Select your operating system.
- Windows
- Mac OS
This software update program is for the customer-owned product listed above (the “affected product”), and is provided only on acceptance of the agreement listed below. By selecting “Accept” and clicking “Download”, you are held to have accepted the terms and conditions of the agreement. Be sure you understand the terms of the agreement before beginning download.
-
About the Wireless Transmitter Utility
-
Use the Wireless Transmitter Utility to adjust network settings and the like for WT-7, WT-6, WT-5, and WT-4 wireless transmitters, UT-1 communications units, and cameras with built-in Wi-Fi and/or Ethernet. The software for the WT-4 was called the WT-4 Setup Utility, but now that it supports the WT-5 and other devices the name has been changed to Wireless Transmitter Utility.
- Notices
-
- • This software is for users of WT-7, WT-6, WT-5, and WT-4 wireless transmitters, UT-1 wireless communications units, and cameras with built-in Wi-Fi and/or Ethernet.
- • Before beginning installation, exit the Wireless Transmitter Utility and all other applications, including any anti-virus software.
- • When performing the update, log in to an account with administrator privileges.
- • The software does not support the following WT-4 modes: Thumbnail select mode and Print mode.
- • Windows security prompts will be displayed two or three times during installation. Click Install to proceed.
- • Installing the Wireless Transmitter Utility uninstalls the WT-4 Setup Utility.
- • Users will need to redo the following network profiles (camera network settings) after upgrading from the WT-4 Setup Utility or Wireless Transmitter Utility version 1.3.0:
- — Image transfer or Camera control mode profiles for D4 cameras connected via Ethernet or WT-5 wireless transmitters
- — Profiles for the WT-4 (Transfer mode and ftp upload profiles excepted)
- • Computers may be unable to pair with the camera while connected to a LAN. This can be resolved by disconnecting the computer from the LAN.
- • Users of Camera Control Pro 2 will need to upgrade to Camera Control Pro 2 version 2.35.1 or later.
- • Users of NX Tether will need to upgrade to NX Tether version 1.0.3 or later.
- • Read the information below before proceeding.
- Product Description
-
Name Wireless Transmitter Utility Version 1.9.8 File name S-WTU___-010908WF-ALLIN-ALL___.exe Copyright Nikon Corporation Archive type Self-extracting Reproduction Not permitted System requirements
Operating system - Microsoft Windows 11
- Microsoft Windows 10
Note: Pre-installed 64-bit editions only.
CPU Intel Celeron, Pentium 4, or Core series, 1.6 GHz or better RAM 1 GB or more (2 GB or more recommended) Hard disk space A minimum of 500 MB available on the start-up disk (1 GB or more recommended) Monitor - Resolution: 1024 × 768 pixels (XGA) or more (1280 × 1024/SXGA or more recommended)
- Colors: 24-bit color (True Color) or more
Supported devices - Z 9, Z 7, Z 7II, Z 6, Z 6II, Z 5, Z fc, Z 50, Z 30, and D780 cameras (compatible with built-in camera Wi-Fi)
- D6 cameras (compatible with built-in camera Wi-Fi and Ethernet)
- D5, D4S and D4 cameras (compatible with built-in camera Ethernet)
- WT-7 wireless transmitters (compatible with Z 7, Z 7II, Z 6, Z 6II, D850, D810, D810A, D780, D750, D500 and D7200 cameras)
- WT-6 wireless transmitters (compatible with D6 and D5 cameras)
- WT-5 wireless transmitters (compatible with D5, D4S and D4 cameras)
- WT-4 wireless transmitters (compatible with D4S, D4, D3X, D3S, D3, D800, D800E, D700, D300S, D300, and D7000 cameras)
- UT-1 communication units (with or without WT-5, compatible with D4S, D4, D810, D810A, D800, D800E, D750, D7200, D7100, and D7000 cameras)
Notes - Windows 10: Ad-hoc mode wireless connections are not supported.
- Using the WT-4 with Windows 11: Under Windows 11, transfer using the WT-4 may be interrupted before Nikon Transfer 2 has finished copying all pictures to the computer. You may still be able to copy pictures twenty or thirty at a time.
- Changes from Version 1.9.7 to 1.9.8
-
- • Added support for Z 9 firmware version 3.00.
- • Ended support for Windows 8.1.
- • Ended use of virtual buses.
- Cautions for Users of the UT-1
-
- • When a UT-1 is connected to a D4 or D7000 camera, the software will in addition to the Transfer mode and PC mode options display Thumbnail select mode and Print mode options, but latter-named two options cannot be used.
- • When using the Wireless Transmitter Utility to configure connection settings for a D4S, D4, or D7000, be sure to select WT-4/UT-1 (functions as WT-4) when prompted to select hardware.
- • When using the Wireless Transmitter Utility to configure connection settings for a D7100 or D800/D800E (firmware versions A 1.10/B 1.10), be sure to select Wired LAN when prompted to select hardware. If you are using a UT-1 with a WT-5 wireless transmitter, select WT-5 (wireless LAN).
- • When using a D4S or D4 with the UT-1, select WT-4 for Network > Choose hardware in the camera SETUP MENU.
- Transferring Movies Recorded with a D4S, D4, D3S, D800, D800E, D300S, or D7000 (WT-4)
-
Movie transfer is supported in the following modes:
• D3S and D300S: Transfer mode
• D4S, D4, D800, D800E, and D7000: Transfer mode and PC modebut note that the Auto send and Send folder options are not supported in Transfer mode.
Follow the steps below to transfer movies in Transfer mode.
- Connect in Transfer mode.
- Select a movie in full-frame or thumbnail playback.
- Select the movie for transfer as described below. Upload will begin immediately.
• D4S and D4: Keeping the OK button pressed, press the center of the multi selector.
• D3S: Keeping the thumbnail/playback zoom button pressed, press the center of the multi selector.
• D800, D800E, and D300S: Press the OK button on the camera.
• D7000: Keeping the BKT button pressed, press the OK button.
- Installation
-
- Create a folder on the hard disk and name it as desired.
- Download the software to the folder created in Step 1.
- Run the software to launch the installer.
- Follow the on-screen instructions to complete installation.
- User’s Manual
-
- We recommend you read the manual to understand the software basic operations before starting. For your convenience, this manual is also linked from the Help menu in the software.
- Wireless Transmitter Utility Help
Agreement
Accept
- Download
-
Download (64-bit edition)
S-WTU___-010908WF-ALLIN-ALL___.exe
(Approx. 74.85 MB)
-
Download (64-bit edition)
S-WTU___-010908WF-ALLIN-ALL___.exe
(Approx. 74.85 MB)
-
Download (64-bit edition)
S-WTU___-010908WF-ALLIN-ALL___.exe
(Approx. 74.85 MB)
-
Download (64-bit edition)
S-WTU___-010908WF-ALLIN-ALL___.exe
(Approx. 74.85 MB)
-
Download (64-bit edition)
S-WTU___-010908WF-ALLIN-ALL___.exe
(Approx. 74.85 MB)
✔ What’s Cool
1. The Wireless Mobile Utility connects your iPhone, iPad, or iPod touch to Nikon digital cameras wirelessly (via Wi-Fi), letting you download photos, take pictures remotely, and share them hassle-free via e-mail or upload to social networking sites.
Software Screenshots
Download and install Wireless Mobile Utility on your computer
Hurray! Seems an app like wireless is available for Windows! Download below:
| SN | App | Download | Review | Maker |
|---|---|---|---|---|
| 1. | Wireless Tether for Olympus
|
Download | /5 0 Reviews |
John Li |
| 2. | Camera Wireless for Nikon
|
Download | 3.2/5 82 Reviews 3.2 |
Duis Consulting |
| 3. | HP Lap Dock Wireless Settings
|
Download
|
3.4/5 10 Reviews 3.4 |
HP Inc. |
Not satisfied? Check for compatible PC Apps or Alternatives
Or follow the guide below to use on PC:
Select Windows version:
- Windows 7-10
- Windows 11
Learn how to install and use the Wireless Mobile Utility app on your PC or Mac in 4 simple steps below:
- Download an Android emulator for PC and Mac:
Get either Bluestacks or the Nox App >> . We recommend Bluestacks because you can easily find solutions online if you run into problems while using it. Download Bluestacks Pc or Mac software Here >> . - Install the emulator on your PC or Mac:
On your computer, goto the Downloads folder » click to install Bluestacks.exe or Nox.exe » Accept the License Agreements » Follow the on-screen prompts to complete installation. - Using Wireless on PC [Windows 7/ 8/8.1/ 10/ 11]:
- Open the Emulator app you installed » goto its search bar and search «Wireless»
- The search will reveal the Wireless Mobile Utility app icon. Open, then click «Install».
- Once Wireless is downloaded inside the emulator, locate/click the «All apps» icon to access a page containing all your installed applications including Wireless.
- Now enjoy Wireless on PC.
- Using Wireless on Mac OS:
Install Wireless Mobile Utility on your Mac using the same steps for Windows OS above.
Need help? contact us here →
How to download and install Wireless on Windows 11
To use Wireless mobile app on Windows 11, install the Amazon Appstore. This enables you browse and install android apps from a curated catalog. Here’s how:
- Check device compatibility
- RAM: 8GB (minimum), 16GB (recommended)
- Storage: SSD
- Processor: Intel Core i3 8th Gen (minimum), AMD Ryzen 3000 (minimum) or Qualcomm Snapdragon 8c (minimum)
- Processor architecture: x64 or ARM64
- Check if there’s a native Wireless Windows app ». If none, proceed to next step.
- Install the Amazon-Appstore ».
- Click on «Get» to begin installation. It also automatically installs Windows Subsystem for Android.
- After installation, Goto Windows Start Menu or Apps list » Open the Amazon Appstore » Login (with Amazon account)
- Install Wireless on Windows 11:
- After login, search «Wireless» in search bar. On the results page, open and install Wireless Mobile Utility.
- After installing, Goto Start menu » Recommended section » Wireless. OR Goto Start menu » «All apps».
Wireless Mobile Utility On iTunes
| Download | Developer | Rating | Score | Current version | Adult Ranking |
|---|---|---|---|---|---|
| Free On iTunes | Nikon Corporation | 1809 | 1.81868 | 1.6.2 | 4+ |
Download on Android
Download Android
Thank you for reading this tutorial. Have a nice day!
Software Features and Description
The this app Mobile Utility connects your iPhone, iPad, or iPod touch to Nikon digital cameras wirelessly (via Wi-Fi), letting you download photos, take pictures remotely, and share them hassle-free via e-mail or upload to social networking sites.
•Principal Features
-View the scene through the camera lens live in Wireless window.
-Establish a this app connection and take pictures with the camera or remotely from the iOS device (see note).
-Automatically add new pictures to the camera roll.
-View existing pictures remotely and add selected photos to the camera roll.
-Pass photos to other apps via iOS file-sharing and share them hassle-free.
-Add location data from the iOS device to pictures during upload.
-Control optical zoom on COOLPIX cameras (see note).
-Make pictures brighter or darker with the live view window (see note).
-Use the camera to select pictures for download before connecting (see note).
-Take pictures with the self-timer.
-Synchronize the camera clock with iOS devices.
•Cautions
— Cannot be operated with a SnapBridge-compatible camera.
-Note: The features available vary with the camera. See the camera manual or the link below for details.
-Wireless may not recognize photos taken with non-supported cameras.
-Wireless can not be used to download movies or record movies remotely.
-Download of Motion Snapshots is restricted to the photograph portion only.
-Only one camera can be connected at a time.
-Performance varies with network and local conditions.
•User’s Manual
For more information, see Wireless manual, which can be downloaded from the following URL:
http://nikonimglib.com/ManDL/WMAU-ios/
•Terms of Use
Before using Wireless , download and read the End User License Agreement, available at the following URL:
http://nikonimglib.com/eula/WMAU-ios/
Supported Digital Cameras as of December 2016
Requires a camera with built-in this app LAN or support for the WU-1a/b this app mobile adapter.
The S800c and S810c are not supported.
D610, D600, D750, D7200, D7100, D3300, D3200, D5500, D5300, D5200, Df
Nikon 1 V3, V2, J5, J4, J3, S2, S1, AW1
COOLPIX S7000, S6900, S6800, S6600, S6500, S9900(s), S9700(s), S9600, S9500, S5300, S5200, S3700, L840, P520, P330, P7800, P900(s), P610(s), P600, P530, P340, COOLPIX A, AW130(s), AW120(s), AW110, AW110s,
iOS Device System Requirements
iOS10.3, iOS11.4, iOS12.2
There is no guarantee that Wireless will run on all devices.
•Trademark Information
iPad, iPhone, and iPod touch are trademarks or registered trademarks of Apple Inc. in the United States and/or other countries. All other trade names mentioned in this document are the trademarks or registered trademarks of their respective holders.
Top Pcmac Reviews
-
Unreliable connectivity and extreme lag
By Devvvvvvvvvvvvv (Pcmac user)
It’s virtually impossible to take a photo with this, and I think it’s because this app is a disaster. When it finally does connect, you’ll be able to take one or two photos with 30 seconds to two minutes of lag between for the live view to update to what you’re actually photographing. Usually, after about 2 to 3 photos, it will lose its connection, you’ll have to go back into your Wi-Fi settings and find the device again to reconnect it. Then, if you’re lucky, you will actually find a connection again in the app. Most of the time using this is spent waiting for the live view to update or fixing a lost connection to your Wi-Fi settings. When it is actually connected, it’s so laggy that the live view can sometimes not update for longer than a minute or more—if at all.
I actually sent my WU-1a remote back to Nikon to have it checked because I was unable to get a connection for long periods of time when I needed it. They sent the device back saying that I has no issues. So, it must be the app.
I was trying to use it again today after a year or so of forgetting about it (because when I did try to use it in the past, I was unable to actually get it to do what I needed). Today, I was able to get to it take two photos before it disconnected again. I came to search for an app update, because I thought “it must have been updated within the last year due to the bugs and issues making it impossible to use“. Surprise, no update!!
-
Lousy app & issues. Does Nikon even read these???
By Mzbehavn (Pcmac user)
This app is such a disappointment. I have the Coolpix p900, which I love, but this app is practically useless. And since the latest updates, both Apple iOS & Nikon WMU, it’s even worse.
The app itself lacks many features that I would think should be easy & obvious: “select all” should allow you to select all the pictures not just clear all the ones I checked by hand. How about the ability to download videos to my iPhone and/or iPad? As it is, I either have to download to pc & Dropbox to my iPad or I need an Apple lighting plug to card reader.
More often than not, I can’t download more than 10 pics before I get “Camera Disconnected”, yet many times my iPad shows that it is still connected to the camera but the app shows the WiFi connection is gone requiring a reboot of the camera & app. Other times the camera does disconnect & still other times the camera actually powers off. Also, since the recent update many photos show as a gray box with a red X in the app. But sometimes, if I exit & come back, they’ll now be available. And worse, the app will just stop during downloading, leaving me to figure out which photos did actually download & which ones I need to try again. Except it does the same thing all over again.
Please, Nikon, please, you are better than this or at least you can be. Fix these issues & upgrade this app to make it useful. -
My experience WMU
By Alberghinib (Pcmac user)
I have both an older iPad mini and an iPhone 6 and have used WMU on both for over a year.
The concerns over connecting and disconnecting during use seem to be not an issue with WMU but rather with how the iOS wifi works. I attempted to use my WMU during graduation at Radio City Music hall. I could connect to the WMU but not for long. The next day while at home I tried again and it worked flawlessly. This morning again after a huge party last night the connection was fantastic. It quickly showed me all 177 images on my D7100 and transferred quickly 4 full sized files to my iPad mini.
The difference in usability seems to be that when used in an area with numerous wifi connections available the WMU has a hard time staying connected. Even in airplane mode my iPhone wanted to grab the best «internet» wifi connection and I believe is the reason the WMU had difficulties in Radio City Music Hall.
So if you are in an area with limited this app connections available the WMU should work great. Use it in a very public area with lots of wifi connections and it may struggle. -
Missing a LOT of features.
By UtopiaOrOblivion (Pcmac user)
Camera: D3300 (with WU-1a adapter)
Phone: iPhone SE (same chipset as the 6S, iOS 10.3.3)
Boy, this app is a pain to use. It’s missing a number of potential features purely due to Nikon’a lack of trying.
First, the connection does get wonky sometimes. I’ve found the app locks up often, especially if you’re moving the camera around frequently. But when it works, it does work (and why I didn’t give it one star).
Cons:
— The photos downloaded from the camera directly to the iPhone’s camera roll are NOT the RAW files, despite being «Full Size». Even if you don’t shoot in JPEG, the app will compress the RAW file to one before saving it. Major drawback, especially with the power of mobile devices, suite of mobile software, and amount of mobile storage these days.
— No video. I understand from a technical standpoint why they don’t allow video recording LIVE (bandwidth)—however, an option to set up the camera using the phone as the viewfinder and then being able to at least trigger a recording (app view could go black during) would be nice and easy to implement. For cameras without swiveling screens, it would be an invaluable feature when you’re not able to be behind the camera itself.
— The self timer is VERY limited, only to a few seconds. It should be totally user definable. Second, it freaking resets after each time you take a shot. Bad shot and want to quickly retake? Too bad, you have to open and reset it again. Really dumb oversight.
Nikon Transfer – представляет собой официальное программное обеспечение от компании Nikon, которое будет крайне полезно для всех владельцев цифровых фотоаппаратов данных моделей. С помощью софта пользователи смогут быстро и безопасно копировать все снимки с фотоаппарата, сохраняя их напрямую на своем персональном компьютере.
Особенно стоит отметить наличие уникальной функции резервного копирования, где можно будет за раз сразу выбрать две папки сохранения фотографий. Данный способ очень удобен и практичен, так как сильно экономит время юзеров, избавляя их от лишних действий.
Скачать бесплатно Nikon Transfer 2.10.3 x32
Скачать бесплатно Nikon Transfer 2.10.3 x64
Так же еще одной полезной функцией утилиты является возможность добавления сторонней информации к перемещаемым файловым компонентам. Можно будет сразу указать все нужные данные о снимках, чтобы не прибегать к использованию аналогичных инструментов.
Преимущества приложения:
- Максимально упрощенный режим работы;
- Возможность резервного копирования файлов;
- Редактирование информации снимков;
- Перемещение фотографий сразу в два источника;
Скачать бесплатно данную утилиту вы сможете на нашем портале, открыв ссылку, которая закреплена на активной странице.
Аналоги программы вы всегда можете найти в наших подборках:
- Article ID 000006469
- Date Published 19/10/2016
- Date Last Updated 12/11/2021
Фотокамеры, совместимые с приложением Wireless Mobile Utility
Приложение Wireless Mobile Utility (WMU) позволяет устанавливать беспроводное подключение интеллектуального устройства к выбранным цифровым фотокамерам Nikon (через Wi-Fi) для загрузки снимков и дистанционного управления съемкой, а также для передачи изображений по электронной почте или загрузки в социальные сети. Приложение WMU совместимо с фотокамерами, перечисленными в таблицах, приведенных ниже. Более поздние модели фотокамер совместимы с приложением SnapBridge, заменившим WMU с весны 2016 года. Фотокамеры, поддерживающие WMU, не поддерживают SnapBridge и наоборот.
Подключение фотокамеры к Wireless Mobile Utility через Wi-Fi
Для обеспечения совместимости с приложением WMU фотокамер более старых моделей требовались адаптеры для беспроводного подключения WU-1a или WU-1b. Эти две модели адаптеров отличаются типом разъема USB, использующегося для физического подключения к фотокамере (см. ниже). Более новые модели фотокамер оснащены встроенным модулем Wi-Fi и поэтому не нуждаются в использовании адаптера для беспроводного подключения.
| Фотокамеры, подключаемые к WMU с помощью дополнительных адаптеров для беспроводного подключения WU-1a и WU-1b | |
|
Адаптер для беспроводного подключения WU-1a |
 |
| Адаптер для беспроводного подключения WU-1b D610 D600 Nikon 1 V2 Nikon 1 S1 Nikon 1 J3 Nikon 1 AW1 |
 |
| Фотокамеры, подключаемые к WMU с помощью встроенного модуля Wi-Fi | |
| Цифровые зеркальные фотокамеры | D7200*1, D5500*1, D5300*1, D750*1 |
| Nikon 1 | J4, J5*1, V3 |
| COOLPIX AW | AW130*1, AW120, AW110 |
| COOLPIX L | L840 |
| COOLPIX P | P610, P600, P340, P900*1 |
| COOLPIX S | S9900, S9700, S9600, S9500, S7000*1, S6900, S6800, S6600, S6500, S5300, S5200, S3700*1 |
Поддержка по продуктам
Загрузить приложение на интеллектуальное устройство можно из магазина Google Play (для устройств Android) или App Store (для устройств Apple), введя в строке поиска «Wireless Mobile Utility». Перед установкой прочтите описание приложения и убедитесь в его совместимости с системой.
Установить подключение по беспроводной сети Wi-Fi очень просто, но последовательность действий зависит от используемой модели фотокамеры и интеллектуального устройства. В первую очередь воспользуйтесь инструкциями, приведенными в руководстве пользователя фотокамеры. Если потребуются дополнительные сведения, обратитесь к руководству по применению утилиты Wireless Mobile Adapter Utility или руководству пользователя интеллектуального устройства.
Руководство по применению утилиты Wireless Mobile Utility в формате PDF
Android: http://nikonimglib.com/ManDL/WMAU
iOS: http://nikonimglib.com/ManDL/WMAU-ios
*1 Пожалуйста, обратитесь к этой статье для получения дополнительной информации.
Previously viewed answers
Skip to Contact