fireface 802, Fireface UC, Fireface UCX, Fireface UCX II, Fireface UFX, Fireface UFX II, Fireface UFX+, MADIface Pro, MADIface USB, MADIface XT
macOS 10.12 up to 10.15 driver for Digiface AVB and Dante
2022-09-29
version 3.222 with added USB-Ethernet (network) driver. Compatible to 10.12 up to 10.15.x. Please also install the RME AVB Controller for Digiface AVB.
Supported products
Digiface AVB, Digiface Dante
macOS 10.12 up to 10.15 driver for Fireface UFX / UFX+ / UFX II, 802, UCX, UCX II, UC, Babyface, Babyface Pro, MADIface XT/USB/Pro
2022-09-29
version 3.222. Compatible to 10.12 up to 10.15. M1 user please download macOS 11 and up USB Series Driver.
Supported products
Babyface, Babyface Pro, Babyface Pro FS, Digiface AES, Digiface AVB, Digiface Dante, Digiface Ravenna, Digiface USB, Fireface 802, Fireface UC, Fireface UCX, Fireface UCX II, Fireface UFX, Fireface UFX II, Fireface UFX+, MADIface Pro, MADIface USB, MADIface XT
WAV File Batch Processor V 1.31 Mac
2022-09-13
Multichannel WAV File Batch Processor — Converter for single and consecutive multichannel WAV files as recorded by the Fireface UFX, UFX II, UFX+ and UCX II Direct USB Recording function
Supported products
Fireface UCX II, Fireface UFX, Fireface UFX II, Fireface UFX+
WAV File Batch Processor V 1.31 Windows
2022-09-13
Multichannel WAV File Batch Processor — Converter for single and consecutive multichannel WAV files as recorded by the Fireface UFX, UFX II, UFX+ and UCX II Direct USB Recording function.
Supported products
Fireface UCX II, Fireface UFX, Fireface UFX II, Fireface UFX+
macOS Flash Update Tool (USB+Thunderbolt)
2022-05-16
Update to firmware version USB 54, TB 110, DSP 46 (AKM), USB 68, TB 164, DSP 46 (ESS).
Supported products
Fireface UFX+
Mac OS X Intel Flash Update Tool for Fireface UFX+ (USB+Thunderbolt)
2022-04-04
Update to firmware version USB 54, TB 110, DSP 46 (AKM) and USB 68, TB 164, DSP 46 (ESS).
Supported products
Fireface UFX+
MIDI Remote AVB for macOS
2022-03-24
Version 1.0.0 with support for the 12Mic, AVB Tool, and OctaMic XTC.
Supported products
12Mic, AVB Tool, OctaMic XTC
MIDI Remote AVB for Windows
2022-03-24
Version 1.0.0 with support for the 12Mic, AVB Tool, and OctaMic XTC.
Supported products
12Mic, AVB Tool, OctaMic XTC
Mac OS X Thunderbolt driver for Fireface UFX +
2022-01-27
Driver for 10.9 up to 10.15. See readme.txt! Does not support other audio interfaces! Version 1.13
Supported products
Fireface UFX+
macOS 11/12 FireWire Series Driver
2021-11-10
Version 3.41, for macOS 11/12 only. Supports Intel and M1.
Supported products
Fireface 400, Fireface 800, Fireface 802, Fireface UCX, Fireface UFX
Mac OS X driver for Fireface UFX / UFX+ / UFX II, 802, UCX, UCX II, UC, Babyface, Babyface/Pro, MADIface XT / USB / Pro, Digiface USB — Legacy Build
2021-10-05
Version 2.23. Compatible to 10.9 up to 10.13. Legacy build, newer drivers are version 3.x ]M1 user please download macOS 11 and up USB Series Driver.
Supported products
Babyface, Babyface Pro, Babyface Pro FS, Digiface AES, Digiface USB, Fireface 802, Fireface UC, Fireface UCX, Fireface UCX II, Fireface UFX, Fireface UFX II, Fireface UFX+, MADIface Pro, MADIface USB, MADIface XT
WDM streaming driver Fireface UFX+ (Thunderbolt)
2021-09-27
Version 1.17. WDM, WDM-KS, ASIO. The driver does not support other audio interfaces! Thunderbolt (PCIe) driver for Windows 8/10/11, 32 and 64 Bit
Supported products
Fireface UFX+
Mac OS X FireWire driver for Fireface 400, 800, 802, UCX, UFX
2021-09-22
Version 3.391. Compatible to OS 10.9 up to 10.15.
Supported products
Fireface 400, Fireface 800, Fireface 802, Fireface UCX, Fireface UFX
Midi Remote Version 1.82 Mac OS X
2021-07-21
MIDI Remote software for ADI-648, ADI-642, ADI-6432, ADI-8 QS, MADI Bridge, Micstasy, OctaMic XTC and M-series, version 1.82. Intel and M1.
Supported products
ADI-642, ADI-6432 /ADI-6432R, ADI-648, ADI-8 QS, M-32 / M-16 AD, M-32 / M-16 DA, Micstasy, OctaMic XTC
WDM/ASIO driver for HDSP/HDSPe cards/systems — Windows 7
2020-12-10
WDM, WDM-KS and ASIO. Version 4.36. Windows XP SP3 / 7/8/10. Supports all HDSP and HDSPe cards/systems except HDSPe MADI FX.
Supported products
Digiface, HDSP 9632, HDSP 9652, HDSP AES 32 PCI, HDSP MADI, HDSPe AES, HDSPe AIO, HDSPe AIO Pro, HDSPe MADI, HDSPe RayDat, MADIface, Multiface, RPM
WDM streaming driver for HDSPe MADI FX, MADIface XT — Windows 7
2020-12-09
WDM, WDM-KS, ASIO. The driver does not support other audio interfaces! Version 2.16. PCIe driver for Windows 7/8/10, 32 and 64 Bit
Supported products
HDSPe MADI FX, MADIface XT
macOS 11/12 Thunderbolt driver for Fireface UFX+
2020-11-27
Version 1.21, for macOS 11 and up. Supports Intel and M1.
Supported products
Fireface UFX+
Mac OS X driver — HDSPe MADI, AES, RayDAT, AIO, MADIface
2020-10-28
Supports 10.9 up to 10.15. See readme.txt for important notes! Version 4.17. Also supports HDSPe PCI Card and ExpressCard with Digiface, Multiface and RPM.
Supported products
Digiface, HDSP MADI, HDSPe AES, HDSPe AIO, HDSPe AIO Pro, HDSPe MADI, HDSPe RayDat, MADIface, Multiface, RPM
Mac OS X driver for HDSPe MADI FX and MADIface XT
2019-11-09
Driver for 10.6 up to 10.15. See readme.txt! Does not support other audio interfaces Version 1.28
Supported products
HDSPe MADI FX, MADIface XT
WDM streaming driver Fireface UFX+ (Thunderbolt) — Windows 7
2019-06-27
Version 1.16. WDM, WDM-KS, ASIO. The driver does not support other audio interfaces! Thunderbolt (PCIe) driver for Windows 7/8/10, 32 and 64 Bit
Supported products
Fireface UFX+
Windows 7 to 11 PnP FireWire driver for Fireface 400, 800, 802, UCX, UFX
2019-02-27
Supported products
Fireface 400, Fireface 800, Fireface 802, Fireface UCX, Fireface UFX
Mac OS X Intel Flash Update Tool ARC USB
2018-10-30
Update to version 7. Adds support for SysEx communication.
Supported products
ARC USB
Mac OS X SL (10.6) Intel driver for HDSPe series (MADI, AES, RayDAT, AIO, MADIface, Multiface, Digiface, RPM)
2017-10-06
Mac OS X SL (10.6) Intel driver for HDSPe series (MADI, AES, RayDAT, AIO, MADIface, Multiface, Digiface, RPM). Supports 10.5 in 32 bit, 10.6 in 32 bit and 64 bit. See readme.txt for important notes!
Supported products
Digiface, HDSPe AES, HDSPe AIO, HDSPe AIO Pro, HDSPe MADI, HDSPe RayDat, MADIface, Multiface, RPM
DIGICheck 0.73 Mac
2017-09-14
EBU R-128 Meter. Surround Audio Scope with ITU weighting. Stereo / Multichannel / Global Level Meter, Spectral Analyser, Vector Audio Scope, Correlation Meter, Bit Statistic & Noise. In this version a display of plaback data is not possible via Core Audio, only via hardware level. Supports all cards of the HDSPe, FireWire and USB series. (09/14/2018).
Supported products
Babyface, Babyface Pro FS, Digiface AVB, Digiface Dante, Digiface Ravenna, Digiface USB, Fireface 400, Fireface 800, Fireface 802, Fireface UC, Fireface UCX, Fireface UCX II, Fireface UFX, Fireface UFX II, Fireface UFX+, HDSPe AES, HDSPe MADI, HDSPe MADI FX, HDSPe RayDat, MADIface Pro, MADIface USB, MADIface XT
Last Windows XP SP2 PnP driver for Fireface Series
2017-07-22
Last Windows XP SP2 PnP driver Version 3.118.
Supported products
Fireface 400, Fireface 800, Fireface 802, Fireface UCX, Fireface UFX
MIDI Remote Version 1.71 Win
2016-12-27
MIDI Remote software for ADI-648, ADI-642, ADI-6432, ADI-8 QS, MADI Bridge, Micstasy, OctaMic XTC and M-series, version 1.71. (12/27/2016)
Supported products
ADI-642, ADI-6432 /ADI-6432R, ADI-648, ADI-8 QS, M-32 / M-16 AD, M-32 / M-16 DA, Micstasy, OctaMic XTC
Last Windows XP SP2 PnP driver for Fireface Series and Babyface/Pro
2016-07-22
Supported products
Babyface, Babyface Pro, Babyface Pro FS, Fireface 802, Fireface UC, Fireface UCX, Fireface UCX II, Fireface UFX
Mac OS Flash Update Tool for Fireface UFX/UCX/802
2016-01-26
Update to firmware 344/27/7. Currently Fireface UFX/UCX/802 are updated via USB only. Please install the USB driver, then use the USB flash update which updates the FireWire firmware as well.
Supported products
Fireface 802, Fireface UCX, Fireface UFX
Windows Flash Update Tool for Fireface UFX/UCX/802
2016-01-26
Update to firmware revision 344/27/7. Currently Fireface UFX/UCX/802 are updated via USB only. Please install the USB driver, then use the USB flash update which updates the FireWire firmware as well.
Supported products
Fireface 802, Fireface UCX, Fireface UFX
Windows Flash Update Tool (02/2009)
2015-10-12
UpdatesPCI and CardBus card to hardware revision 17/55 HDSP 9652 to 108, HDSP 9632 to 155, HDSP MADI to 207 and AES-32 to 234. Flash Update Tool for Windows 2000/XP/Vista/7/8/10.
Attention: Users of HDSP PCI Rev. < 1.8 and the flat HDSP CardBus (15-pin connector) please carefully study the included readme before performing the flash update
Supported products
Digiface, HDSP 9632, HDSP 9652, HDSP AES 32 PCI, HDSP MADI, MADIface, Multiface, RPM
Firmware update for MADI Router
2014-10-12
Includes firmware version 1.33b Main update. Carefully read the instructions in the readme.txt!
Supported products
MADI Router
Mac OS X Intel Flash Update Tool for Fireface 400 and Fireface 800
2012-05-22
Update to firmware revision 1.71 and 2.77. Compatible up to 10.14 macOS Mojave.
Supported products
Fireface 400, Fireface 800
Mac OS X Intel driver for Fireface UFX, UCX, UC and Babyface
2012-04-27
Version 1.68. Last driver to support 10.5.
Supported products
Babyface, Fireface UC, Fireface UCX, Fireface UFX
Mac OS X Intel driver for Fireface 400, 800, UCX, UFX
2012-01-19
Version 3.06. Supports 10.5 in 32 bit, 10.6 in 32/64 bit and 10.7. This driver requires firmware 1.70 (FF 400) and 2.77 (FF 800) or higher.
Supported products
Fireface 400, Fireface 800, Fireface UCX, Fireface UFX
Flash Update Tool for Fireface 400 (Windows, Archive)
2010-11-27
Update to firmware revision 1.71.
Supported products
Fireface 400
Mac OS X SL (10.6) Intel driver for Fireface 400/800
2010-08-30
Version 2.75. Supports 10.5 in 32 bit, 10.6 in 32 bit and 64 bit.
Supported products
Fireface 400, Fireface 800
Flash Update Tool for M-Series (M-32 AD/DA and M-16 AD/DA)
2010-04-02
Includes firmware version 2.1.
New: ADAT Copy mode for M-16 AD, fan control for M-32 AD/DA and internal temperature readout for all models. Supported by MIDI Remote Win/Mac version 1.6 and higher. Carefully read the instructions in the readme.txt!
Supported products
M-32 / M-16 AD, M-32 / M-16 DA
Windows PnP driver for Fireface 400/800
2010-01-18
Version 2.9992. MME support removed! For Windows 7/8 please use driver version 3.x.
Supported products
Fireface 400, Fireface 800
Flash Update Tool for Fireface 800 (Windows, Archive)
2009-11-03
Update to firmware revision 2.77.
Supported products
Fireface 800
Mac OS X Flash Update Tool for Fireface 400
2009-07-09
PPC and Intel Macs (Universal Binary). Update to firmware revision1.69.
Supported products
Fireface 400
Mac OS X Intel driver for 10.4.8 to 10.5.x
2009-03-23
Version 2.67. Supports DIGICheck. See readme.txt for important notes!
Supported products
Digiface, HDSP MADI, HDSPe AES, HDSPe AIO, HDSPe AIO Pro, HDSPe MADI, HDSPe RayDat, MADIface, Multiface, RPM
DMC 842 Remote Version 1.14 Win
2009-02-11
MIDI Remote Control Software for DMC-842
Supported products
DMC 842
DIGICheck 4.53 (Works with all RME cards, except HDSPe RayDAT and AIO)
2008-09-02
Stereo Level Meter, Multichannel Level Meter, Global Level Meter, Spectral Analyser, Vector Audio Scope, Correlation Meter, Totalyser, Bit Statistic & Noise, Global Record. ASIO support, multi-client operation, display of +dBFS levels, display of playback data, K-system, free reference/scale, third colour. New: Hardware Level Meter. RMS Slow and RLB weighting filter. Optional Correlator. Level meters vertical/horizontal. Presets with hotkeys. Support for Fireface 400, newer Fireface 800 drivers, HDSP series WDM driver. Record functionality Global Record. Compatible to HDSPe PCI and HDSPe MADI/MADIface
Supported products
Babyface Pro FS, Digiface USB, Fireface 802, Fireface UC, Fireface UCX, Fireface UFX II, Fireface UFX+, HDSP 9632, HDSP 9652, HDSPe AES, HDSPe MADI, HDSPe MADI FX, MADIface Pro, MADIface USB, MADIface XT
Mac OS X (10.4 or up) PowerPC driver for Fireface 400 / 800
2008-08-22
Supported products
Fireface 400, Fireface 800
Mac OS X Intel driver for Fireface 400 / 800
2008-07-22
Version 2.62a. For 10.4.8 and 10.5.
Supported products
Fireface 400, Fireface 800
Mac OS X Flash Update Tool for Fireface 800
2008-07-16
PPC and Intel Macs (Universal Binary). Update to firmware revision 2.70.
Supported products
Fireface 800
Mac OS X Intel (10.4.8 or up) version of the PPC driver 1.6c for Hammerfall DSP System
2008-06-22
Also supports HDSPe PCI Card and ExpressCard with Digiface, Multiface and RPM. Version 1.73. See readme.txt for important notes!
Supported products
Digiface, HDSP 9632, HDSP 9652, HDSP MADI, MADIface, Multiface, RPM
DIGICheck 2.90 (Works with all RME cards except HDSPe series)
2001-12-04
DIGICheck for Windows 98/ME/NT/2000/XP, Version 2.90 from 4.12.01
Supported products
HDSP 9632, HDSP 9652
 |
|
|
#1 |
|
Mortal
Join Date: Jan 2006 Location: Wickenburg, Arizona Posts: 13,993 |
Totalmix allows you to use F-Keys to control certain functions. In my case, it allows me to fire up the talkback with F8! However, if totalmix is not the app of focus, it ignores those keystrokes. Is there some way to send F8 to totalmix no matter what is in focus? I’m running windows 10 |
|
|
|
|
#2 |
|
Human being with feelings Join Date: Dec 2016 Posts: 55 |
Quote:
Originally Posted by pipelineaudio Totalmix allows you to use F-Keys to control certain functions. In my case, it allows me to fire up the talkback with F8! However, if totalmix is not the app of focus, it ignores those keystrokes. Is there some way to send F8 to totalmix no matter what is in focus? I’m running windows 10 You could write a little script with AutoHotkey or AutoIt — I would prefer the first one. I use AHK for small things and it works great. For that kind of thing, it works very well. |
|
|
|
|
|
#3 |
|
Mortal
Join Date: Jan 2006 Location: Wickenburg, Arizona Posts: 13,993 |
Man I kept thinking Art Evans when I was worried about this, he would have an AHK solution and there it is! But I don’t understand how it would do it exactly. It sure would be nice to save the 200 dollars the RME ARC thing would be just for that one key for me Where can I learn how to use AHK for this? |
|
|
|
|
|
#4 |
|
Human being with feelings
Join Date: May 2009 Posts: 29,027 |
There’s a thread here somewhere by Endorka where they set up Reaper to toggle talkback in TotalMix from Reaper using either MIDI or OSC FYI. It won’t cover non-reaper apps though. I’m 99% sure I could build an arduino with a button that did this over MIDI just as a geeky side discussion which would be global to the machine — then again I’d imagine any MIDI controller button could do this.
__________________ |
|
|
|
|
|
#5 |
|
Human being with feelings
Join Date: May 2009 Posts: 29,027 |
__________________ |
|
|
|
|
|
#6 |
|
Mortal
Join Date: Jan 2006 Location: Wickenburg, Arizona Posts: 13,993 |
Oh man, that is killer! I just want to do a manual one and have the toolbar reflect the current state of talkback, is that possible? |
|
|
|
|
|
#7 |
|
Human being with feelings
Join Date: May 2009 Posts: 29,027 |
Quote:
Originally Posted by pipelineaudio Oh man, that is killer! I just want to do a manual one and have the toolbar reflect the current state of talkback, is that possible? I don’t know, I just help spitball in that thread.
__________________ |
|
|
|
|
|
#8 |
|
Mortal
Join Date: Jan 2006 Location: Wickenburg, Arizona Posts: 13,993 |
I cannot for the life of me, get autohotkey to work when totalmix isn’t in focus SetTitleMatchMode, 2 ; Allows for partial match on program name |
|
|
|
|
|
#9 |
|
Human being with feelings
Join Date: May 2017 Posts: 2,954 |
RME can be controlled by Midi, though I don’t know if there’s a Midi version of whatever the F8 key does. |
|
|
|
|
|
#10 |
|
Mortal
Join Date: Jan 2006 Location: Wickenburg, Arizona Posts: 13,993 |
It�s crazy, but even today, I�m having trouble finding a way of even sending a midi message from the keyboard. Rme made the midi input for this function a midi note, strangely, so that makes it all the more difficult. Otherwise I could use my Midas m32 to control it |
|
|
|
|
|
#11 |
|
Mortal
Join Date: Jan 2006 Location: Wickenburg, Arizona Posts: 13,993 |
Man this is mind blowing how difficult this actually is! it seems purposely limited so they can sell those ARC things, maybe, but ARC would only be for that button for me, because of my setup, the rest of it would be useless I might be able to control it from my M32, or even a note from my Korg Nanokey, but sheesh! |
|
|
|
|
|
#12 |
|
Human being with feelings Join Date: Dec 2016 Posts: 55 |
I have written a little GUI for me to use with TotalMix. My functions and config is as follows: Default Keys: Function Keys (to configure in «ARC & Key Command Settings» in TotalMix): Here is the complete AHK code — it is in German, but it should work for you either way. ; Erzwinge nur eine laufende Instanz ; Skript-Name definieren ; GUI-Gr��e definieren ; GUI definieren und anzeigen ; Button-Aktivierungen auswerten und Shortcuts senden ; Anwendung schlie�en, wenn GUI geschlossen wird ; Verlasse das Programm |
|
|
|
|
|
#13 |
|
Human being with feelings Join Date: Dec 2016 Posts: 55 |
I should add that I am not an expert on AHK. The script above was to try the possibility of connecting AHK and TotalMix — with a GUI in this case, but it does not make 100% sense. It was just a test, but a succesfull one. AHK is a very versatile tool — you can almost do anything you want with it. I read and saw crazy things. You can even send MIDI with AHK but I don�t know how — my colleague did that, afaik. |
|
|
|
|
|
#14 |
|
Mortal
Join Date: Jan 2006 Location: Wickenburg, Arizona Posts: 13,993 |
That is very cool! My biggest issue is that AHK is working fine with it, when Totalmix is the active window, but does not talk to it at all if it is in the background When I get to work I will try your script, sounds awesome! |
|
|
|
|
|
#15 |
|
Human being with feelings Join Date: Dec 2016 Posts: 55 |
I have written the script you could use. ; Erzwinge nur eine laufende Instanz ; «F12» wurde gedr�ckt ; Speichere die ID des aktuell aktiven Fensters in einer Variable ab ; Starte TotalMix FX, wenn das Programm noch nicht l�uft ; Finde die ID des TotalMix FX Fensters und speichere die ID in einer Variable ab ; Aktiviere das TotalMix FX Fenster ; Sende Tastatur-Input an das Fenster ; Aktiviere danach das zuvor ge�ffnete Fenster return |
|
|
|
|
|
#16 |
|
Mortal
Join Date: Jan 2006 Location: Wickenburg, Arizona Posts: 13,993 |
Anyone know why two of my channels here have this orange color on them?
|
|
|
|
|
|
#17 |
|
Human being with feelings Join Date: Dec 2016 Posts: 55 |
Quote:
Originally Posted by pipelineaudio Anyone know why two of my channels here have this orange color on them? That is probably because you activated controlling over Midi. You can see the symbol there also. |
|
|
|
|
|
#18 |
|
Mortal
Join Date: Jan 2006 Location: Wickenburg, Arizona Posts: 13,993 |
Does this show that I have midi control over only those two faders? Is there somewhere i can read about this? Its not in the totalmix manual for my particular interface (Digiface USB) |
|
|
|
|
|
#19 |
|
Human being with feelings Join Date: Dec 2016 Posts: 55 |
Quote:
Originally Posted by pipelineaudio Does this show that I have midi control over only those two faders? Is there somewhere i can read about this? Its not in the totalmix manual for my particular interface (Digiface USB) Check page 42 and 47 in the PDF from the RME page. Probably other channels are hidden (page 42). |
|
|
|
|
|
#20 |
|
Mortal
Join Date: Jan 2006 Location: Wickenburg, Arizona Posts: 13,993 |
I dont see anything on either page about saying which channels will be colored like that. I am running MCU protocol, but I didnt say I wanted to control the first two faders or anything, still not exactly sure what’s going on |
|
|
|
|
|
#21 |
|
Mortal
Join Date: Jan 2006 Location: Wickenburg, Arizona Posts: 13,993 |
Quote:
Originally Posted by BlackScreen I have written the script you could use. ; Erzwinge nur eine laufende Instanz ; «F12» wurde gedr�ckt ; Speichere die ID des aktuell aktiven Fensters in einer Variable ab ; Starte TotalMix FX, wenn das Programm noch nicht l�uft ; Finde die ID des TotalMix FX Fensters und speichere die ID in einer Variable ab ; Aktiviere das TotalMix FX Fenster ; Sende Tastatur-Input an das Fenster ; Aktiviere danach das zuvor ge�ffnete Fenster return This works perfect! Now I just gotta figure a way to sync a reaper icon to it |
|
|
|
|
|
#22 |
|
Human being with feelings Join Date: Dec 2016 Posts: 55 |
Quote:
Originally Posted by pipelineaudio This works perfect! Now I just gotta figure a way to sync a reaper icon to it I think you have to compile the script to an EXE for that. At least I know that works. |
|
|
|
|
|
#23 |
|
Mortal
Join Date: Jan 2006 Location: Wickenburg, Arizona Posts: 13,993 |
According to the Totalmix FX manual, I should be able to control certain Totalmix FX functions with MIDI notes. I have tried several midi interfaces and controllers with no luck. Controlling it thru MCU mode does work however. Anyone able to get MIDI notes to work? «22.5 MIDI Control |
|
|
|
|
|
#24 |
|
Human being with feelings Join Date: Nov 2018 Posts: 43 |
The coloring on the channels show which channels are being displayed/controlled by your controller; in my case I use a Mackie control for totalmix,hence 8 channels are colored. the sends button selects the first 8 sends ; bank buttons moves the selection. The i/o button selects, well, the inputs or outputs. There is a box in the settings Midi section to allow or disable control in the background. |
|
|
|
|
|
#25 |
|
Mortal
Join Date: Jan 2006 Location: Wickenburg, Arizona Posts: 13,993 |
Quote:
Originally Posted by dmartinyesyes The coloring on the channels show which channels are being displayed/controlled by your controller; in my case I use a Mackie control for totalmix,hence 8 channels are colored. the sends button selects the first 8 sends ; bank buttons moves the selection. The i/o button selects, well, the inputs or outputs. There is a box in the settings Midi section to allow or disable control in the background. Thank you! |
|
|
|
|
|
#26 |
|
Human being with feelings Join Date: Dec 2016 Posts: 55 |
Quote:
Originally Posted by pipelineaudio According to the Totalmix FX manual, I should be able to control certain Totalmix FX functions with MIDI notes. Well I did get that to work with a X-Touch Mini from Behringer — but not without a little help from Bome MIDI Translator Pro.
Without Bome, I did not get it to work properly. With Bome I get 16 channels with fader movement from the potis (including reset to 0 dB when pressing it), solo and mute buttons. Nice and compact if one needs it. |
|
|
|
|
|
#27 |
|
Human being with feelings
Join Date: Mar 2012 Posts: 308 |
I’m jumping into this thread as it’s pretty relevant to what I’m trying to tackle right now: I want a script where Reaper will send a midi message to TotalMix (via my Fireface 800 as the midi device) to change the current snapshot from 1 to 2. I am also using the ARC USB as a remote controller, and I am hoping that sending this midi message would not disable it. Either way, here is a script I am currently using to change patches on my Axe FX: /* /* msg_type = 12; // Program Change main (); I am wondering if this can be modified to control snapshot changes on TotalMix? Snapshot 1: 36 / 54 / #F 3 Can anyone help push me along? *Edit: So I’ve made some progress. I’ve managed to control TotalMix from my midi keyboard via Reaper. So I can confirm that I can send midi note on/off commands to switch snapshots on TotalMix. Now I am looking to incorporate this into an .eel script, like the one I pasted above. It would appear I have to make the following changes: msg type = 9; // Note On (do I also need to include 8, note off?) And this is where I get confused: function main () main (); My Fireface 800 has ID 3 in my midi devices preferences. So since according to the reascript API 16 = midi device 0, 17 = midi device 1, etc., the first ‘x’ should be 19 (16 + 3). But I am unsure how else to fill in the command?
Last edited by Miscreant; 08-19-2022 at 02:17 PM.
|
|
|
|
|
|
#28 |
|
Human being with feelings Join Date: Aug 2009 Posts: 369 |
I’m curious… what is the use case where you need this to be in a script ? for instance if you want to change the TM snapshot during Reaper playback you could just add a midi track in your project and put the note at the timeline location ? otherwise if you wanted to manually trigger the change, you could do that with a key shortcut or your midi controller etc ? |
|
|
|
|
|
#29 |
|
Human being with feelings
Join Date: Mar 2012 Posts: 308 |
Hey—thanks for chiming in. Good q’s. The reason is that I want to use the script as an action in a larger, custom action that runs whenever I use a foot pedal to begin recording on a track. This foot pedal triggers a few different things, but I’d like it to trigger via midi to my FF800 also a change in snapshots in TotalMix, which are just submixes that I use to toggle between speakers A and B. Basically, when I’m recording I like to hear my speakers B, as they’re big FRFRs, and when I’m mixing/monitoring/auditioning I like to use speakers A, which are proper mixing speakers. If I can get this script working, I can then stick it in as part of this custom action, and I’m no longer forgetting to change speakers in TotalMix whenever I switch from playing to listening. They would automatically switch whenever I start/stop recording. |
|
|
|
|
|
#30 |
|
Human being with feelings Join Date: Aug 2009 Posts: 369 |
ahhh gotcha.. sadly I cant help with the script… in case you need an alternative option though you may be able to use OSC with a small external exe.. https://forum.cockos.com/showthread.php?t=268374 just substitute the X Air address in that thread with TM snapshots address.. that’s not as elegant as using midi like you are looking to do, but maybe useful as plan B if needed.. |
|
|
|
|
|
#31 |
|
Human being with feelings
Join Date: Mar 2012 Posts: 308 |
^Thanks for that. Here’s my most recent version, which still isn’t working but I think I’ve figured a few things out. Also, when I run this script I do see my MIDI indicator blink on the Fireface. So it’s getting the message, but still not changing the snapshot like I want: /* /* msg_type = 9; // Note On main (); msg_type = 8; // Note Off main (); |
|
|
|
|
|
#32 |
|
Mortal
Join Date: Jan 2006 Location: Wickenburg, Arizona Posts: 13,993 |
Awesome work everyone! |
|
|
|
|
|
#33 |
|
Human being with feelings
Join Date: Mar 2012 Posts: 308 |
Quote:
Originally Posted by Miscreant ^Thanks for that. Here’s my most recent version, which still isn’t working but I think I’ve figured a few things out. Also, when I run this script I do see my MIDI indicator blink on the Fireface. So it’s getting the message, but still not changing the snapshot like I want: /* /* msg_type = 9; // Note On main (); msg_type = 8; // Note Off main (); I can confirm this script works, BUT: I had to send it via USB from my DAW to my AxeFx, which then relayed the midi message via its midi thru to the FF800. Without this the FF800 wasn’t getting any midi at all… So now whenever I start recording Reaper automatically switches TotalMix to output audio from my wedge FRFR speakers, and right when I hit stop it switches right back to my monitoring speakers so I can listen back carefully. Beauty! |
|
|
|
|
|
#34 |
|
Human being with feelings Join Date: Aug 2009 Posts: 369 |
do you have a midi loopback driver installed (such as loopBe) to enable the communication between Reaper and TM ? for a direct connection between software you would need something like this otherwise you need to manually loop a midi cable out/in on the interface or send midi through another device like your FX unit.. the RME midi driver in Reaper only refers to the midi port on the interface it doesn’t send midi to TM.. |
|
|
|
|
|
#35 |
|
Human being with feelings
Join Date: Mar 2012 Posts: 308 |
Quote:
Originally Posted by EcBaPr do you have a midi loopback driver installed (such as loopBe) to enable the communication between Reaper and TM ? for a direct connection between software you would need something like this otherwise you need to manually loop a midi cable out/in on the interface or send midi through another device like your FX unit.. the RME midi driver in Reaper only refers to the midi port on the interface it doesn’t send midi to TM.. Interesting you bring this up. I just learned the other day about loopback functionality on my FF800 via TotalMix. I don’t believe I need a separate driver for this. It is native to the latest version of TotalMix. That being said, I don’t yet fully understand the feature. So I need to do some more digging. But if what you say is right, it explains why I needed to run a midi cable from the midi thru/out of my AxeFx to the midi in of the FF800: TotalMix was not receiving the midi message I was trying to send to the FF800. This doesn’t quite explain why sending it via the Axe fixes anything. But, alas, this is exactly what happened. I don’t fully understand why yet. |
|
|
|
|
|
#36 |
|
Human being with feelings
Join Date: Mar 2012 Posts: 308 |
So things aren’t quite all setup after all… It turns out whenever I hit play on the transport, a slew of midi data is sent out, I believe from Reaper to my Axe, and then from my Axe to the FF800. Here’s an image: https://drive.google.com/file/d/1gYH…ew?usp=sharing Since the snapshots on in TotalMix are controlled via midi on/off messages, the result is that whenever I hit ‘play’ the levels in TotalMix ‘jitter’ a bit. Does anyone know why Reaper is sending out all this midi information each time I hit play? And is there a way to stop it, without stopping the midi messages I’ve programmed into the .eel script running in my custom action? Edit 1: I had to turn off the auto-reset options in Prefs under Midi Devices.
Last edited by Miscreant; 08-22-2022 at 07:51 AM.
|
|
|
|
|
|
#37 |
|
Human being with feelings Join Date: Aug 2009 Posts: 369 |
the loopback in totalmix is an audio loopback not midi.. if you have audio channels routed from top and middle row to one of the outputs at the bottom, you can select loopback on that output and that mix will then be seen in software to record.. it doesn’t do anything with midi though. I don’t have an Axe but its midi driver probably means you are sending commands to the Axe itself ?? which passes to the thru/output also ? RME midi driver is different and only sends midi to the DIN port on the back of the interface nothing goes to totalmix from their driver you see in Reaper.. hence you need midi loopback software or you have to manually run a cable from the out->in on the interface and then select it for the midi input in totalmix.. if you initially had the RME midi port selected in the script, then it was likely reaching the midi output port on your interface where you would still see midi lights blink but not going to Totalmix..
Last edited by EcBaPr; 08-22-2022 at 05:14 PM.
|
|
|
|
|
|
#38 |
|
Human being with feelings
Join Date: Mar 2012 Posts: 308 |
Yep, I’m sending commands to the Axe, which then relays it to the FF800. If the loopback function is audio only, then I don’t see how it would help here? |
|
|
|
|
|
#39 |
|
Human being with feelings Join Date: Aug 2009 Posts: 369 |
there are two «loopbacks».. the loopback you mentioned.. Quote:
Originally Posted by Miscreant I just learned the other day about loopback functionality on my FF800 via TotalMix. I don’t believe I need a separate driver for this. It is native to the latest version of TotalMix. this is an audio only loopback and its a different thing to a midi loopback.. the midi loopback using «loopBe» is another piece of software you can install which creates a «virtual midi cable» between Reaper and Totalmix (or any two midi programs).. RME don’t offer any midi loopback in their drivers.. anyway if you have it working, no problem.. |
|
|
|
|
|
#40 |
|
Human being with feelings
Join Date: Mar 2012 Posts: 308 |
Quote:
Originally Posted by EcBaPr there are two «loopbacks».. the loopback you mentioned.. this is an audio only loopback and its a different thing to a midi loopback.. the midi loopback using «loopBe» is another piece of software you can install which creates a «virtual midi cable» between Reaper and Totalmix (or any two midi programs).. RME don’t offer any midi loopback in their drivers.. anyway if you have it working, no problem.. Ahh, I see. Now I get what you’re saying. Interesting point. Some time I’ll look into this. |
|
|
|
|
|
Forum Jump |
All times are GMT -7. The time now is 12:40 PM.
Powered by vBulletin® Version 3.8.11
Copyright ©2000 — 2023, vBulletin Solutions Inc.