Скачать rsat для windows server 2008

Applies to

All systems

Windows 10, Windows 8.1, Windows 8, Windows 7, Windows Vista, Windows Server Technical Preview, Windows Server 2012 R2, Windows Server 2012, Windows Server 2008, and Windows Server 2008 R2

Introduction

Remote Server Administration Tools (RSAT) enables IT administrators to remotely manage roles and features in Windows Server 2012 R2, Windows Server 2012, Windows Server 2008 or Windows Server 2008 R2 from a computer that is running Windows 10, Windows 8.1,
Windows 8, Windows Vista, or Windows 7.

RSAT cannot be installed on computers that are running Home, Standard, or Education editions of Windows. You can only install RSAT on Professional or Enterprise editions of the Windows client operating system. Unless the download page specifically states
that RSAT applies to a Beta or Preview or other prerelease version of Windows, you must be running a full (RTM) release of the Windows operating system to install and use RSAT. Although some users have found ways of manually cracking or hacking the RSAT MSU
to install RSAT on unsupported releases or editions of Windows, this is a violation of the Windows end-user license agreement.

This is similar to installing the adminpak.msi on Windows 2000 or Windows XP client computers. There is one major difference: in Windows Vista and Windows 7, the tools are not automatically available after
RSAT is downloaded and installed . You must enable the tools that you want to use by using the Control Panel. To do so, click
Start, click Control Panel, click Programs and then click
Turn Windows features on or off (as shown in the following figure).

However, in the RSAT releases for Windows 10, Windows 8.1, and Windows 8, tools are once again all enabled by default. You can open
Turn Windows on or off to disable tools that you don’t want to use. In RSAT for Windows 10, Windows 8.1, and Windows 8, GUI-based tools are accessed from within the Server Manager console, on the
Tools menu.

For RSAT that runs on Windows Vista and Windows 7, after running the downloaded installation package, you must enable the tools for the roles and features that you want to manage (as shown in the following figure).
You don’t need to do this for RSAT for Windows 8 or later.

If you need to install management tools in Windows Server 2008, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, or Windows Server 2016 Technical Preview for specific roles or features running on remote servers, there’s no need to install
additional software. Open the Add Features Wizard in Windows Server 2008 or Windows Server 2008 R2, or the
Add Roles and Features Wizard in Windows Server 2012 and later releases, and on the
Select Features page, expand Remote Server Administration Tools and select the tools that you want to install. Complete the wizard to install your management tools. See the following figure.

Download locations for RSAT

• Remote Server Administration Tools for Windows 10
• Remote Server Administration Tools (RSAT) for Windows 8.1
• Remote Server Administration Tools (RSAT) for Windows 8Remote
  Server Administration Tools (RSAT) for Windows 7 with SP1 (both x86 and x64)
• Remote Server Administration Tools (RSAT) for Windows Vista 32-bit (x86)
• Remote Server Administration Tools (RSAT) for Windows Vista 64-bit (x64)

RSAT for Windows 10 Platform and Tools Support Matrix

RSAT for Windows 8 and Windows 8.1 Platform and Tools Support Matrix

Reference:
KB 858830

Related topics

• Remote Server Administration Tools for Windows 10 Help
• Remote Server Administration Tools for Windows 8 and 8.1 Help
• Description of Windows Server 2008 Remote Server Administration Tools for Windows Vista Service Pack 1
• RSAT Released for Windows
  7
• Remotely
  Managing your Server Core Using RSAT
• Screencast:
  How to Install and Enable Microsoft RSAT (Remote Server Administration Tools) for Windows Vista
• Using
  MMC Snap-ins and RSAT 

Related forum threads

• Remote Server Administration Tools (RSAT)
• New
  Version of RSAT for Windows 7 RTM?
• RSAT

Набор утилит Microsoft Remote Server Administration Tools (RSAT) позволяет администраторам удаленно управлять ролями и функциями сервера Windows Server 2008 R2 с компьютера под управлением Windows 7.
Он включает в себя поддержку удаленного управления компьютерами под управлением Server Core или полноценного сервера Windows Server 2008 R2.

Установка RSAT осуществляется в 2 этапа:

1. Собственно установка дистрибутива RSAT (где его взять я уже описывал в статье о включении Windows в домен AD, на всякий случай напомню http://www.microsoft.com/downloads/details.aspx?FamilyID=7d2f6ad7-656b-4313-a005-4e344e43997d&displaylang=en)
2. Активация функций и консолей (оснасток) RSAT.

Шаг 1. Установка RSAT

wusa Windows6.1-KB958830-x86.msu /quiet (x86)
wusa Windows6.1-KB958830-x64.msu /quiet (x64)

После установки пакета RSAT, который содержит большинство необходимых администратору утилит и оснасток, они будут доступны в панели управления (Programs & Features — Windows Features).

Шаг 2. Включаем оснастки и функции RSAT

Различные функции пакета RSAT можно активировать с помощью утилиты командной строки (CLI), которая называется DISM (Deployment Image Servicing and Management), ее использование полностью аналогично процедуре включения/выключения функций и ролей в Windows Server 2008 R2 Server Core.

DISM позволяет перечислить, установить, удалить, настроить или обновить функции и пакеты в образе системы Windows. Список доступных команд зависит от того, в каком режиме работы находится система: offline или online.

Чтобы получить список всех доступных функций, наберите в командной строке:

dism /Online /Get-Features

Чтобы активировать ту или иную функцию, воспользуйтесь командой:

dism /Online /Enable-Feature /FeatureName:<FeatureName>

Например:

dism /Online /Enable-Feature:RemoteServerAdministrationTools
dism /Online /Enable-Feature:RemoteServerAdministrationTools-Roles-DHCP

Ниже я приведу полный список имен функций, доступных в RSAT

Набор утилит RSAT в Windows Server 2008 R2 и Windows 7также позволит вам осуществлять удаленное управления серверами (работающий под управлением Windows Server 2008 R2) с помощью оснастки Server Manager посредством удаленного PowerShell. Роли сервера и его функции будут доступны для управления при помощи локальных и удаленных скриптов PowerShell 2.0. Таким образом, после установки RSAT Windows 7, в вашем распоряжении появится знакомая вам консоль Server Manager.

If you are a system administrator and have lots of servers to manage in your environment, it’s always convenient to manage the servers from one location. Windows Remote Server Administrator Tools (RSAT) has been created with the same purpose in mind.

RSAT tools enable an administrator to install all the important management consoles on their own client computer and manage all the servers directly from it. The client computer may be running Windows, rather than Microsoft Server, enabling them to manage the remote servers with RSAT.

Below you will find the download links of RSAT tools for all Windows operating systems including Windows 11, Windows 10, Windows 8.1, Windows 8, and Windows 7.

Remote Server Administration Tools (RSAT)

Remote Server Administration Tools (RSAT) enables system administrators to remotely manage roles and features in Windows Server 2012 R2, Windows Server 2012, Windows Server 2008, and Windows Server 2008 R2 from a computer that is running Windows.

RSAT Compatible Versions

You cannot install RSAT on computers that are running Home or Standard editions of Windows. You can install RSAT only on Professional, Enterprise, or Education editions of the Windows client operating system.

Unless the download page specifically states that RSAT applies to a beta, preview, or other pre-release versions of Windows, you must run a full (RTM) release of the Windows operating system to install and use RSAT.

Although some users have found ways of manually cracking or hacking the RSAT .MSU files to install RSAT on unsupported versions of Windows, this is a violation of the Windows end-user license agreement.

RSAT Installation

Installing RSAT is similar to installing Adminpak.msi on Windows 2000-based or Windows XP-based client computers. However, there is one major difference: On Windows Vista and Windows 7, the tools are not automatically available after you download and install RSAT.

You must enable the tools that you want to use by using the Control Panel. To do this, open the “Programs and Features” page in the Control Panel by typing in appwiz.cpl in Run, and then click “Turn Windows features on or off” from the left.

How to Access RSAT

In the RSAT releases for Windows 11, Windows 10, Windows 8.1, and Windows 8, the tools are enabled by default. You can open “Turn Windows features on or off” to disable the tools that you don’t want to use. In RSAT for Windows 11, Windows 10, Windows 8.1, and Windows 8, you access GUI-based tools on the “Tools” menu from within the Server Manager console.

RSAT Direct Download Links

You can download the respective RSAT from the links given below, according to your operating system. You can check your operating system’s version by typing in winver in Run.

whichever OS version you are using, you can easily download and install the RSAT for your Windows from here. All the links given are official and don’t contain any virus or ads.

Windows 11

Install RSAT for Windows 11

Windows 10 (Version 1809 or Later)

Install RSAT for Windows 10 Version 1809 or later

Windows 10 (Version 1803 or Earlier)

Download RSAT for Windows 10 All Versions

Windows 8.1

Download RSAT for Windows 8.1 (32-bit + 64-bit)

Windows 8

Download RSAT for Windows 8 (32-bit + 64-bit)

Windows 7

Download RSAT for Windows 7 (32-bit + 64-bit)

Closing Words

Remote Server Administration Tools enable sysadmins to configure multiple servers remotely while using a client (Windows) operating system. This way, they do not need to get up each time a configuration needs to be made, and neither do they need to have a Server operating system installed on their own computer.

Also see:

This topic has been deleted. Only users with topic management privileges can see it.

• how to install RSAT in windows 2008 R2

  is that a separate dump to be installed or we need to add like adding role, give me a step by step installation procedure for this

  What are main feature or why this is used ?

• @RoopanKumar said:

  What are main feature or why this is used ?

  RSAT = Remote Systems Administration Tool

  It’s a tool for managing other servers without logging into them directly. It’s the standard tool for all Windows Server administration (along with PowerShell, of course.)

  You are expected (but not required) to install this on your desktop, not on a server. Why do you want it on a server?

• @scottalanmiller one of my senior said if it is installed then only we can open share drive in a network even it is in different subnet or ip class or ip segment

• @RoopanKumar said:

  @scottalanmiller one of my senior said if it is installed then only we can open share drive in a network even it is in different subnet or ip class or ip segment

  This really makes no sense. RSAT is a set of administration tools, it doesn’t facilitate connectivity to any other resources a normal workstation wouldn’t have access to.

• @RoopanKumar said:

  @scottalanmiller one of my senior said if it is installed then only we can open share drive in a network even it is in different subnet or ip class or ip segment

  That’s not in any way what the RSAT does. He sounds like he is very confused.

• RSAT does not exist for servers, only for desktops. Here is the version for Windows 7 and Server 2008 R2:

  Windows 7 RSAT Download

• @scottalanmiller he is asking me to install in server 2008 what can i tell him

  give me some article so that i will wake him from that

• @Rob-Dunn so what can be done for that kind of connection
  suggest me if you have any idea over that issue

• @RoopanKumar said:

  @scottalanmiller he is asking me to install in server 2008 what can i tell him

  Tell him that he’s completely misunderstood the technology and his request makes no sense and can’t do what he wants it to do.

• @RoopanKumar said:

  give me some article so that i will wake him from that

  Just install RSAT on Windows 7 and show it to him. Anyone who has seen it would know immediately that it is the wrong thing.

  Imagine if he told you to buy a hammer because he thinks its a pizza. Just show him the hammer, you only have to see it to know that it isn’t a pizza.

• @RoopanKumar said:

  @scottalanmiller he is asking me to install in server 2008 what can i tell him

  give me some article so that i will wake him from that

  Perhaps you should ask him, RSAT — you mean Remote Server Administration Tools? Why would I need to install DNS manager, ADDC Manager, etc on the server, isn’t it already there, assuming it’s a DC.

• @RoopanKumar said:

  @Rob-Dunn so what can be done for that kind of connection
  suggest me if you have any idea over that issue

  Nothing is needed. What he’s asking for is «just how things work.» He’s asking for a special tool for something that should already be doing what he wants. There is no tool for what you want because no tool is needed.

• @RoopanKumar said:

  @scottalanmiller one of my senior said if it is installed then only we can open share drive in a network even it is in different subnet or ip class or ip segment

  The thing keeping people/devices from opening shares is share permissions and network paths.

  You edit your share name and set access for those you want to allow it.

  Network path — well if your network traffic can’t make it to the computer in question, you definitely can’t connect to the share.

• The real thing needed here is to work on goals. This is called being caught in the weeds. Your boss or senior person is stuck on an imagined solution that he doesn’t understand. He shouldn’t be asking you to install RSAT when he has no idea what it is or where to install it (is 2008 R2 even the right version? RSAT is version specifical, RSAT on 2008 R2 won’t work with 2012 or 2012 R2 or 2016 for example) but rather he should tell you the goal and have you solve the problem.

• I wonder if your senior thinks you need some tool inside RSAT to set permissions on that share remotely.

  Psst you don’t.

  You can run Computer Manager as a domain admin on your local Windows client, then change the computer to attach to a server instead of the local machine.

  

  Once you’re connected to the remote server, open up the shared folder option in the list and go from there.

• Sounds like all you need is a competent IT department.

• the MMCs that RSAT uses are already on the servers you can enable them through the feature/role add wizard without enabling the role itself.

• @scottalanmiller said:

  @RoopanKumar said:

  @Rob-Dunn so what can be done for that kind of connection
  suggest me if you have any idea over that issue

  Nothing is needed. What he’s asking for is «just how things work.» He’s asking for a special tool for something that should already be doing what he wants. There is no tool for what you want because no tool is needed.

  Well proper routing might be needed and since he’s this incompetent maybe routing isn’t setup right. polish your resume and get another job.

• @Dashrender said:

  @RoopanKumar said:

  @scottalanmiller one of my senior said if it is installed then only we can open share drive in a network even it is in different subnet or ip class or ip segment

  The thing keeping people/devices from opening shares is share permissions and network paths.

  You edit your share name and set access for those you want to allow it.

  Network path — well if your network traffic can’t make it to the computer in question, you definitely can’t connect to the share.

  You can edit share permissions from the «Computer Management» MMC but that isn’t even a RSAT MMC. If he’s saying the issue is it’s on another subnet it’s likely a routing or firewall issue.

• @Jason said:

  Well proper routing might be needed and since he’s this incompetent maybe routing isn’t setup right. polish your resume and get another job.

  While this is an isolated incident, @jason is right. You are dealing with someone who is missing very basic things. Things that a Windows entry level person would be expected to know. And while it is fine to miss things (maybe Windows isn’t his background) he’s missing «common use cases» on top of not knowing «standard entry level technology» and then «not understanding how to approach a problem» and using years out of date technology, too.

  It’s about four big red flags in a single incident. It’s a situation where, for your own good, you want to question how good of a manager or mentor this person is for you. Are you likely to learn from them? Or find that they hold you back from learning and growing in your own career.

This topic has been deleted. Only users with topic management privileges can see it.

• how to install RSAT in windows 2008 R2

  is that a separate dump to be installed or we need to add like adding role, give me a step by step installation procedure for this

  What are main feature or why this is used ?

• @RoopanKumar said:

  What are main feature or why this is used ?

  RSAT = Remote Systems Administration Tool

  It’s a tool for managing other servers without logging into them directly. It’s the standard tool for all Windows Server administration (along with PowerShell, of course.)

  You are expected (but not required) to install this on your desktop, not on a server. Why do you want it on a server?

• @scottalanmiller one of my senior said if it is installed then only we can open share drive in a network even it is in different subnet or ip class or ip segment

• @RoopanKumar said:

  @scottalanmiller one of my senior said if it is installed then only we can open share drive in a network even it is in different subnet or ip class or ip segment

  This really makes no sense. RSAT is a set of administration tools, it doesn’t facilitate connectivity to any other resources a normal workstation wouldn’t have access to.

• @RoopanKumar said:

  @scottalanmiller one of my senior said if it is installed then only we can open share drive in a network even it is in different subnet or ip class or ip segment

  That’s not in any way what the RSAT does. He sounds like he is very confused.

• RSAT does not exist for servers, only for desktops. Here is the version for Windows 7 and Server 2008 R2:

  Windows 7 RSAT Download

• @scottalanmiller he is asking me to install in server 2008 what can i tell him

  give me some article so that i will wake him from that

• @Rob-Dunn so what can be done for that kind of connection
  suggest me if you have any idea over that issue

• @RoopanKumar said:

  @scottalanmiller he is asking me to install in server 2008 what can i tell him

  Tell him that he’s completely misunderstood the technology and his request makes no sense and can’t do what he wants it to do.

• @RoopanKumar said:

  give me some article so that i will wake him from that

  Just install RSAT on Windows 7 and show it to him. Anyone who has seen it would know immediately that it is the wrong thing.

  Imagine if he told you to buy a hammer because he thinks its a pizza. Just show him the hammer, you only have to see it to know that it isn’t a pizza.

• @RoopanKumar said:

  @scottalanmiller he is asking me to install in server 2008 what can i tell him

  give me some article so that i will wake him from that

  Perhaps you should ask him, RSAT — you mean Remote Server Administration Tools? Why would I need to install DNS manager, ADDC Manager, etc on the server, isn’t it already there, assuming it’s a DC.

• @RoopanKumar said:

  @Rob-Dunn so what can be done for that kind of connection
  suggest me if you have any idea over that issue

  Nothing is needed. What he’s asking for is «just how things work.» He’s asking for a special tool for something that should already be doing what he wants. There is no tool for what you want because no tool is needed.

• @RoopanKumar said:

  @scottalanmiller one of my senior said if it is installed then only we can open share drive in a network even it is in different subnet or ip class or ip segment

  The thing keeping people/devices from opening shares is share permissions and network paths.

  You edit your share name and set access for those you want to allow it.

  Network path — well if your network traffic can’t make it to the computer in question, you definitely can’t connect to the share.

• The real thing needed here is to work on goals. This is called being caught in the weeds. Your boss or senior person is stuck on an imagined solution that he doesn’t understand. He shouldn’t be asking you to install RSAT when he has no idea what it is or where to install it (is 2008 R2 even the right version? RSAT is version specifical, RSAT on 2008 R2 won’t work with 2012 or 2012 R2 or 2016 for example) but rather he should tell you the goal and have you solve the problem.

• I wonder if your senior thinks you need some tool inside RSAT to set permissions on that share remotely.

  Psst you don’t.

  You can run Computer Manager as a domain admin on your local Windows client, then change the computer to attach to a server instead of the local machine.

  

  Once you’re connected to the remote server, open up the shared folder option in the list and go from there.

• Sounds like all you need is a competent IT department.

• the MMCs that RSAT uses are already on the servers you can enable them through the feature/role add wizard without enabling the role itself.

• @scottalanmiller said:

  @RoopanKumar said:

  @Rob-Dunn so what can be done for that kind of connection
  suggest me if you have any idea over that issue

  Nothing is needed. What he’s asking for is «just how things work.» He’s asking for a special tool for something that should already be doing what he wants. There is no tool for what you want because no tool is needed.

  Well proper routing might be needed and since he’s this incompetent maybe routing isn’t setup right. polish your resume and get another job.

• @Dashrender said:

  @RoopanKumar said:

  @scottalanmiller one of my senior said if it is installed then only we can open share drive in a network even it is in different subnet or ip class or ip segment

  The thing keeping people/devices from opening shares is share permissions and network paths.

  You edit your share name and set access for those you want to allow it.

  Network path — well if your network traffic can’t make it to the computer in question, you definitely can’t connect to the share.

  You can edit share permissions from the «Computer Management» MMC but that isn’t even a RSAT MMC. If he’s saying the issue is it’s on another subnet it’s likely a routing or firewall issue.

• @Jason said:

  Well proper routing might be needed and since he’s this incompetent maybe routing isn’t setup right. polish your resume and get another job.

  While this is an isolated incident, @jason is right. You are dealing with someone who is missing very basic things. Things that a Windows entry level person would be expected to know. And while it is fine to miss things (maybe Windows isn’t his background) he’s missing «common use cases» on top of not knowing «standard entry level technology» and then «not understanding how to approach a problem» and using years out of date technology, too.

  It’s about four big red flags in a single incident. It’s a situation where, for your own good, you want to question how good of a manager or mentor this person is for you. Are you likely to learn from them? Or find that they hold you back from learning and growing in your own career.