Windows installation encountered an unexpected error verify that the installation sources

Question

Issue: How to fix Access Violation error 0xC0000005 on Windows?

Hello, for some reason, installation of apps is interrupted by a following message: “Windows installation encountered an unexpected error. Verify that the install sources are accessible, and restart installation.” Error code: 0xC0000005. Sometimes this message shows up out of nowhere when I’m browsing or doing other installation non-related tasks. What could this be? Please help!

Solved Answer

Windows is an intricate system, which is performing multiple tasks once activated. Therefore, all constituent parts of the OS have to work flawlessly. If, for some reason, one of the parts exits the formations, the system may start reporting about malfunctions by slowing down, freezing, or bringing up error messages. Error code 0xC0000005, also known as Access Violation Error, is one of them.

0xC0000005 is a relatively rare but broad error, as it might even prevent users from using the most common Windows functions, such as preventing audio from being played or being unable to access Control Panel. Without a doubt, such scenarios can significantly reduce user experience, hence the need to perform 0xC0000005 fix as soon as possible.

There are a few different instances of the issue. The 0xC0000005 pop-up indicates the following information:

Windows installation encountered an unexpected error. Verify that the install sources are accessible, and restart installation

Error code: 0xC0000005

The application was unable to start correctly (0xc0000005). Click OK to close the application

It is stated that 0xC0000005 error usually occurs when a particular application is trying to access memory, which is no longer available or can’t be accessed for some reason. As a consequence, the connection cannot be created, and the system cannot perform a required task.

Fix Access Violation error 0xC0000005 on Windows

The system malfunction that causes 0xC0000005 error may be related to corrupted registry entries,^[1] corrupted/outdated drivers, virus infection, incomplete/missing security updates, and similar issues. Thus, since the actual cause of the 0xC0000005 error is not clear, you should try all fixes provided below.

Note, before you try to fix 0xC0000005 manually, we suggest you try to solve the issue automatically with the help of a repair tool ReimageMac Washing Machine X9 – it is designed to find a root cause of the problem and fix it within a scan. This is especially beneficial for less IT-savvy users.

Fix 1. Check the system for malware

In general, it’s advisable to check the system with a professional malware removal tool regularly. A full system scan is also a must when your PC encounters a system error, such as 0xC0000005, because viruses are by far the most common error pop-up and BSOD^[2] causes. Thus, activate the anti-virus that is running on your PC and let it check the system thoroughly.

There are many free third-party applications that offer you trial versions, so a scan with these tools should suffice, although you should make sure that the provider is reputable – there are plenty of fake anti-malware tools that act like malware themselves instead of guarding users. However, the built-in Windows Defender (known as Microsoft Defender as of recently) is more than sufficient to ensure that no malware is involved. The tool has been tested by various independent parties and proved to be just as good as third-party providers, as is ranked as a top product on multiple occasions.^[3]

• In Windows search, type Security and click on Windows Security
• Select Virus & Threat protection
• Choose Scan options
• Click on Full scan and then pick Scan now

  Scan computer for malware

Fix 2. Run Registry Editor

If malware scan did not help, follow these steps:

• Press Win key + R, type regedit, and press Enter
• When the Registry Editor opens, navigate to the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Windows

  Use registry editor

• Click LoadAppInit_DLLs and change its value from 1 to 0
• To confirm the changes, click OK
• Restart your PC and try to run the application that you couldn’t open before. If the error is gone, you don’t need to perform the next fix. If, however, 0xC0000005 still emerges, try the following fix.

Fix 3. Check the drivers

• Type Device Manager into Windows search and press Enter
• When the Device Manager opens, check for malfunctioning drivers on the left pane. For this purpose, go through each device and check for the drivers marked with a yellow exclamation mark
• In case there are no such drivers, it means that all of them are working properly. If, nevertheless, some of them are malfunctioning, right-click on them and select Properties
• After that, click on Update Drivers and pick Search automatically for updated driver software

  Update drivers

• Don’t forget to reboot the system when it’s done

Fix 4. Run SFC scan

System File Checker is an excellent built-in tool that can help users diagnose and repair system file-related errors. To run SFC scan, you should access Command Prompt with administrator’s rights:

• In Windows search, type in cmd
• Right-click on Command Prompt result and select Run as administrator
• Once Command Prompt window opens, type in the following command and press Enter:
  

  sfc /scannow

• Wait for scan to finish – Windows will report the findings and attempt to fix issues automatically

  Run SFC scan via Command Prompt

Fix 5. Use System Restore

This option will return your computer state to a previous point of time and you will not lose any personal files, although some apps might disappear so you will have to reinstall them.

• Press Win + R simultaneously
• Type in rstrui.exe and press Enter
• Click Next
• Select a restore point with a know good system configuration
• Click Next and press Finish

  Use System Restore

Fix 6. Reset your PC

If none of the above methods help, you should reset your Windows. You will lose all the installed applications, although files will remain intact:

• Right-click on Start button and select Settings
• Pick Update & Security from the list and access Recovery panel
• In the Reset This PC section, click Get Started

  

• Select Keep my files
• Proceed with on-screen instructions

Repair your Errors automatically

ugetfix.com team is trying to do its best to help users find the best solutions for eliminating their errors. If you don’t want to struggle with manual repair techniques, please use the automatic software. All recommended products have been tested and approved by our professionals. Tools that you can use to fix your error are listed bellow:

If you are struggling with the Windows Error Code 0xc0000005 PC problem, then today we will show you how to completely fix and solve this error problem.

This shows an error code message like,

Error Code: 0xc0000005 Windows installation encountered an unexpected Error 0xc0000005. Verify that installation sources are accessible & restart the installation.

Error Code 0xc0000005

This error is mostly founded in Windows PC users. This error problem occurs when you try to open any internet browser. It is a critical windows error code. It also happens when you are trying to install Windows on your hard drive. This Error 0xc0000005 may also occur when you try to attempt to use programs with the Windows O.S.

Causes of Windows Error Code 0xc0000005 Issue:

• Windows 10 installation error issue
• Windows installation encountered an unexpected error
• Verify that the installation sources
• This application was unable to start correctly

Here are some of the top best solutions for easily fixing and solving this type of Windows Error Code 0xc0000005 PC problem from you permanently.

How to Fix Windows Error Code 0xc0000005 Issue

1. Fix Faulty Drivers on your Windows PC –

• Go to the Start Menu
• Click on Control Panel
• Go to the Device Manager
• Go to the drivers which you want to fix
• Right-click on that driver
• Click on “Update Driver Software” there
• That’s it, done

By fixing the faulty drivers, it can fix your Error Code 0xc0000005 Windows 10 problem.

2. Fix Virus/Malware Problems from the Antivirus on your Windows PC –

• Go to your Antivirus program or Windows Defender
• Check that if there is any problem with that
• If any, fix that antivirus program
• That’s it, done

Fixing your antivirus program will fix this Windows Error Code 0xc0000005 problem.

3. Fix Registry on your Windows PC –

• Go to the Start Menu
• Click on the ‘RUN.’
• Type ” regedit.exe ” there
• After running, you will access the registry’s file
• That’s it, done

It will fix the registry to eliminate this Wow Error 0xc0000005 problem.

” OR “

• Research the registry cleaner programs
• Download a registry scanner program
• Do a Scan or Automatically scan it
• Close all open programs other than the registry cleaner
• Run your registry cleaner program
• After completion, close the registry cleaner program
• That’s it, Done

By fixing this registry, it will fix this Application Error 0xc0000005 problem correctly.

4. Create a System Restore Point on your Windows PC –

• Click on the Start Menu
• Go to the Computer
• Right-click on Computer
• Click on the properties there
• Click on system protection there on the left
• Click on the create option
• Type a description in the system protection box
• Click on ‘OK,’ & it will create
• That’s it, done

Creating the restore point will fix this Wow Error 0xc0000005 problem.

5. Fix System Restore Features on your Windows PC –

• Disconnect from the internet
• Go to the Start Menu
• Go to the control panel
• Open ‘Program and Features.’
• On the left side, Click on ‘View installed updates.’
• Find ‘Security updates for Microsoft Windows (KB2859537)’ there
• Uninstall the updates & restart your PC
• That’s it, done

Fix by system restore features can quickly fix and solve this type of Application Error 0xc0000005 problem.

Conclusion:

These are some top tips and tricks to quickly fix this Windows Error Code 0xc0000005 PC problem from you. Hope this post will help you eliminate this Error 0xc0000005 problem.

If are facing any error or problem while fixing this Windows Error Code 0xc0000005 PC problem, then comment down that error code problem below so that we can also fix it too in the comment section.

Windows installation encountered an unexpected error, 0xE0000100

If you’re encountering the error message Windows installation encountered an unexpected error on your computer while installing Windows 10, you can try the solutions we will present in this post to help you resolve the issue.

When you encounter this issue. you’ll receive the following full error message-

Windows installation encountered an unexpected error. Verify that the installation sources are accessible, and restart the installation.
Error code: 0xE0000100.

The error code can also appear during Windows Update.

During installation, this error can be caused by various problems. It could be caused if there is a problem with the disk partition, with the Installation media – and even if there is low or damaged RAM, corrupted registry files, or incorrect hardware configuration.

Windows installation encountered an unexpected error

If you’re faced with this error code 0xE0000100 during installation or during Windows Update, you can try our recommended solutions below and see if that helps to resolve the issue.

1. Clean the partition
2. Run CHKDSK Utility
3. Run the Hardware Troubleshooter
4. Check RAM
5. Modify the LoadAppInit_DLLs registry key

Let’s take a look at the description of the process involved concerning each of the listed solutions.

1] Clean the partition

You can use the built-in diskpart tool to clean your partitions.

Here, access the Command Prompt and execute the following commands one after the other:

Restart and see if you can install it.

3] Run CHKDSK Utility

A corrupt hard drive or bad sectors on the drive can also lead to the issue. In this case, you can run CHKDSK (check disk) utility to try to fix the disk corruption due to bad sectors.

Run the following command:

On restart check, if it helped.

1] Run the Hardware Troubleshooter

This solution entails that you run the inbuilt Hardware Troubleshooter and see if the error is resolved.

2] Check RAM

Turn off the system and replace the RAM with another RAM. You may also swap RAM slots and then boot the system. Check if the error still persists. Swapping of RAM is required when there is physical damage to RAM connectors or hardware.

3] Modify the LoadAppInit_DLLs registry key

Corrupt registry files lead to serious issues in the system including this error.

Do the following:

Since this is a registry operation, it is recommended that you back up the registry or create a system restore point as necessary precautionary measures. Once done, you can proceed as follows:

• Press Windows key + R to invoke the Run dialog.
• In the Run dialog box, type regedit and hit Enter to open Registry Editor.
• Navigate or jump to the registry key path below:

• At the location, on the right-hand side, double-click on the LoadAppInit_DLLs registry key to edit its properties.
• In the properties window, set the Value data to 0.
• Click OK to save changes.
• You can now close the Registry Editor window.
• Reboot your computer to let the changes take effect.

Windows Update Error Code 0xE0000100

Hope something here helps you.

Date: September 4, 2020 Tags: Installation

Windows installation encountered an unexpected error verify that the installation sources are

This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.

Answered by:

Question

I’m trying to install Windows 7 Ultimate onto a computer that is currently running Windows 7 RC. When I attempt to do an «upgrade» I get a not-unexpected error involving the inability to upgrade from the RC.

However, when I attempt to do a clean install, I get the following error:
«Windows installation encountered an unexpected error. Verify that the installation sources are accessible, and restart the installation.

Error code: 0xE000100″

This error happens regardless of if I try to boot from the disk or run the program after the computer has started. What other information would be helpful?

Answers

You cannot upgrade Windows 7 RC to Windows 7 RTM or Retail version. You can only perform a clean install. The error message may happens if your win7 installation DVD is corrupted. Try to copy all the files from Win7 DVD to local drive then run the setup.exe to perform a custom installation of windows 7. If you even cannot copy the files to local drive, the problem must be caused by the corrupted DVD.

You cannot upgrade Windows 7 RC to Windows 7 RTM or Retail version. You can only perform a clean install. The error message may happens if your win7 installation DVD is corrupted. Try to copy all the files from Win7 DVD to local drive then run the setup.exe to perform a custom installation of windows 7. If you even cannot copy the files to local drive, the problem must be caused by the corrupted DVD.

I’m having the same problem. So far I’ve tried the same Win7Ultimate x64 disc in two different computers with the same result. It gives the error immediately when I click for the clean install. There was something else on the drives, but it should be unreadable by Windows. Perhaps it checks for some free drive space or even some previous version.

I made an RC1 disc to try loading that instead. Same problem. I have never loaded RC1 before.

Right now, I’m running DBAN on the drive. Also I’ll run DBAN in another system.

Will update later.

. Update
I could only get through the install by starting with a clean drive.

Are you saying that I can’t do a clean install? I actually have to wipe my hard drive and then boot the installer from the disk?

In order to keep anything from a previous version, I would set aside that original drive and install Windows7 on a clean drive. That is considering you have a spare drive available.

I could only get through the install by starting with a clean drive.

You have tried a flat installation of Windows 7: Copy all the files from Win7 DVD to local drive then run the setup.exe to perform a custom installation of windows 7.

This method will help you to determine whether the problem is caused by the corrupted disc.

So I took the computer to Best Buy and gave it to the Geek Squad and told them all about it. I got it back 4 days later, and they said that the mobo was bad. I looked at their notes and got the impression that they didn’t really know what was wrong and didn’t want to get in too deep, but a bad mobo would explain some of the weird behavior that that computer has shown recently.

Just for the record, here’s a loose order of events that happened as I tried to install Windows 7:

1. Attempted clean install while Windows 7 RC was running: error 0xE0000100
2. Attempted upgrade while Windows 7 RC was running: Cannot upgrade from Windows 7 RC.
3. Attempted clean install while Windows 7 RC was running: error 0xE0000100
4. Attempted clean install by booting installer from disk: error 0xE0000100
5. Attempted Windows Vista clean install by booting installer from disk: error 0xE0000100
6. Completed Windows XP Tablet factory restore from disk: Windows failed to start because of a missing configuration file.
7. «»
8. Took computer to Best Buy
9. stuff
10. Concluded that the motherboard was bad.

VARCONER

Блог о программировании, веб-разработке и компьютерах, а также о многом другом…

После установки Windows 7 ошибка: The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed

После неудачной установки эксперементального Linux совместно с Windows 7, а также неудачной разметки разделов, перестали загружаться вообще все системы. Попытка восстановления Windows не дала результат. После этого начал чистую установку Windows 7. Из установщика удалил все старые разделы, разметил по новому и начал установку. Однако на завершающем этапе получил ошибку: «The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed». Ошибка циклическая — то есть после перезагрузки, которую советовал сделать установщик, она появлялась вновь.

Решение, кстати, нашлось на официальном форуме Microsoft. Опишу вкратце что нужно сделать:

1. Когда появилась указанная выше ошибка, нажимаем Shift+F10 — открывается командная строка — уже легче!
2. Пишем команду regedit — запускается редактор реестра.
3. Открываем ветку HKEY LOCAL MACHINE/SYSTEM/SETUP/STATUS/ChildCompletion. Справа выбираем параметр setup.exe и меняем его значение с 1 на 3. Жмем ОК.
4. Реестр закрываем и теперь можно нажимать ОК в окне ошибки. Начинается перезагрузка.

После указанных действий, загрузка Windows 7 прошла успешно. Причина возникновения ошибки скорее всего в том, что загрузчику Windows не понравилось что-то в разметке диска. Однако, как видно, это не повод сразу менять жесткий диск — всего-то надо было указать установщику что его работа закончена, выставив соответствующий флаг в реестре.

fix: The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2503.

The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2503.

Welcome to Microsoft Community. We are here to assist you will all your Windows related issues and queries.

You have mentioned that you are unable to install the program named “Smartscore” by Musitek which you have downloaded as you are getting the error: “The installer has encountered an unexpected error installing this package. This may indicate a problem with this package.” and the error code shown is “2503”. I would like to have some information regarding this error:

1. When exactly are you getting this error? Is it when you try to open the program setup file which you have downloaded or is it in between the installation of the package?

2. Have you made any recent changes on the computer prior to this issue?

3. Did you try any troubleshooting steps for this issue?

4. Do you have any third party security program installed on the computer?

This might be either due to some issues with the Windows Installer service or it might be an issue with the package that you have downloaded. So, I would suggest you to try downloading the package again and then try installing it.

This might also happen, if the downloaded file is corrupted due to some malicious software infection in the computer.

Let’s try some troubleshooting steps and check if that helps:

Method 1: Check the Windows Installer Service and also unregister and re-register the Windows Installer

Step 1: Check the Windows Installer Service

a) Press “Windows Logo” + “R” and type “service.msc”

b) In the “Service” window scroll down and find the “Windows Installer” service. Double-click “Windows Installer” in the Services list to open its properties window.

c) On the “General” tab, make sure the service is started under “Service status”.

d) If the service was stopped, under “Service status”, then start the service by clicking on the “Start” button, and then click “OK”.

Step 2: Unregister and re-register the Windows Installer

a) Press “Windows Logo” + “R” to open the Run Command Window.

b) In the run command window type the following command and click on “Ok”.

c) Press “Windows Logo” + “R” to open the Run Command Window again.

d) In the run command window type the following command and click on “Ok”.

e) Now, try installing the package again and check.

Method 2: Perform a Clean Boot and find out which application/service is causing this issue.

A clean boot helps to eliminate software conflicts and to determine what is causing the problem. Perform a clean boot on the computer by following the steps given in the link:

Follow all the steps given in this link and try to figure out the application or service causing this issue.

Note: After you have finished troubleshooting, refer the article “How to reset the computer to start as usual after troubleshooting with clean boot” for Windows 8, given under the section “More Information” to reset the computer to start as usual from the above link.

Let’s also check if the computer is infected by any malicious software infections by running the Microsoft Safety Scanner.

Method 3: Run Microsoft Safety Scanner and check if there are any infections in the computer.

I would also suggest you to check if the computer is infected by any malicious software. For this let’s try running the Microsoft Safety Scanner and then check the issue. You can download and run the Safety Scanner from this link:

Note: When running a scan using an Anti Virus program, any data files that are infected may be cleaned by deleting the file entirely, which means there is a potential for data loss.

Hope this resolves the issue. If this issue persists, please get back to us with the results of the above troubleshooting methods.

FINAL UPDATE: It was a defective CPU causing all the issues described below. After switching to a different Ryzen 5900x all problems disappeared and it is now working perfectly.

_________________________________________

Build your own PC they said. Switch to AMD they said….

Motherboard: ASUS ROG crosshair VIII Dark Hero.

CPU: Ryzen 5900x

RAM: 4x8gb G.Skill TridentZ RGB DDR4-4000 (CL18-22-22-42)

PSU: Corsair RM850X 850w.

GPU: Gigabyte RTX2070 Super

CPU Cooler: NZXT Kraken Z73

HDD: Samsung Evo Pro 980 2tb nvme m.2.

Cabinet: Nzxt H710i.

Hello.

So i decided to build my own PC this time around, and it has been pure hell. I really hope that someone here can help me out, or at least let me know if it sounds plausible that there is a fault in one of my components. I have done a lot of testing to locate the error and will try to describe it here, so bear with me, this can get a bit long.

I have connected everything and it all looks good in the bios. I have not overclocked anything and i am running the RAM pure vanilla without DOCP, so at 2133mhz. I have updated the Motherboard to the latest bios.

When i boot up on my windows USB stick with a bootable windows, i don’t get very far until i am hit with the error: “Windows installation encountered an unexpected error. Verify that the installation sources are accessible, and restart the installation. (Error: 0xC0000005)”

So i thought that it was probably something with my USB stick or install media. So i did this:

1. Try another USB stick — same error.

2. Try with an external harddrive formatted by the Windows boot installer — same error.

3. Try downloading a Windows ISO and use Rufus to create a bootable USB — same error.

4. Create bootable drive with Rufus on external harddrive — same error.

5. Use rufus to create bootable media from older version of Windows i used a couple of years ago — same error.

After Googling a lot o discovered that installing Windows on an m.2 requires some settings in the bios. I did this:

1. Make sure CSM is disabled.

2. In secure boot set OS to “Other OS”

3. Clear secure boot keys.

4. Boot up on windows install media.

Same error.

Please note the the M.2 drive is showing just fine in the bios. Sometimes i get a few steps in on the installer, and i can see that the Windows installer can also see the M.2. drive.

I then decided to try and partition the M.2 drive via cmd prompt. I did this:

1. Partition the M.2 drive.

2. Make the drive GPT.

3. Format to NTFS.

Same error.

I then took out the M.2 drive and tried it in my old PC. Works just fine there.

Maybe if i install on another drive? I did this:

1. Try to install on older SATA SSD drive i had lying around.

Same error.

So it was not the boot media or the harddrive. Then it surely must be the RAM. I did the following:

1. Take out all ram blocks.

2. Insert just one RAM block in slot B2 (as described in the manual).

Same error. I then did this:

1. Insert another RAM block in slot A2.

Same error. Maybe the RAM was just from a bad batch or was too fast for the motherboard. I did this:

1. Take out all RAM.

2. Take 8gb 2600 mhz Kingston RAM from my old PC and see i that would work — same error.

3. Take 2x8gb 2600 mhz Kingston RAM and see if that would work — same error.

Same Error.

So apparently it wasn’t the RAM. Maybe the processor was installed wrong or the cooler not cooling. I did this:

1. Check processor temperature in bios — It was around 50 degrees celcius.

2. Check AIO pump flow in bios — it was at 1100 rpm.

3. LCD on pump says fluid temperature i 30-35 degrees celcius.

4. Dismantle pump and take out processor to check installation.

5. Conclude that no pins are bent or missing, installed again.

6. Installed AOI again. Same temperatures.

Same error on Windows 10 install.

Maybe the BIOS is just really bad?

1. Install new beta bios.

Same error.

1. Install older bios than the one the MB came with.

Same error.

So now i am at a complete loss as to what can be wrong.

Any suggestions?

Questions:

1. Is there a way i can control, without having Windows 10 installed, if i have a faulty CPU?

2. Is it possible to do diagnostics on the motherboard?

3. Is it possible to check if the PSU is faulty, and could that even create errors like this?

4. My GPU came from my old machine. It is about a year old and has worked perfectly in my other machine. But could the GPU somehow be cause any of this?

5. Am i missing some settings in the BIOS or something that i should change? I have tried doing a safe bios boot as well with the same results.

Notes:

1. During the different installations it is a bit random how far i get. I did manage to once get it installed and actually boot into windows. But from there it was a constant loop of BSOD’s until Windows 10 got so corrupted that i couldn’t boot into it anymore. The BSOD’s have been all over the place. Some with driver faults, some with memory faults, and some unhandled exceptions.

2. I am using the NZXT Smart device V2 to power fans and RGB in the NZXT H710i cabinet.

3. If i have to do an RMA on the MB it would be great if i could very specifically point out what is wrong. I see now that the shop where i bought it is kindda famous for just denying RMA’s and refunds etc.

I hope someone here can help!

Updates:

1. I’ve now plugged in the 4 pin CPU power as well as the 8 PIN in case it was a power issue. Didn’t fix it.

2. I’ve switched the GPU to an older Asus ROG STRIX Geforce 980ti. This did not fix the issue either.

3. Did an overnight memtest. It found no errors in memory.

4. Today i managed to get it working’ish. And i am now certain there is an issue with the MB.

I wanted to try and see if i really couldn’t install on a normal sata ssd. So i took out my old sata from my old computer and put that in. The machine booted into the windows installation on that drive.

That gave me an idea, and i put the m.2 drive into my old PC, installed Windows on it with no issue what so ever. Updated. Did some disk checks, and everything was fine. Then i moved the m.2 to the new computer. It booted into windows.

However it is a constant stream of BSOD’s of all kinds. The m.2 got corrupted and when i did chkdsk it would just crash midway through. Sfc was locked.

I moved the m.2 back in my old machine. Chkdsk and sfc fixed the errors immediately. I then moved the m.2 back to the new machine, and the bsod’s continued. Samsungs own monitor tool says the disk is fine and as no bad sectors or errors and is operating at 100%.

I’ve managed to run prime95 to stress the Ryzen 9500x. There was no crash and the temperature was just fine. It ran for 30 minutes, max temp was 63 degrees.

But when i move around in Windows it constantly crashes, gets slow etc, and corrupts the harddrive.

This is the list of BSOD’s i have gotten:

Irql not less or equal x5System PTE Misuse x7KMODE_Exception not handled x5cache manager x1Memory_Management x1Critical process died x5System service exception x5DPC watchdog violation x1System_Thread_Exception_Not_Handled x4