Rzudd sys синий экран windows 10

Ошибка PAGE FAULT IN NONPAGED AREA в Windows 10

Fix: PAGE FAULT IN NONPAGED AREA (rzudd.sys) Blue Screen Error Windows 10

Today, we will discuss all the possible workarounds to resolve PAGE FAULT IN NONPAGED AREA, another Blue Screen of Death error in Windows 10. The Stop code indicates a failure in rzudd.sys. Basically, “rzudd.sys” is a Razer Rzudd Engine driver, a part of Razer Synapse software which crashed down and leads to the BSOD screen. Experts are with a view that this issue is triggered when Driver Verifier is enabled.

However, as per some other techies, PAGE FAULT IN NONPAGED AREA (rzudd.sys) may also occur because of memory corruption. So, if you get the same rzudd.sys Blue Screen issue, then you should perform certain troubleshooting methods. The Razer Support team suggests to disable and enable Driver Verifier to get rid of the problem. Furthermore, you should also check the memory as well as disk, remove third-party antivirus, or update drivers to fix the issue.

PAGE FAULT IN NONPAGED AREA (rzudd.sys) –

PAGE FAULT IN NONPAGED AREA (rzudd.sys) Blue Screen Error Windows 10 Solutions

Here is how to fix PAGE FAULT IN NONPAGED AREA (rzudd.sys) Blue Screen Error Windows 10.

When BSOD error appears on your PC, you cannot access the login screen. It becomes difficult to perform any of the fixes, therefore, you must Boot into Safe Mode then try the solutions.

To begin with, you need to disconnect all external devices. Then insert “Windows 10 installation media”. You can use DVD or USB into the respective port of the device and restart the system.

Simultaneously make a hit on any of the function keys such as Esc, Delete, F2, F8, F10, F12 or Backspace repeatedly. The function key completely depends upon your PC’s model. Continuously pressing it will open your system into boot mode.

Henceforth select a preferred language and hit Next.

Click on Repair your computer option which appears on the bottom left of the screen.

Now, navigate to Troubleshoot => Advanced Options => Startup Settings.

Finally, select Enable Safe Mode from the list of options that show up on the following screen. Click Restart and wait until the PC enters the Safe Mode.

Perform a Disk and Memory Check

The BSOD error is caused due to the fault in the disk drive or associated components such as RAM or NTFS volume. So you should check the system files to avert the PAGE FAULT IN NONPAGED AREA issue.

Here are the steps-

Step-1: Go to the Start Menu and type cmd. Here right click on Command Prompt and select Run as administrator option.

Step-2: Click Yes to give authentication to the UAC prompt.

Step-3: Now on the elevated Command Prompt copy-paste or type the following syntax and hit Enter to execute it.

The structure of this code is like chkdsk [Drive:] [parameters] where f denotes to avoid the issue found on the volume. In a similar way, r catch the fault from poor sections on the volume and retrieve the readable data.

Step 4: Since your PC is busy to complete other processes, press Y key to schedule this task after rebooting.

Step-5: Press Win logo & R hotkeys altogether and write mdsched.exe in the Run dialog box and hit Enter.

Step-6: Now, make a click on the first option Restart now and check for problems (recommended) to instantly restart Windows 10 PC.

Step-7: This process will take approx. 15 minutes to complete the task, therefore, wait patiently.

Once you finish the process, hopefully, the issue rzudd.sys will disappear from the system. If you still face it, follow the next workaround.

Uninstall and Reinstall Driver Verifier

The Driver Verifier is the Microsoft’s app generated for Windows user to distinguish between original and third party driver installed on your PC. It also helps to recognize the faulty and missing hardware driver inside the system. Razer Stargazer’s camera driver crashes when Driver Verifier is enabled which eventually leads to PAGE FAULT IN NONPAGED AREA (rzudd.sys) Blue Screen Error Windows 10.

As per the several users’ report, you can uninstall and re-install this software to avert the issue in your computer. Here is the process to follow –

Disable Driver verifier

As you are unable to access the desktop, you need to insert Windows 10 installation media. Start your PC after inserting the media.

Choose the Language preferences on the subsequent screen and click Next. On the Setup dialog, click Repair your computer.

Click on Troubleshoot and henceforth perform a hit on Advanced options.

Thereafter in the “Advanced Options”, click on the Startup Settings.

Now, move the cursor down and make a click on Restart button.

Finally, select “Disable driver signature enforcement” from the list of options.

Enable Driver verifier

Press “Windows and R” hotkeys and type cmd then hit Enter to access the Command Prompt.

On prompt area type verifier then hit Enter. Keep patience until the Operation is completed successfully message appears.

Once the verifier code is completed, open this app and activate the checkbox Create custom settings (for code developers).

Move down and click on Next button.

On the following screen, check the below-given options.

Then again make a click on Next.

Moving on, choose the option Select driver names from the list and hit Next.

Go ahead and tap the Provider header. It will sort the driver providers name alphabetically. Here select all the drivers which don’t have the provider name as Microsoft Corporation.

Finally, reboot the system and you will notice that the Driver Verifier is enabled on your computer. Now check the issue PAGE FAULT IN NONPAGED AREA has been resolved on your PC.

Undo Recent Changes

The apps or device which you have recently installed on your PC might be one of the reasons for the occurrence of PAGE FAULT IN NONPAGED AREA error. Thus you need to identify the changes which have been performed. If it is an installation of a software, then uninstall it right away and check for the issue. Or if any hardware modification is done, then try to revert back the changes. If this fix does not help you to resolve the rzudd.sys then follow below methods.

Remove antivirus program if installed

Antivirus software is a security program used to protect your PC from unwanted threats. However, the anti-malware app prevents the working of some system files which could be the culprit behind BSOD rzudd.sys issue. Hence uninstall any third-party antivirus program. Here is how to proceed:

Press Windows and I keys jointly to open Windows Settings and click the Apps category.

Under Apps and features menu go to the right pane and scroll down the cursor to locate third-party software.

When you find the app, click on the same and hit the Uninstall button.

Finally, close the windows and try to login on your PC in normal mode.

Note: You can use Windows Security (the built app) instead of other third-party programs for a safe and secure purpose.

Disable Automatic Paging File Size Management

Paging file size is a memory management scheme to adjust the memory size when you have logged into your computer. The less extent might cause the rzudd.sys error with BSOD. So adjust the paging management by following these steps.

Go to the Taskbar and click on the File Explorer icon. If you are unable to locate the icon then press Windows and E keys jointly to open the same.

In the left pane, perform a right click on This PC option and select Properties from the context menu.

Succeeding this, hit Advanced system settings in the new window.

While proceeding ahead, in the Advanced tab, under the “Performance” section click on the Settings button.

This will prompt up Performance Options dialog. Switch to the Advanced tab and click on Change.

Here you have to make sure the first option “Automatically manage paging file size for all drives” is unchecked. Click OK to implement the modifications on the Paging File.

Lastly, Reboot the device and check whether the issue PAGE FAULT IN NONPAGED AREA is rectified or continue to persist.

Update device drivers

The faulty and missing device drivers in the computer also lead to several types of issues which also includes PAGE FAULT IN NONPAGED AREA error. Thus identify the corrupt drivers and try to update them according to your system model.

Do a right-click on Start icon and click “Device Manager” from the Win+X Menu.

Here, expand each category and see which device displays a yellow exclamation mark. Right-click on that specific device and choose “Update driver“.

On the following wizard, choose the option namely “Search automatically for updated driver software” and go through the guidelines to finish the update.

Источник

Fix FaceIt.sys, rzudd.sys or AcmeVideo.sys BSOD error on Windows 10

Blue Screen of Death errors are fairly common on Windows 10. Quite a significant number of these BSOD errors are caused by corrupted, outdated, incompatible drivers. In this post, we focus on three of such drivers viz; FaceIt.sys, rzudd.sys and AcmeVideo.sys. This post will offer the most suitable solutions to BSOD errors that you might encounter on your Windows 10 device, triggered by these aforementioned drivers.

Before we get right to it. let’s ID these drivers in relation to which apps and processes they belong to.

FaceIt.sys

The FaceIt.sys is an anti-cheat driver for games digitally signed by FACE IT LIMITED.

Rzudd.sys

This file most often belongs to the product Razer Rzudd Engine. The driver is developed by company Razer USA Ltd.

AcmeVideo.sys

This file is a video driver for hardware by ACME Video Solutions.

FaceIt.sys, rzudd.sys or AcmeVideo.sys BSOD error

Let’s take a look at the description of the process involved concerning each of the listed solutions.

If you can log in normally, good; else you will have to boot into Safe Mode, enter the Advanced Startup options screen, or use the Installation Media to boot to be able to carry out these instructions.

1] Run Driver Verifier

It is estimated that about three-quarters of blue screens are caused by faulty drivers. Driver Verifier is a tool that runs in real-time to examine the behavior of drivers. For example, Driver Verifier checks the use of memory resources, such as memory pools. If it sees errors in the execution of driver code, it proactively creates an exception to allow that part of the driver code to be further scrutinized. The Driver Verifier Manager is built into Windows 10. You can configure which drivers you would like to verify. The code that verifies drivers adds overhead as it runs, so try and verify the smallest number of drivers as possible.

2] Update driver

Faulty or outdated drivers may trigger this BSODerror as well.

In this case, you can either update your driver manually via the Device Manager, or you can get the driver updates on the Optional Updates section under Windows Update. You may also download the latest version of the driver from the manufacturer’s website.

3] Rollback driver

If you started encountering the BSOD error after a driver update, you can rollback the driver to an earlier version and see if that helps.

4] Uninstall/Delete driver

If updating or rolling back the driver fails to resolve the issue, the next best logical solution is to uninstall the driver via Device Manager and restart your computer. When Windows 10 boots, it will automatically install the generic driver which works in most cases.

placeholder with the actual name of the driver.

Once the command executes, restart your PC and see if the particular BSOD error is resolved.

5] Fresh install driver

Before you begin this process, you need to know where the driver installer stores its temporary files. Other driver packages may use other locations, but you will need to know this information to clear these files, or Windows may attempt to install old drivers from this location.

To fresh/clean install a driver on Windows 10, do the following:

6] Disable driver signature enforcement

This solution requires you to disable driver signature enforcement. Do this and see if that helps.

7] Run the Blue Screen Online Troubleshooter

Run the Blue Screen Online Troubleshooter from Microsoft. It helps beginners & novice users troubleshoot their Blue Screens and fix the stop error automatically.

8] Scan PC with anti-rootkit software

Blue screens, can in some rare cases be caused by a rootkit infection conflicting with the Anti-cheat. Make sure to scan your PC with with an anti-rootkit software.

9] Disable Automatic Paging File Size Management

Paging file size is a memory management scheme to adjust the memory size when you have logged into your computer. This might cause the rzudd.sys BSOD error. In this case, you can disable the automatic paging file size management and give it a higher figure and see if that resolves the issue.

10] Run CHKDSK

Some BSOD issue possibly occurs due to system error or having bad sectors on the hard drive. In this case, you can run CHKDSK using the command prompt and check if it resolves the issue.

11] Run Memory Test

Corruption in RAM can potentially make Windows 10 unstable and thus trigger Blue Screen Of Death errors. So if you added a new RAM stick, remove it and check if that is causing the error. If not, then you need to run a memory test. Windows will initiate checking for the abnormalities in RAM. If it finds any, you need to replace the affected RAM.

12] Perform System Restore

It’s entirely possible that you encounter BSOD errors caused by drivers’ issues facilitated by a change that your system has gone through recently.

This solution requires you to restore your system to an earlier point. This will restore your system to an earlier point when the system was working correctly.

13] Uninstall 3rd-party security software

This solution requires you to remove all third-party antivirus programs from your PC using the dedicated removal tool to remove all files associated with your antivirus program.

If removing the antivirus fixes this error, you can now install the same antivirus again, or you can switch to an alternative software or better still stick to Windows 10 native AV program – Windows Defender.

14] Check and fix hardware issue

Hardware problems, faulty or conflicting or simply failed can cause the AcmeVideo.sys BSOD error. Hardware failing might be correctable. For example, if temperature are too high, the chip might shut down due to its emergency shutdown system. Improving the cooling to the chip in some way, will solve the problem.

The solutions provided in this post can help you resolve most BSOD errors caused by drivers on Windows 10.

Date: January 7, 2022 Tags: Blue Screen

Fix CRITICAL SERVICE FAILED Blue Screen on Windows 11

Fix REFS_FILE_SYSTEM Blue Screen error on Windows 11/10

Fix SYSTEM LICENSE VIOLATION Blue Screen error on Windows 11/10

[email protected]

Obinna Onwusobalu, has studied Information & Communication Technology and is a keen follower of the Windows ecosystem. He runs a computer software clinic. He says it’s best practice to create a System Restore Point before making any changes to your PC.

Источник

Ошибка Ndu.sys в Windows 10

Как я могу исправить ошибки Ndu.sys в Windows 10?

Ошибка «драйвер не равен или меньше (ndu.sys)» сопровождается традиционным синим экраном. Это означает, что если вы получите его во время использования, оно действительно не исчезнет, ​​если вы не перезагрузите операционную систему, и даже после этого оно может появиться случайно через несколько минут. Это сообщение об ошибке вызвано несовместимыми драйверами оборудования, а точнее драйвером беспроводного адаптера.

Решено: Ndu.sys синий экран смерти ошибка

2. Установите последние драйверы сетевой карты

Мы также рекомендуем этот сторонний инструмент (на 100% безопасный и протестированный нами) для автоматической загрузки устаревших драйверов на ваш компьютер.

3. Откат к предыдущей версии ОС

Если вышеуказанные методы не помогли решить проблему, я бы предложил вернуться к предыдущей версии ОС Windows 10 или сборке Windows 10, если вы инсайдер.

4. Проверьте наличие обновлений

5. Используйте другое подключение к Интернету

6. Сбросить Windows 10

Другим методом, который можно использовать для исправления ошибок Ndu.sys, является обновление Windows 10. После нажатия кнопки «Обновить» ОС удалит все стороннее программное обеспечение, установленное на вашем компьютере. Тем не менее, он все равно сохранит все ваши личные файлы и настройки.

7. Запустите средство устранения неполадок BSOD

Ошибки BSOD довольно часто встречаются в Windows 10. По этой причине Microsoft добавила встроенное средство устранения неполадок BSOD на страницу настроек Windows 10. Чтобы запустить этот инструмент, перейдите в Настройки> Обновление и безопасность> Устранение неполадок> выберите и запустите средство устранения неполадок «Синий экран».

8. Чистая установка Windows 10

Если ничего не помогло, чистая переустановка – это, в конце концов, последний метод. Начать с нуля позволяет избавиться от всех элементов, которые вызвали ошибки Ndu.sys и исправить проблему навсегда.

Итак, если вы хотите очистить установку Windows 10, вам нужен установочный диск или DVD и много терпения. Весь процесс обычно занимает один час или два. Вот шаги, чтобы следовать:

Если вы не хотите выполнять все перечисленные выше шаги для чистой установки Windows 10, вы можете использовать Windows Refresh Tool для выполнения этой работы.

Мы надеемся, что эти решения помогли вам настроить вашу сеть и запустить ее, пока Microsoft не выпустит исправление для этой проблемы.

Источник

Как обновить, скачать и исправить Bddci.sys

Последнее обновление: 06/30/2022 [Среднее время чтения: 4,5 мин.]

Файлы BDDCI filter driver, такие как bddci.sys, считаются разновидностью файла Win64 EXE (Драйвер). Они соотносятся с расширением SYS, разработанным компанией Bitdefender для Bitdefender BDDCI.

Файл bddci.sys впервые был выпущен в ОС Windows 10 12/03/2018 с BitDefender 1.0.14.74. Согласно нашим сведениям, это основная и наиболее актуальная версия файла от компании Bitdefender.

Продолжайте читать, чтобы найти загрузку правильной версии файла bddci.sys (бесплатно), подробные сведения о файле и порядок устранения неполадок, возникших с файлом SYS.

Рекомендуемая загрузка: исправить ошибки реестра в WinThruster, связанные с bddci.sys и (или) BitDefender.

Совместимость с Windows 10, 8, 7, Vista, XP и 2000

Средняя оценка пользователей

Обзор файла

Общие сведения ✻
Имя файла:	bddci.sys
Расширение файла:	расширение SYS
Описание:	BDDCI filter driver
Тип объектного файла:	Driver
Файловая операционная система:	Windows NT 32-bit
Тип MIME:	application/octet-stream
Пользовательский рейтинг популярности:

Сведения о разработчике и ПО
Разработчик ПО:	Bitdefender
Программа:	Bitdefender BDDCI
Авторское право:	Copyright © Bitdefender

Сведения о файле
Набор символов:	Unicode
Код языка:	English (U.S.)
Флаги файлов:	Private build
Маска флагов файлов:	0x003f
Точка входа:	0x80100
Размер кода:	637440

Информация о файле	Описание
Размер файла:	722 kB
Дата и время изменения файла:	2020:01:23 07:44:36+00:00
Тип файла:	Win64 EXE
Тип MIME:	application/octet-stream
Тип компьютера:	AMD AMD64
Метка времени:	2019:11:11 10:24:56+00:00
Тип PE:	PE32+
Версия компоновщика:	14.16
Размер кода:	637440
Размер инициализированных данных:	70656
Размер неинициализированных данных:
Точка входа:	0x80100
Версия ОС:	10.0
Версия образа:	10.0
Версия подсистемы:	6.1
Подсистема:	Native
Номер версии файла:	3.4.11.99
Номер версии продукта:	3.4.11.99
Маска флагов файлов:	0x003f
Флаги файлов:	Private build
Файловая ОС:	Windows NT 32-bit
Тип объектного файла:	Driver
Подтип файла:	7
Код языка:	English (U.S.)
Набор символов:	Unicode
Наименование компании:	Bitdefender
Описание файла:	BDDCI filter driver
Версия файла:	3.4.11.99.d41ef8d
Внутреннее имя:	bddci.sys
Авторское право:	Copyright © Bitdefender
Название продукта:	Bitdefender BDDCI
Версия продукта:	3.4.11.99.d41ef8d

✻ Фрагменты данных файлов предоставлены участником Exiftool (Phil Harvey) и распространяются под лицензией Perl Artistic.

Что такое сообщения об ошибках bddci.sys?

Bddci.sys — ошибки «синего экрана» (BSOD)

Существует ряд причин, по которым вы можете столкнуться с проблемами с bddci.sys. Большинство проблем с файлами SYS связаны с ошибками «синего экрана» (BSOD). Эти типы ошибок bddci.sys могут быть вызваны аппаратными проблемами, устаревшей прошивкой, поврежденными драйверами или другими проблемами, связанными с программным обеспечением (например, обновление BitDefender). В число этих ошибок входят:

Обнаружена проблема, в результате которой ОС Windows завершила работу, чтобы предотвратить повреждение компьютера. По всей видимости, причиной проблемы стал следующий файл: bddci.sys.

🙁 На вашем ПК возникла проблема, которую не удалось устранить, и его необходимо перезагрузить. Сведения об ошибке можно найти в Интернете: [BSOD] (bddci.sys).

STOP 0x0000007E: SYSTEM THREAD EXCEPTION NOT HANDLED (bddci.sys)
STOP 0x0000003B: SYSTEM SERVICE EXCEPTION (bddci.sys)
STOP 0×0000007A: KERNEL DATA INPAGE (bddci.sys)
STOP 0x0000000A: IRQL NOT LESS EQUAL (bddci.sys)
STOP 0x00000050: PAGE FAULT IN A NONPAGED AREA (bddci.sys)
STOP 0x0000001E: KMODE EXCEPTION NOT HANDLED (bddci.sys)

Крайне важно устранять ошибки «синего экрана»

В большинстве случаев ошибки BSOD bddci.sys возникают после установки нового оборудования, программного обеспечения (BitDefender) или выполнения неудачного обновления Windows. В остальных случаях к ошибке «синего экрана» bddci.sys может привести повреждение программного обеспечения, вызванное заражением вредоносным программным обеспечением. Таким образом, крайне важно, чтобы антивирус постоянно поддерживался в актуальном состоянии и регулярно проводил сканирование системы.

СОВЕТ ОТ СПЕЦИАЛИСТА: Как показывает опыт, целесообразно всегда создавать резервную копию системы Windows и (или) точку восстановления системы, прежде чем вносить какие-либо изменения в аппаратное или программное обеспечение на компьютере. Таким образом, в случае неблагоприятного поворота событий и возникновения связанной с файлом bddci.sys ошибки «синего экрана» после недавних изменений можно восстановить систему в предыдущее состояние.

Как исправить ошибки bddci.sys — 3-шаговое руководство (время выполнения:

Если вы столкнулись с одним из вышеуказанных сообщений об ошибке, выполните следующие действия по устранению неполадок, чтобы решить проблему bddci.sys. Эти шаги по устранению неполадок перечислены в рекомендуемом порядке выполнения.

Шаг 1. Восстановите компьютер до последней точки восстановления, «моментального снимка» или образа резервной копии, которые предшествуют появлению ошибки.

Чтобы начать восстановление системы (Windows XP, Vista, 7, 8 и 10):

Если на этапе 1 не удается устранить ошибку bddci.sys, перейдите к шагу 2 ниже.

Шаг 2. Если вы недавно установили приложение BitDefender (или схожее программное обеспечение), удалите его, затем попробуйте переустановить BitDefender.

Чтобы удалить программное обеспечение BitDefender, выполните следующие инструкции (Windows XP, Vista, 7, 8 и 10):

После полного удаления приложения следует перезагрузить ПК и заново установить BitDefender.

Если на этапе 2 также не удается устранить ошибку bddci.sys, перейдите к шагу 3 ниже.

Шаг 3. Выполните обновление Windows.

Когда первые два шага не устранили проблему, целесообразно запустить Центр обновления Windows. Во многих случаях возникновение сообщений об ошибках bddci.sys может быть вызвано устаревшей операционной системой Windows. Чтобы запустить Центр обновления Windows, выполните следующие простые шаги:

Если Центр обновления Windows не смог устранить сообщение об ошибке bddci.sys, перейдите к следующему шагу. Обратите внимание, что этот последний шаг рекомендуется только для продвинутых пользователей ПК.

Если эти шаги не принесут результата: скачайте и замените файл bddci.sys (внимание: для опытных пользователей)

Если этот последний шаг оказался безрезультативным и ошибка по-прежнему не устранена, единственно возможным вариантом остается выполнение чистой установки Windows 10.

Источник

Today, we will discuss all the possible workarounds to resolve PAGE FAULT IN NONPAGED AREA, another Blue Screen of Death error in Windows 10. The Stop code indicates a failure in rzudd.sys. Basically, “rzudd.sys” is a Razer Rzudd Engine driver, a part of Razer Synapse software which crashed down and leads to the BSOD screen. Experts are with a view that this issue is triggered when Driver Verifier is enabled.

However, as per some other techies, PAGE FAULT IN NONPAGED AREA (rzudd.sys) may also occur because of memory corruption. So, if you get the same rzudd.sys Blue Screen issue, then you should perform certain troubleshooting methods. The Razer Support team suggests to disable and enable Driver Verifier to get rid of the problem. Furthermore, you should also check the memory as well as disk, remove third-party antivirus, or update drivers to fix the issue.

PAGE FAULT IN NONPAGED AREA (rzudd.sys) –

Here is how to fix PAGE FAULT IN NONPAGED AREA (rzudd.sys) Blue Screen Error Windows 10.

When BSOD error appears on your PC, you cannot access the login screen. It becomes difficult to perform any of the fixes, therefore, you must Boot into Safe Mode then try the solutions.

To begin with, you need to disconnect all external devices. Then insert “Windows 10 installation media”. You can use DVD or USB into the respective port of the device and restart the system.

Simultaneously make a hit on any of the function keys such as Esc, Delete, F2, F8, F10, F12 or Backspace repeatedly. The function key completely depends upon your PC’s model. Continuously pressing it will open your system into boot mode.

Henceforth select a preferred language and hit Next.

Click on Repair your computer option which appears on the bottom left of the screen.

Now, navigate to Troubleshoot => Advanced Options => Startup Settings.

Finally, select Enable Safe Mode from the list of options that show up on the following screen. Click Restart and wait until the PC enters the Safe Mode.

Perform a Disk and Memory Check

The BSOD error is caused due to the fault in the disk drive or associated components such as RAM or NTFS volume. So you should check the system files to avert the PAGE FAULT IN NONPAGED AREA issue.

Here are the steps-

Step-1: Go to the Start Menu and type cmd. Here right click on Command Prompt and select Run as administrator option.

Step-2: Click Yes to give authentication to the UAC prompt.

Step-3: Now on the elevated Command Prompt copy-paste or type the following syntax and hit Enter to execute it.

chkdsk /f /r

The structure of this code is like chkdsk [Drive:] [parameters] where f denotes to avoid the issue found on the volume. In a similar way, r catch the fault from poor sections on the volume and retrieve the readable data.

Step 4: Since your PC is busy to complete other processes, press Y key to schedule this task after rebooting.

Step-5: Press Win logo & R hotkeys altogether and write mdsched.exe in the Run dialog box and hit Enter.

Step-6: Now, make a click on the first option Restart now and check for problems (recommended) to instantly restart Windows 10 PC.

Step-7: This process will take approx. 15 minutes to complete the task, therefore, wait patiently.

Once you finish the process, hopefully, the issue rzudd.sys will disappear from the system. If you still face it, follow the next workaround.

Uninstall and Reinstall Driver Verifier

The Driver Verifier is the Microsoft’s app generated for Windows user to distinguish between original and third party driver installed on your PC. It also helps to recognize the faulty and missing hardware driver inside the system. Razer Stargazer’s camera driver crashes when Driver Verifier is enabled which eventually leads to PAGE FAULT IN NONPAGED AREA (rzudd.sys) Blue Screen Error Windows 10.

See our article on How to Identify if a Driver is Causing Issues in Windows 10 with Verifier.

As per the several users’ report, you can uninstall and re-install this software to avert the issue in your computer. Here is the process to follow –

Disable Driver verifier

As you are unable to access the desktop, you need to insert Windows 10 installation media. Start your PC after inserting the media.

Choose the Language preferences on the subsequent screen and click Next. On the Setup dialog, click Repair your computer.

Click on Troubleshoot and henceforth perform a hit on Advanced options.

Thereafter in the “Advanced Options”, click on the Startup Settings.

Now, move the cursor down and make a click on Restart button.

Finally, select “Disable driver signature enforcement” from the list of options.

Enable Driver verifier

Press “Windows and R” hotkeys and type cmd then hit Enter to access the Command Prompt.

On prompt area type verifier then hit Enter. Keep patience until the Operation is completed successfully message appears.

Once the verifier code is completed, open this app and activate the checkbox Create custom settings (for code developers).

Move down and click on Next button.

On the following screen, check the below-given options.

• I/O Verification
• Force pending I/O requests
• IRP logging

Then again make a click on Next.

Moving on, choose the option Select driver names from the list and hit Next.

Go ahead and tap the Provider header. It will sort the driver providers name alphabetically. Here select all the drivers which don’t have the provider name as Microsoft Corporation.

Finally, reboot the system and you will notice that the Driver Verifier is enabled on your computer. Now check the issue PAGE FAULT IN NONPAGED AREA has been resolved on your PC.

Undo Recent Changes

The apps or device which you have recently installed on your PC might be one of the reasons for the occurrence of PAGE FAULT IN NONPAGED AREA error. Thus you need to identify the changes which have been performed. If it is an installation of a software, then uninstall it right away and check for the issue. Or if any hardware modification is done, then try to revert back the changes. If this fix does not help you to resolve the rzudd.sys then follow below methods.

Remove antivirus program if installed

Antivirus software is a security program used to protect your PC from unwanted threats. However, the anti-malware app prevents the working of some system files which could be the culprit behind BSOD rzudd.sys issue. Hence uninstall any third-party antivirus program. Here is how to proceed:

Press Windows and I keys jointly to open Windows Settings and click the Apps category.

Under Apps and features menu go to the right pane and scroll down the cursor to locate third-party software.

When you find the app, click on the same and hit the Uninstall button.

Finally, close the windows and try to login on your PC in normal mode.

Note: You can use Windows Security (the built app) instead of other third-party programs for a safe and secure purpose.

Disable Automatic Paging File Size Management

Paging file size is a memory management scheme to adjust the memory size when you have logged into your computer. The less extent might cause the rzudd.sys error with BSOD. So adjust the paging management by following these steps.

Go to the Taskbar and click on the File Explorer icon. If you are unable to locate the icon then press Windows and E keys jointly to open the same.

In the left pane, perform a right click on This PC option and select Properties from the context menu.

Succeeding this, hit Advanced system settings in the new window.

While proceeding ahead, in the Advanced tab, under the “Performance” section click on the Settings button.

This will prompt up Performance Options dialog. Switch to the Advanced tab and click on Change.

Here you have to make sure the first option “Automatically manage paging file size for all drives” is unchecked. Click OK to implement the modifications on the Paging File.

Lastly, Reboot the device and check whether the issue PAGE FAULT IN NONPAGED AREA is rectified or continue to persist.

Update device drivers

The faulty and missing device drivers in the computer also lead to several types of issues which also includes PAGE FAULT IN NONPAGED AREA error. Thus identify the corrupt drivers and try to update them according to your system model.

Do a right-click on Start icon and click “Device Manager” from the Win+X Menu.

Here, expand each category and see which device displays a yellow exclamation mark. Right-click on that specific device and choose “Update driver“.

On the following wizard, choose the option namely “Search automatically for updated driver software” and go through the guidelines to finish the update.

Hopefully, you will be able to bypass PAGE FAULT IN NONPAGED AREA (rzudd.sys) Blue Screen Error in Windows 10.

That’s all

Repair any Windows problems such as Blue/Black Screen, DLL, Exe, application, Regisrty error and quickly recover system from issues using Reimage.

Как исправить ошибку Video_TDR_Failure в Windows 10

Atikmpag.sys, nvlddmkm.sys и igdkmd64.sys — это сообщение об ошибке, которое вы обнаруживаете на синем экране смерти (BSOD) в Windows 10. Это сообщение появляется в основном при обновлении Windows с более старой версии до последней. Как правило, возникает конфликт между аппаратными и внешними драйверами графических карт во время обновления. Иногда эта ошибка переходит в цикл перезапуска и процесс заканчивается тем, что отображает следующее сообщение об ошибке:

При желании вы можете найти в Интернете информацию по этому коду ошибки: Video TDR Failure (atikmpag.sys) (nvlddmkm.sys) (igdkmd64.sys).

• atikmpag.sys — Системный файл драйвера видеокарты AMD Readon.
• nvlddmkm.sys — Системный файл драйвера видеокарты GeForce.
• igdkmd64.sys — системный файл драйвера Intel Graphics.

Ошибка BSOD (синего экрана) всегда вызывает тревогу и настораживает. Большинство пользователей с видеокартами AMD, GeForce и Intel Graphics, жалуются, что встречают эту ошибку. Существует системный файл с именем atikmpag.sys, nvlddmkm.sys и igdkmd64.sys, который заставляет компьютер показывать «синий экран смерти». Если это произойдет в вашем случае, вы можете попробовать сначала обновить драйверы. Есть еще одно эффективное решение, чтобы исправить ошибку atikmpag.sys, nvlddmkm.sys, igdkmd64.sys на синем экране с сообщением Video TDR Failure в Windows 10, которое мы рассмотрим ниже.

Исправить ошибку atikmpag.sys, nvlddmkm.sys, igdkmd64.sys в Windows 10

Поскольку конфликт между оборудованием и драйверами создает проблему, удаление проблемных драйверов в безопасном режиме приведет к устранению ошибки. Следующие шаги помогут вам легко исправить ошибку:

1. Нажмите меню «Пуск«, затем нажмите на иконку «Выключение«.

2. Зажмите кнопку Shift + Перезагрузка. Вам нужно нажать и удерживать кнопку Шифт, затем мышкой нажат на пункт «Перезагрузка«.

3. В следующим окне синем окне «среда восстановления» перейдите по параметрам «Поиск и устранение неисправностей» > «Дополнительные параметры» > «Параметры загрузки» > «Перезагрузить«.

4. После перезапуска, выберите вариант загрузки в «безопасном режиме«. Нажмите на кнопку F4, F5 или F6, чтобы Включить безопасный режим с вашими потребностями.

5. После перезагрузки в безопасном режиме вам необходимо удалить уязвимые драйверы, создающие ошибку. Зажмите горячие кнопки Windows + X и выберите «Диспетчер устройств» из списка.

6. Найдите строку «Видеоадаптеры«, затем раздвиньте дерево и вы увидите свою видеокарту. Нажмите на ней правой кнопкой мыши и «Удалить устройство«.

7. Если вам будет предложено «Удалить программы драйверов для этого устройства«, то поставьте галочку и нажмите «Удалить«.

Ошибка PAGE FAULT IN NONPAGED AREA в Windows 10

Разберем решения ошибки PAGE FAULT IN NONPAGED AREA, еще одной проблемы синего экрана в Windows 10. Код указывает на сбой в rzudd.sys. rzudd.sys — это драйвер Razer Rzudd Engine, входящий в состав программного обеспечения Razer Synapse, которое сломалось и привело к BSOD. В большинстве случая эта проблема возникает, когда включен Driver Verifier. Однако, по мнению некоторых отзывов на форумах Microsoft, ошибка PAGE FAULT IN NONPAGED AREA (rzudd.sys) также может произойти из-за повреждения памяти. Команда поддержки Razer предлагает отключить и включить Driver Verifier, чтобы избавиться от проблемы. Кроме того, вы должны также проверить память, жесткий диск, удалить сторонний антивирус или обновить драйверы, чтобы устранить проблему.

Исправить ошибку PAGE FAULT IN NONPAGED AREA

Когда на вашем ПК появляется ошибка BSOD, вы не можете получить доступ к рабочему столу. Трудно выполнить какие-либо исправления, поэтому вы должны создать установочную Windows 10 на флешку и зайти в безопасный режим, через установку систему. Перед процедурой отключите все лишние USB устройства.

Шаг 1. Вставьте установочный носитель Windows 10 и запустите установку. Следуйте до пункта установки и нажмите снизу на «Восстановление системы», чтобы попасть в дополнительные настройки Windows.

Шаг 2. Далее можете ориентироваться по картинкам в этой статье, как запустить безопасный режим , но а я кратко опишу. Перейдите по следующим параметрам «Поиск и устранение неисправностей» > «Дополнительные параметры» > «Параметры загрузки» > «Перезагрузить» > «Нажмите на клавиатуре F4«. Загрузились на рабочий стол и следуем ниже пунктам.

Если у вас ошибка PAGE FAULT IN NONPAGED AREA с кодом rzudd.sys, то вам нужно «Отключить обязательную проверку подписи драйвера». Смотрите на картинку ниже, это F7. Далее удалите и обновите драйвер от Razer. Перезагрузите ПК.

Шаг 3. Когда загрузились на рабочий стол, то выполните следующие пункты, чтобы исправить ошибку PAGE_FAULT_IN_NONPAGED_AREA:

1. Проверьте драйверы и обновите их в диспетчере устройств.
2. Проверьте жесткий диск на ошибки.
3. Проверьте целостность системных файлов.
4. Проверьте оперативную памяти на ошибки .
5. Удалите сторонние антивирусы.
6. Попробуйте вспомнить, может вы недавно установили какую-либо программу и ошибка начала появляться. Удалите ту программу.
7. Сделайте фиксированный файл подкачки , а не автоматический.
8. Попробуйте откатить систему назад к рабочей точке .
9. Сбросить Windows на заводские настройки с сохранением файлов.

Fix FaceIt.sys, rzudd.sys or AcmeVideo.sys BSOD error on Windows 10

Blue Screen of Death errors are fairly common on Windows 10. Quite a significant number of these BSOD errors are caused by corrupted, outdated, incompatible drivers. In this post, we focus on three of such drivers viz; FaceIt.sys, rzudd.sys and AcmeVideo.sys. This post will offer the most suitable solutions to BSOD errors that you might encounter on your Windows 10 device, triggered by these aforementioned drivers.

Before we get right to it. let’s ID these drivers in relation to which apps and processes they belong to.

FaceIt.sys

The FaceIt.sys is an anti-cheat driver for games digitally signed by FACE IT LIMITED.

Rzudd.sys

This file most often belongs to the product Razer Rzudd Engine. The driver is developed by company Razer USA Ltd.

AcmeVideo.sys

This file is a video driver for hardware by ACME Video Solutions.

FaceIt.sys, rzudd.sys or AcmeVideo.sys BSOD error

If you’re faced with a BSOD error indicating FaceIt.sys, rzudd.sys, or AcmeVideo.sys driver failed, you can try our recommended solutions below. See which of these solutions may apply in your case.

1. Run Driver Verifier
2. Update driver
3. Rollback driver
4. Uninstall/Delete driver
5. Fresh install driver
6. Disable driver signature enforcement
7. Run the Blue Screen Online Troubleshooter
8. Scan PC with anti-rootkit software
9. Disable Automatic Paging File Size Management
10. Run CHKDSK
11. Run Memory Test
12. Perform System Restore
13. Uninstall 3rd-party security software
14. Check and fix hardware issue

Let’s take a look at the description of the process involved concerning each of the listed solutions.

If you can log in normally, good; else you will have to boot into Safe Mode, enter the Advanced Startup options screen, or use the Installation Media to boot to be able to carry out these instructions.

1] Run Driver Verifier

It is estimated that about three-quarters of blue screens are caused by faulty drivers. Driver Verifier is a tool that runs in real-time to examine the behavior of drivers. For example, Driver Verifier checks the use of memory resources, such as memory pools. If it sees errors in the execution of driver code, it proactively creates an exception to allow that part of the driver code to be further scrutinized. The Driver Verifier Manager is built into Windows 10. You can configure which drivers you would like to verify. The code that verifies drivers adds overhead as it runs, so try and verify the smallest number of drivers as possible.

2] Update driver

Faulty or outdated drivers may trigger this BSODerror as well.

In this case, you can either update your driver manually via the Device Manager, or you can get the driver updates on the Optional Updates section under Windows Update. You may also download the latest version of the driver from the manufacturer’s website.

3] Rollback driver

If you started encountering the BSOD error after a driver update, you can rollback the driver to an earlier version and see if that helps.

4] Uninstall/Delete driver

If updating or rolling back the driver fails to resolve the issue, the next best logical solution is to uninstall the driver via Device Manager and restart your computer. When Windows 10 boots, it will automatically install the generic driver which works in most cases.

Alternatively, you can delete the driver via command prompt. Here’s how:

• Press Windows key + R to invoke the Run dialog.
• In the Run dialog box, type cmd and then press CTRL + SHIFT + ENTER to open Command Prompt in admin/elevated mode.
• In the command prompt window, type the command below and hit Enter after each line. Replace the

placeholder with the actual name of the driver.

Once the command executes, restart your PC and see if the particular BSOD error is resolved.

5] Fresh install driver

Before you begin this process, you need to know where the driver installer stores its temporary files. Other driver packages may use other locations, but you will need to know this information to clear these files, or Windows may attempt to install old drivers from this location.

To fresh/clean install a driver on Windows 10, do the following:

• Make sure you have the latest driver installer for the driver you will be installing.
• Right-click Start and click Apps and Features and uninstall any applications associated with the drivers that you will be reinstalling.
• Restart your machine using Start > Power > Restart. Do not use your machine’s power button. This button is often mapped to the “Sleep” function and does not serve the same purpose. Restarting your machine clears any running processes that may be tied to files in the temporary folders.
• Delete all temporary installation files for the device driver.
• Right-click Start and click Device Manager.
• Click View and click Show hidden devices (Note: this will reveal many devices that are no longer attached to your machine, as well as devices that should not be touched. If in doubt, leave it alone).
• Find the device whose driver you are uninstalling or reinstalling.
• Right-click the device and click Uninstall.
• Check the box for Remove the driver software for this device, if the option exists.
• Click the Uninstall button.
• Uninstall any duplicates of this device, even if they are grayed out.
• Once the Device Manager has completed uninstalling the drivers, click the light-blue Scan for hardware changes icon at the top of Device Manager. The device will probably reappear. If there were multiples, only one should appear.
• Repeat the step to uninstall until you no longer see the option to Remove the driver software for this device. At this point, you have removed all installed drivers from the driver store. If Windows has a default driver, it will still reinstall that driver, but you can generally leave that driver in place as it ships with Windows.
• Restart your machine once more.
• Run the installer for the latest drivers.

6] Disable driver signature enforcement

This solution requires you to disable driver signature enforcement. Do this and see if that helps.

7] Run the Blue Screen Online Troubleshooter

Run the Blue Screen Online Troubleshooter from Microsoft. It helps beginners & novice users troubleshoot their Blue Screens and fix the stop error automatically.

8] Scan PC with anti-rootkit software

Blue screens, can in some rare cases be caused by a rootkit infection conflicting with the Anti-cheat. Make sure to scan your PC with with an anti-rootkit software.

9] Disable Automatic Paging File Size Management

Paging file size is a memory management scheme to adjust the memory size when you have logged into your computer. This might cause the rzudd.sys BSOD error. In this case, you can disable the automatic paging file size management and give it a higher figure and see if that resolves the issue.

10] Run CHKDSK

Some BSOD issue possibly occurs due to system error or having bad sectors on the hard drive. In this case, you can run CHKDSK using the command prompt and check if it resolves the issue.

11] Run Memory Test

Corruption in RAM can potentially make Windows 10 unstable and thus trigger Blue Screen Of Death errors. So if you added a new RAM stick, remove it and check if that is causing the error. If not, then you need to run a memory test. Windows will initiate checking for the abnormalities in RAM. If it finds any, you need to replace the affected RAM.

12] Perform System Restore

It’s entirely possible that you encounter BSOD errors caused by drivers’ issues facilitated by a change that your system has gone through recently.

This solution requires you to restore your system to an earlier point. This will restore your system to an earlier point when the system was working correctly.

13] Uninstall 3rd-party security software

This solution requires you to remove all third-party antivirus programs from your PC using the dedicated removal tool to remove all files associated with your antivirus program.

If removing the antivirus fixes this error, you can now install the same antivirus again, or you can switch to an alternative software or better still stick to Windows 10 native AV program – Windows Defender.

14] Check and fix hardware issue

Hardware problems, faulty or conflicting or simply failed can cause the AcmeVideo.sys BSOD error. Hardware failing might be correctable. For example, if temperature are too high, the chip might shut down due to its emergency shutdown system. Improving the cooling to the chip in some way, will solve the problem.

The solutions provided in this post can help you resolve most BSOD errors caused by drivers on Windows 10.

Date: January 7, 2021 Tags: Stop Errors

Free Fake Blue Screen of Death generator apps for Windows 10

SYSTEM_SERVICE_EXCEPTION (ks.sys) Blue Screen error on Windows 10

Fix intelppm.sys Blue Screen error on Windows 10

[email protected]

Obinna Onwusobalu, has studied Information & Communication Technology and is a keen follower of the Windows ecosystem. He runs a computer software clinic. He says it’s best practice to create a System Restore Point before making any changes to your PC. You can contact him on Twitter @ChidumOsobalu.

We’ve Updated Our Policies

Blue Screen of Death errors are fairly common on Windows 10. Quite a significant number of these BSOD errors are caused by corrupted, outdated, incompatible drivers. In this post, we focus on three of such drivers viz; FaceIt.sys, rzudd.sys and AcmeVideo.sys. This post will offer the most suitable solutions to BSOD errors that you might encounter on your Windows 10 device, triggered by these aforementioned drivers.

Before we get right to it. let’s ID these drivers in relation to which apps and processes they belong to.

FaceIt.sys

The FaceIt.sys is an anti-cheat driver for games digitally signed by FACE IT LIMITED.

Rzudd.sys

This file most often belongs to the product Razer Rzudd Engine. The driver is developed by company Razer USA Ltd.

AcmeVideo.sys

This file is a video driver for hardware by ACME Video Solutions.

If you’re faced with a BSOD error indicating FaceIt.sys, rzudd.sys, or AcmeVideo.sys driver failed, you can try our recommended solutions below. See which of these solutions may apply in your case.

1. Run Driver Verifier
2. Update driver
3. Rollback driver
4. Uninstall/Delete driver
5. Fresh install driver
6. Disable driver signature enforcement
7. Run the Blue Screen Online Troubleshooter
8. Scan PC with anti-rootkit software
9. Disable Automatic Paging File Size Management
10. Run CHKDSK
11. Run Memory Test
12. Perform System Restore
13. Uninstall 3rd-party security software
14. Check and fix hardware issue

Let’s take a look at the description of the process involved concerning each of the listed solutions.

If you can log in normally, good; else you will have to boot into Safe Mode, enter the Advanced Startup options screen, or use the Installation Media to boot to be able to carry out these instructions.

1] Run Driver Verifier

It is estimated that about three-quarters of blue screens are caused by faulty drivers. Driver Verifier is a tool that runs in real-time to examine the behavior of drivers. For example, Driver Verifier checks the use of memory resources, such as memory pools. If it sees errors in the execution of driver code, it proactively creates an exception to allow that part of the driver code to be further scrutinized. The Driver Verifier Manager is built into Windows 10. You can configure which drivers you would like to verify. The code that verifies drivers adds overhead as it runs, so try and verify the smallest number of drivers as possible.

2] Update driver

Faulty or outdated drivers may trigger this BSODerror as well.

In this case, you can either update your driver manually via the Device Manager, or you can get the driver updates on the Optional Updates section under Windows Update. You may also download the latest version of the driver from the manufacturer’s website.

3] Rollback driver

If you started encountering the BSOD error after a driver update, you can rollback the driver to an earlier version and see if that helps.

4] Uninstall/Delete driver

If updating or rolling back the driver fails to resolve the issue, the next best logical solution is to uninstall the driver via Device Manager and restart your computer. When Windows 10 boots, it will automatically install the generic driver which works in most cases.

Alternatively, you can delete the driver via command prompt. Here’s how:

• Press Windows key + R to invoke the Run dialog.
• In the Run dialog box, type cmd and then press CTRL + SHIFT + ENTER to open Command Prompt in admin/elevated mode.
• In the command prompt window, type the command below and hit Enter after each line. Replace the <ProblematicDriver.sys> placeholder with the actual name of the driver.

cd C:/Windows/System32/drivers
del <ProblematicDriver.sys>

Once the command executes, restart your PC and see if the particular BSOD error is resolved.

5] Fresh install driver

Before you begin this process, you need to know where the driver installer stores its temporary files. Other driver packages may use other locations, but you will need to know this information to clear these files, or Windows may attempt to install old drivers from this location.

To fresh/clean install a driver on Windows 10, do the following:

• Make sure you have the latest driver installer for the driver you will be installing.
• Right-click Start and click Apps and Features and uninstall any applications associated with the drivers that you will be reinstalling.
• Restart your machine using Start > Power > Restart. Do not use your machine’s power button. This button is often mapped to the “Sleep” function and does not serve the same purpose. Restarting your machine clears any running processes that may be tied to files in the temporary folders.
• Delete all temporary installation files for the device driver.
• Right-click Start and click Device Manager.
• Click View and click Show hidden devices (Note: this will reveal many devices that are no longer attached to your machine, as well as devices that should not be touched. If in doubt, leave it alone).
• Find the device whose driver you are uninstalling or reinstalling.
• Right-click the device and click Uninstall.
• Check the box for Remove the driver software for this device, if the option exists.
• Click the Uninstall button.
• Uninstall any duplicates of this device, even if they are grayed out.
• Once the Device Manager has completed uninstalling the drivers, click the light-blue Scan for hardware changes icon at the top of Device Manager. The device will probably reappear. If there were multiples, only one should appear.
• Repeat the step to uninstall until you no longer see the option to Remove the driver software for this device. At this point, you have removed all installed drivers from the driver store. If Windows has a default driver, it will still reinstall that driver, but you can generally leave that driver in place as it ships with Windows.
• Restart your machine once more.
• Run the installer for the latest drivers.

6] Disable driver signature enforcement

This solution requires you to disable driver signature enforcement. Do this and see if that helps.

7] Run the Blue Screen Online Troubleshooter

Run the Blue Screen Online Troubleshooter from Microsoft. It helps beginners & novice users troubleshoot their Blue Screens and fix the stop error automatically.

8] Scan PC with anti-rootkit software

Blue screens, can in some rare cases be caused by a rootkit infection conflicting with the Anti-cheat. Make sure to scan your PC with with an anti-rootkit software.

9] Disable Automatic Paging File Size Management

Paging file size is a memory management scheme to adjust the memory size when you have logged into your computer. This might cause the rzudd.sys BSOD error. In this case, you can disable the automatic paging file size management and give it a higher figure and see if that resolves the issue.

10] Run CHKDSK

Some BSOD issue possibly occurs due to system error or having bad sectors on the hard drive. In this case, you can run CHKDSK using the command prompt and check if it resolves the issue.

11] Run Memory Test

Corruption in RAM can potentially make Windows 10 unstable and thus trigger Blue Screen Of Death errors. So if you added a new RAM stick, remove it and check if that is causing the error. If not, then you need to run a memory test. Windows will initiate checking for the abnormalities in RAM. If it finds any, you need to replace the affected RAM.

12] Perform System Restore

It’s entirely possible that you encounter BSOD errors caused by drivers’ issues facilitated by a change that your system has gone through recently.

This solution requires you to restore your system to an earlier point. This will restore your system to an earlier point when the system was working correctly.

13] Uninstall 3rd-party security software

This solution requires you to remove all third-party antivirus programs from your PC using the dedicated removal tool to remove all files associated with your antivirus program.

If removing the antivirus fixes this error, you can now install the same antivirus again, or you can switch to an alternative software or better still stick to Windows 10 native AV program – Windows Defender.

14] Check and fix hardware issue

Hardware problems, faulty or conflicting or simply failed can cause the AcmeVideo.sys BSOD error. Hardware failing might be correctable. For example, if temperature are too high, the chip might shut down due to its emergency shutdown system. Improving the cooling to the chip in some way, will solve the problem.

The solutions provided in this post can help you resolve most BSOD errors caused by drivers on Windows 10.