Windows setup use the other installation disc that says 64 bit

Infopackets Reader Tom M. writes:

» Dear Dennis,

I am running Windows 10 that came with my computer. I decided I want to do a clean install of Windows 10 while I’m still logged into my Windows 10 desktop — this is possible if you run setup.exe form the disc, then select «Custom» during the installation procedure. I used the
Media Creation Tool (from Microsoft) to download Windows 10 x64 10586, and I burned that to disc. However, when I try to run setup.exe from the disc, it gives me an error that says: ‘Use the other installation disc that says 64-bit. When you insert it, Windows setup will restart automatically.’ I’ve downloaded the ISO 3 times and I still get the error. I am running Windows 10 Professional x64. «

My response:

I was perplexed by this problem as I have not encountered it before. I asked Tom if he would like me to connect to his system via
my
remote desktop
support service, and he agreed. Tom then demonstrated the problem he was having — and sure enough, the installation aborted each time.

After a bit of research I discovered how to fix the ‘Use the other installation disc that says 64-bit’ error;
for the record, this solution works with Windows 7, 8, or 10. In Tom’s particular case, he had downloaded both versions of Windows 10 (32 bit and 64 bit) onto the single ISO, so the instructions on resolving this pesky error message are as follows:

1. If you already downloaded and burned the Windows 7, 8, or 10 .ISO file onto DVD or USB, insert the disc into the drive. If you downloaded the ISO file but did not burn it, you can use
   WinCDEmu to mount the .ISO file as a virtual DVD drive. To do so: once WinCDEmu has been installed, right click the Windows .ISO file, then
   you should see a «Mount» option in the dialogue menu; click it, then select the drive letter you want to use for the drive (example: D drive).
    
2. Next, click Start, then click «My Computer» or «This PC». A Windows Explorer window will appear; look for the DVD / USB drive that has the Windows installation on it (example: D Drive), then right click over top of the drive letter and select «Open» from the dialogue menu. Now, depending on the type of disc / disc image (ISO) you have, things will look one of two ways:

   a) If you see a «sources» folder, double click it and then look for the setup.exe file. Double click it and the Windows installation should begin.

   b) If you don’t see a «sources» folder, but instead see «x32» or «x64» (or
   «amd64»), double click either folder that corresponds to your operating system architecture. For example, if you are currently running Windows 10 x64, then you would double click the «x64» folder. Now you should see the «sources» folder; double click it and then navigate to the «setup.exe» file; double click the setup.exe file and your installation should begin.

I hope that helps.

Got a Computer Question or Problem? Ask Dennis!

I need more computer questions. If you have a computer question — or even a
computer problem that needs fixing —
please email me with your question
so that I can write more articles like this one. I can’t promise I’ll respond to
all the messages I receive (depending on the volume), but I’ll do my best.

About the author: Dennis Faas is the owner and operator of Infopackets.com.
With over 30 years of computing experience, Dennis’ areas of expertise are a
broad range and include PC hardware, Microsoft Windows, Linux, network
administration, and virtualization. Dennis holds a Bachelors degree in Computer
Science (1999) and has authored 6 books on the topics of MS Windows and PC
Security. If you like the advice you received on this page, please up-vote /
Like this page and share it with friends. For technical support inquiries,
Dennis can be reached via Live chat online this site using the Zopim Chat
service (currently located at the bottom left of the screen); optionally, you
can contact Dennis through the website
contact form.

In case that you are an amateur to install or to Upgrade Windows in your computer, you may experience this issue saying Use Other Installation Disc that says 64-bit.

The issue is that when consuming Windows ISO File and when you attempted to run “setup.exe”, at that point you may get an error of using the other installation disc that says 64-bit. When you put it in, Windows Setup will restart naturally.

So here is a simple procedure to settle that problem or error without utilizing any devices.

Fix: ‘Use another installation disc that says 64-bit’ Error

After a touch of exploration, we have found how to fix the “Use other installation discs that says 64-bit’ problem. For the record, this solution works with Windows 7, 8, or 10. If you have downloaded the two adaptations of Windows 10 (32 bit and 64 bit) onto the single ISO, so the directions on settling this bothersome blunder message are as per the following:

1. If you previously downloaded and copied the Windows 7, 8, or 10.ISO record onto DVD or USB, insert the disc into the drive.
2. In case you downloaded the ISO document yet didn’t copy it, you can utilize WinCDEmu to mount the.ISO record as a virtual DVD drive.
3. To do as such: once WinCDEmu has been introduced, right-click the Windows.ISO record, at that point, you should see a “Mount” choice in the drop menu; click it, at that point select the drive letter you need to use for the drive (model: D drive).
4. Next, click Start, at that point, click “My Computer” or “This PC”. A Windows Explorer window will show up; search for the DVD/USB drive that has the Windows installation on it (D Drive), and then from there, right-click overhead of the drive and select “Open” from the drop menu.
5. Presently, contingent upon the sort of disc picture (ISO) you have, things will look one of two different ways.
6. If you see a “sources” organizer, double-tap it and afterward search for the setup.exe document. Double-tap it, and the Windows installation should start.
7. If you don’t see a “sources” organizer, but rather observe “x32” or “x64” (or “amd64”), double-tap either envelope that relates to your working framework design. For example, in case that you are as of now running Windows 10 x64, at that point, you would double-tap the “x64” option. Presently you should see the “sources” organizer; double-tap it and afterward search to the “setup.exe” option; double-tap the setup.exe document, and your installation should start.

Now the error should be fixed with these simple procedures. This was an easy way to get rid of your problem.

Conclusion

In this discussion, we discussed the steps to fix the error saying, Use other installation discs that say 64-bit. All these steps are explained in an easy way, and the problem should be solved with them for the user. The data mentioned here is relevant and authentic; we hope this info is useful to you, and if there are any questions, you can leave a comment below.

Also Check:

• [Easy Fix] Apache Shutdown Unexpectedly in XAMPP
• How to Fix the Error App Says Cleaning iPhone
• [Easy Fix] Airpods Case Not Charging (No Light)

FAQ’s

How would you reinstall a disc drive?

In the System Properties first, you need to search and click the Hardware tab. And then on the Hardware tab, go to Device Manager box. There you need to click on the Device Manager option. In the Device Manager menu bar option, you need to click on the DVD/CD-ROM image. Under the DVD/CD-ROM image, snap to pick the drive to be reinstalled.

For what reason is my disc drive not understanding discs?

Affirm the drive is recorded in Device Manager, and afterward reinstall the gadget to determine any blunder states. In Windows, scan for and open Device Manager. Double-tap DVD/CD-ROM drives to extend the classification. In the event that a CD/DVD drive isn’t recorded in DVD/CD-ROM drives, go to CD or DVD Is Not Detected if you are using Windows 10, 8.

How would you fix a DVD player that won’t read the disc?

Expel the disc from the DVD player. Utilize a build-up free material and some denatured liquor or water to clean the disc and evacuate any residue or smears that may keep the player from perusing it appropriately. Reinsert the disc into it and then press “Play” to check whether cleaning the circle fixes the “NO Disk” mistake.

For what reason do DVD players quit working?

Blue-ray players work by utilizing a laser to decipher information on the circle into sound and video signals. Fortunately, it’s generally a messy focal point that hinders your DVD player’s capacity to understand media. And then, after that, once in a while, a focal point can basically wear out and quit working, which implies a substitution is altogether.

How would you fix a USB, please insert a disc?

Select the USB disc with the right mouse button. Presently click on the “Change drive letter and way” tab. Rename the drive letter to any letter that doesn’t exist as of now on the PC. From that point forward, restart the PC and check if the mistake ‘please insert the disc into removable drive’ vanished.

Are DVD players out of date?

The appropriate response is that, truly, your DVD player or Blu-ray player is most likely out of date, since there are as of now better choices on their way for individuals who need the most noteworthy video quality, and there are some truly incredible real-time features for individuals who esteem accommodation.

What do you mean by Disk Cleanup?

Disc cleanup is a support utility that was created by Microsoft for its Windows working framework. The utility outputs your PC’s hard drive for documents that you no longer need, for example, brief records, reserved site pages, and dismissed things that end up in your framework’s Recycle Bin.