Скачать openscad на русском языке для windows 10

System requirements: OS X 10.9 or newer

Debian / Ubuntu / Kubuntu

OpenSCAD is available in the repositories of most recent distributions.

					$ sudo apt-get install openscad
				

Fedora

OpenSCAD is available in Fedora official repositories. To install, run the following command:

					# yum install openscad
				

If you want the MCAD library:

					# yum install openscad-MCAD
				

Arch Linux

					# pacman -S openscad
				

Other Linux

App Stores

NetBSD (>=6.1)

Set up pkgin and run this command:

					# pkgin install openscad
				

FreeBSD (>=10)

					# pkg install openscad
				

OpenBSD

OpenSCAD is available for amd64, i386 and macppc in OpenBSD packages:

					# pkg_add openscad
				

macOS

System requirements: macOS 10.13 «High Sierra» or newer, universal build supporting Intel and M1 systems.

Windows

System requirements: Windows 10 or newer, Intel systems.

Linux — AppImage

Please try the automatically built snapshots first if you are running a
supported distribution (see below), the
following AppImage builds are still experimental.

The ARM 64-bit (aarch64) AppImage is built and tested only for
Raspberry PI OS 64-bit
(which may still be in beta test).

Linux — Snap

Or install with

					# snap install openscad-nightly
				

To use Gamepads or supported 3D Mouse devices (like the SpaceMouse series
from 3D Connexion) the following command is needed to allow the snap package
access to the joystick interface.

					# snap connect openscad:joystick snapd:joystick
				

WebAssembly

Many thanks to Dominick (DSchroer) for making this
possible. Build instructions and examples can be found in the
openscad-wasm repository on github

The ZIP package contains an experimental build based on this work for
WebAssembly allowing OpenSCAD to run inside a web browser.
Right now it’s a bit slow and there’s no support for preview, fonts or a built-in GUI. Some of
those things will hopefully be supported or improved soon, however GUI support is unlikely to
be added.

Try it out at https://ochafik.com/openscad or start with a
slightly bigger example.

Linux — Distribution Packages

The packages are automatically built based on the
master branch on github.

Note: The packages are called «openscad-nightly» so it’s possible to
install the development snapshot packages in parallel to the release version
from the official repositories.

Debian / Ubuntu packages built on OpenSUSE build service

To install the packages, the release key must be added with apt-key to the key-ring to allow
apt-get / aptitude to validate the packages.
Key ID: 75F3214F30EB8E08 (valid till 2023-06-14)
Key UID: home:t-paul OBS Project <home:t-paul@build.opensuse.org>

NOTE: If you get errors about an expired key valid till 2021-04-18, please re-import via the following command.

					# wget -qO- https://files.openscad.org/OBS-Repository-Key.pub | sudo apt-key add -
				

In newer Debian the storage for the key is changed, more information can be found in the apt-key(8)
manual page. In this case the following command will download and store the key.

					# wget -qO- https://files.openscad.org/OBS-Repository-Key.pub | sudo tee /etc/apt/trusted.gpg.d/obs-openscad-nightly.asc
				

After the key is added, the repository URL needs to be configured. This can be done by creating a new
file /etc/apt/sources.list.d/openscad.list with the URL specific to the distribution.

The repository links below are shown as https, please check for your installation if
https is supported. In Debian/Ubuntu this is usually handled by the
apt-transport-https package. OBS also supports HTTP links, but it’s recommended to use
https whenever possible.

Debian 10 (Buster)

					deb https://download.opensuse.org/repositories/home:/t-paul/Debian_10/ ./
				

Debian 11 (Bullseye)

					deb https://download.opensuse.org/repositories/home:/t-paul/Debian_11/ ./
				

Debian Testing

					deb https://download.opensuse.org/repositories/home:/t-paul/Debian_Testing/ ./
				

Debian Unstable

					deb https://download.opensuse.org/repositories/home:/t-paul/Debian_Unstable/ ./
				

Ubuntu 18.04

					deb https://download.opensuse.org/repositories/home:/t-paul/xUbuntu_18.04/ ./
				

Ubuntu 20.04

					deb https://download.opensuse.org/repositories/home:/t-paul/xUbuntu_20.04/ ./
				

Ubuntu 20.10 (x86_64, aarch64)

					deb https://download.opensuse.org/repositories/home:/t-paul/xUbuntu_20.10/ ./
				

Ubuntu 21.04 (x86_64, aarch64)

					deb https://download.opensuse.org/repositories/home:/t-paul/xUbuntu_21.04/ ./
				

Ubuntu 21.10 (x86_64, aarch64)

					deb https://download.opensuse.org/repositories/home:/t-paul/xUbuntu_21.10/ ./
				

Ubuntu 22.04 (x86_64, aarch64)

					deb https://download.opensuse.org/repositories/home:/t-paul/xUbuntu_22.04/ ./
				

openSUSE packages built on OpenSUSE build service

openSUSE Leap 15.3 (64-bit only)

					https://download.opensuse.org/repositories/home:/t-paul/openSUSE_Leap_15.3/
				

openSUSE Leap 15.4 (64-bit only)

					https://download.opensuse.org/repositories/home:/t-paul/openSUSE_Leap_15.4/
				

openSUSE Tumbleweed

					https://download.opensuse.org/repositories/home:/t-paul/openSUSE_Tumbleweed/
				

Fedora packages built on OpenSUSE build service

Fedora 34 (x86_64, armv7l, aarch64, ppc64le)

					https://download.opensuse.org/repositories/home:/t-paul/Fedora_34/
				

Fedora 35 (x86_64, armv7l, aarch64, ppc64le)

					https://download.opensuse.org/repositories/home:/t-paul/Fedora_35/
				

Fedora 36 (x86_64, armv7l, aarch64, ppc64le)

					https://download.opensuse.org/repositories/home:/t-paul/Fedora_36/
				

Fedora 37 (x86_64, armv7l, aarch64, ppc64le)

					https://download.opensuse.org/repositories/home:/t-paul/Fedora_37/
				

Fedora Rawhide (x86_64, i586)

					https://download.opensuse.org/repositories/home:/t-paul/Fedora_Rawhide/
				

Arch Linux

To install OpenSCAD from git on Arch Linux the
openscad-git pkgbuild
is available on AUR.