Windows vista or above detected making a second patch - Доктор Windows

GALLETTO V 54 — ChipTuner Forum

Чип-тюнинг коммерческой техники Кама3, ГАЗ от SMS-Soft

Argutin Motors: VAG Bosch MEDC17

Прошивки Magneti Marelli VAG от Art-Pro

Прошивки Peugeot/Citroen от Art-Pro

Прошивки Renault от А.Юрлова

GALLETTO V 54

offline

автомеханик

Регистрация:: 01.01.2016

Сообщений:: 21

Адрес:: Минск

Доброго времени суток, подскажите пожалуйста где можно скачать установочную программку на GALLETTO V 54

Диагност

Регистрация:: 02.02.2013

Сообщений:: 881

Адрес:: Воронеж

В поисковике яндексе или гугл наберите там много вариантов

offline

Ремонт авто

Регистрация:: 03.01.2012

Сообщений:: 2,671

Адрес:: Волгоградская область

А что диска нет програмнного?

offline

автомеханик

Регистрация:: 01.01.2016

Сообщений:: 21

Адрес:: Минск

Я новичок в этой сфере — программирование ЭБУ, сам работаю с авто уже 8 лет , хотелось усовершенствоваться немного ) искал но ничего не нашел , если не затруднит скиньте ссылочку, заказал GALLETTO V54 , и MPPS16 , так диск на GALLETTO пришел с поврежденными файлами

offline

Ремонт авто

Регистрация:: 03.01.2012

Сообщений:: 2,671

Адрес:: Волгоградская область

Если получится сделать копию диска GALLETTO V54 , то я вам вышлю.

offline

автомеханик

Регистрация:: 01.01.2016

Сообщений:: 21

Адрес:: Минск

есть он поврежден Добавлено через 3 минуты

Спасибо огромное

Последний раз редактировалось механич; 03.01.2016 в 18:46.

Причина: Добавлено сообщение

Диагност

Регистрация:: 02.02.2013

Сообщений:: 881

Адрес:: Воронеж

Где то был архив подключайся через скайп отправлю.

offline

электрик

Регистрация:: 03.11.2010

Сообщений:: 412

Адрес:: Респ. Башкортостан Темясово

Диагност

Регистрация:: 26.06.2014

Сообщений:: 9,997

Адрес:: Ярославль

offline

автомеханик

Регистрация:: 01.01.2016

Сообщений:: 21

Адрес:: Минск

Спасибо всем ) тема закрыта

offline

Ремонт авто

Регистрация:: 03.01.2012

Сообщений:: 2,671

Адрес:: Волгоградская область

Завтра если будет время то сделаю. А так вот дал vento702, скачивайте.

offline

электрик

Регистрация:: 27.11.2011

Сообщений:: 2,083

Адрес:: Пермский краи,г Горнозаводск

у кого есть фаил русифицирования ?

Диагност

Регистрация:: 26.06.2014

Сообщений:: 9,997

Адрес:: Ярославль

вот.
только там ошибочка , вместо вкл зажигание выкл в начале при установке связи

сами исправите

Вложения:

Последний раз редактировалось vento702; 07.01.2016 в 13:56.

Диагност

Регистрация:: 26.06.2014

Сообщений:: 9,997

Адрес:: Ярославль

17 TURN DASHBOARD ON = ВКЛЮЧЕНИЕ ПРИБОРНОЙ ПАНЕЛИ

offline

Ремонт авто

Регистрация:: 03.01.2012

Сообщений:: 2,671

Адрес:: Волгоградская область

Денис, нашли файл ?? а то у меня есть.

Диагност

Регистрация:: 02.02.2013

Сообщений:: 881

Адрес:: Воронеж

Парни подскажите GALLETTO 2 на Windows 10 работает?

offline

Ремонт автомобилей

Регистрация:: 25.01.2006

Сообщений:: 259

Адрес:: Украина, г.Харьков

offline

Автоэлектрик

Регистрация:: 18.04.2012

Сообщений:: 3

Адрес:: Пронск

Привет Всем! Может кто помочь с установкой Galletto 4 v54 Master на windows 10, что то я пробовал много раз, не в какую не получается.

offline

диагност

Регистрация:: 21.06.2007

Сообщений:: 2,600

Адрес:: Саратов

Нужна помощь. Воюю с МТ80 на авео. Не хочет выходить на связь. Пробовал и как 1766 и как 1762. Обратил внимание что на зелёном проводе универсального кабеля (igniction) постоянно присутствует 12 Вольт. Мультифлешером контроллер читается. Подскажите что нибудь. В какую сторону рыться?

offline

диагност

Регистрация:: 21.06.2007

Сообщений:: 2,600

Адрес:: Саратов

Попробовал МЕ17.9.7 — влёт. И чтение и запись. Но там не используется отключаемое питание.Добавлено через 3 часа 47 минут

Сорри. Не в той теме написал.

Последний раз редактировалось бардиг; 01.05.2017 в 13:35.

Причина: Добавлено сообщение

offline

ЧипТюнинг, диагностика, одометры, автоэлектрика.

Регистрация:: 01.04.2017

Сообщений:: 55

Адрес:: Нижний Новгород

Товарищи, скинте плз сфот на prozakelitegroup@yandex.ru

offline

летчик

Регистрация:: 31.08.2008

Сообщений:: 365

Адрес:: Оренбург

Здравствуйте!Выручайте купил Галету 54 у китайцев ,не могу установить ,все делаю как по видео которое китайцы на диске приложили,драйвер стал исключительно в диспечере файлов есть,программа?тоже установилась перенес приложенные DDL-ки,сделал совместимость с ПАК-3,запускаю щелкает реле в программаторе и выскакивает запись?windows vista or above detected making a second patch,нажимаю ок еще некоторое время думает ,потом щелчок и все программа не запускается,подскажите что не так?

offline

рабочий

Регистрация:: 10.04.2017

Сообщений:: 43

Адрес:: Железногорск

Всех с наступающим! У кого есть распиновка кабеля ОБД-2 ДБ-15 от GALLETTO V 54

offline

Электрик-диагност

Регистрация:: 18.07.2013

Сообщений:: 144

Адрес:: Саратов

offline

Водитель автомобиля

Регистрация:: 21.12.2016

Сообщений:: 1

Адрес:: Каменск-Уральский

У меня Галеттой тоже не связывается этот блок.

offline

Ремонт авто

Регистрация:: 03.01.2012

Сообщений:: 2,671

Адрес:: Волгоградская область

Парни, поделитесь проверенным софтом на галю 54. Покупал на екупро в месте с ПО, а ПО с вирусом, замучился все потом восстанавливать программы. Сносит ПО-54 за неделю все программы. Сейчас порядок привел компьютер, и как-то боюсь ставить ПО- от галетто 54.

offline

Автомеханик

Регистрация:: 20.02.2016

Сообщений:: 1,230

Адрес:: Норильск

offline

Теплотехник

Регистрация:: 09.01.2012

Сообщений:: 32

Адрес:: Липецк

Парни, поделитесь проверенным софтом на Galletto v 54. В посте 9 облако пишет зараженный файл , скачать не дает. Кому не трудно киньте на почту. aldr2000@mail.ru

Здесь присутствуют: 1 (пользователей: 0 , гостей: 1)

Текущее время: 13:56. Часовой пояс GMT +4.

Источник

Location Offline
Junior Member

Reputation:
0

Thanks Given: 73
Thanks Received: 13 (8 Posts)

Posts:
133
Threads:
26

Joined: Sep 2018

1

02-06-2020, 02:45 PM

Hi guys

I’ve been trying to install FGTech 0475 on windows 7 32bit.

Everything seems to install ok but it won’t launch .

When I try and launch it I get a message saying «windows vista or above detected , making second patch» then the fgtech device makes a couple of clicks and that’s it.

Does anyone know a fix?

Thanks for any help given

Thanks given by:

GD90
Location Offline
Senior Member

Reputation:
40

Thanks Given: 266
Thanks Received: 223 (104 Posts)

Posts:
295
Threads:
13

Joined: Sep 2011

2

02-06-2020, 03:05 PM

try put xp compatibility!

Thanks given by: Inked

Inked
Location Offline
Junior Member

Reputation:
0

Thanks Given: 73
Thanks Received: 13 (8 Posts)

Posts:
133
Threads:
26

Joined: Sep 2018

3

02-06-2020, 10:38 PM

(02-06-2020, 03:05 PM)GD90 Wrote: try put xp compatibility!

Thanks for the reply Wink

I’ve tried running it in xp sp3 compatibility mode and running it as admin but it still won’t launch.

I’ve also tried installing it directly on C: drive and I have no antivirus or firewalls .

Does anyone else have any ideas?

Thanks given by:

Reputation:
128

Thanks Given: 214
Thanks Received: 504 (239 Posts)

Posts:
750
Threads:
30

Joined: Oct 2019

4

02-07-2020, 08:55 AM

My history with this software…….

windows 7 with i5 3rd gen = runs and operates fine.
windows 10 i5 8th gen = not read a ecu but opens and operates fine.
windows 10 intel celeron N2830 = can’t get it to open regardless of compatibility settings
windows 10 intel atom z8350 = with certain compatibility settings I can get it to run but when selecting a k-line driver the software crashes and I have no idea why.

I list the cpu’s as I struggle to figure out what it can be, I made sure all c++ Redistributable where installed the same as the working laptops.

Thanks given by: Inked

zeljolaki
Location Offline
Junior Member

Reputation:
1

Thanks Given: 71
Thanks Received: 26 (19 Posts)

Posts:
85
Threads:
32

Joined: Dec 2013

5

02-07-2020, 01:38 PM

Hi!
It won’t start with my laptop while it is charging, it only runs on battery ….

Inked
Location Offline
Junior Member

Reputation:
0

Thanks Given: 73
Thanks Received: 13 (8 Posts)

Posts:
133
Threads:
26

Joined: Sep 2018

6

02-07-2020, 01:58 PM

(02-07-2020, 08:55 AM)vectrac20tsri Wrote: My history with this software…….

windows 7 with i5 3rd gen = runs and operates fine.
windows 10 i5 8th gen = not read a ecu but opens and operates fine.
windows 10 intel celeron N2830 = can’t get it to open regardless of compatibility settings
windows 10 intel atom z8350 = with certain compatibility settings I can get it to run but when selecting a k-line driver the software crashes and I have no idea why.

I list the cpu’s as I struggle to figure out what it can be, I made sure all c++ Redistributable where installed the same as the working laptops.

(02-07-2020, 01:38 PM)zeljolaki Wrote: Hi!
It won’t start with my laptop while it is charging, it only runs on battery ….

Thanks for the replies guys.

This is very interesting, you would think that if it’s that difficult to get it to run there would be more threads like this.

The laptop I use has a AMD processor and runs everything else.

I did see something about there being separate 32bit and 64bit drivers and also separate drivers for intel and AMD but I can’t find any.

Is the two clicks from the fgtech device normal?

Thanks given by:

Amaa

Location Offline
Senior Member

Reputation:
316

Thanks Given: 198
Thanks Received: 1055 (316 Posts)

Posts:
740
Threads:
34

Joined: Oct 2016

7

02-07-2020, 02:09 PM

(02-07-2020, 01:58 PM)Inked Wrote:

(02-07-2020, 08:55 AM)vectrac20tsri Wrote: My history with this software…….

windows 7 with i5 3rd gen = runs and operates fine.
windows 10 i5 8th gen = not read a ecu but opens and operates fine.
windows 10 intel celeron N2830 = can’t get it to open regardless of compatibility settings
windows 10 intel atom z8350 = with certain compatibility settings I can get it to run but when selecting a k-line driver the software crashes and I have no idea why.

I list the cpu’s as I struggle to figure out what it can be, I made sure all c++ Redistributable where installed the same as the working laptops.

(02-07-2020, 01:38 PM)zeljolaki Wrote: Hi!
It won’t start with my laptop while it is charging, it only runs on battery ….

Thanks for the replies guys.

This is very interesting, you would think that if it’s that difficult to get it to run there would be more threads like this.

The laptop I use has a AMD processor and runs everything else.

I did see something about there being separate 32bit and 64bit drivers and also separate drivers for intel and AMD but I can’t find any.

Is the two clicks from the fgtech device normal?

Had same problem before. Used other installer then everything worked fine!

Thanks given by: Inked

Inked
Location Offline
Junior Member

Reputation:
0

Thanks Given: 73
Thanks Received: 13 (8 Posts)

Posts:
133
Threads:
26

Joined: Sep 2018

8

02-07-2020, 02:13 PM

(02-07-2020, 02:09 PM)Amaa Wrote:

(02-07-2020, 01:58 PM)Inked Wrote:

(02-07-2020, 08:55 AM)vectrac20tsri Wrote: My history with this software…….

windows 7 with i5 3rd gen = runs and operates fine.
windows 10 i5 8th gen = not read a ecu but opens and operates fine.
windows 10 intel celeron N2830 = can’t get it to open regardless of compatibility settings
windows 10 intel atom z8350 = with certain compatibility settings I can get it to run but when selecting a k-line driver the software crashes and I have no idea why.

I list the cpu’s as I struggle to figure out what it can be, I made sure all c++ Redistributable where installed the same as the working laptops.

(02-07-2020, 01:38 PM)zeljolaki Wrote: Hi!
It won’t start with my laptop while it is charging, it only runs on battery ….

Thanks for the replies guys.

This is very interesting, you would think that if it’s that difficult to get it to run there would be more threads like this.

The laptop I use has a AMD processor and runs everything else.

I did see something about there being separate 32bit and 64bit drivers and also separate drivers for intel and AMD but I can’t find any.

Is the two clicks from the fgtech device normal?

Had same problem before. Used other installer then everything worked fine!

Do you know what one you used?

I’ve used the software that came with it, the one by fantomel ( I think this was the same as the one that came with it) and the one uploaded by Chris.

Thanks given by:

Amaa

Location Offline
Senior Member

Reputation:
316

Thanks Given: 198
Thanks Received: 1055 (316 Posts)

Posts:
740
Threads:
34

Joined: Oct 2016

9

02-07-2020, 02:15 PM

I can check when I’m home later today

Thanks given by: Inked

Источник

I succeeded to run FG tech Galletto (ONLY 0475 FW) on Windows 10 64bit..

If Says:

INFORMATION
Windows Vista or above detected, making a second patch

then nothing

Right click on fgtech icon dann properties denn compatibility and change program compatibility Windows 7 or Windows 8
Works fine on my Lenovo laptop

and don’t forget working only on FG tech Galletto 0475 fw

This is how to update 0386 to 0475 for FGTech 4

1.For tool number 0386: ept file,fix file,hex dump and 2 versions of programs V54 used for it, the one from china and the AES November software.

2.For tool number 0475: ept file,fix file, hex dumps made from my tool and program V54 for it that does not need time back.

3.For both tools you have here how to connect to it, how to read firmware movie, how to write dump that you wish.

Reading and writing the mcu for this tool can be done with old Philips LPC 2000 software and USB-TTL adapter, preferd the one that uses PL2303 chipset. You need also a jumper in position to do that.
If you want to check CRP level of your NXP LPC2119 mcu you can do that with FlashMagic and USB-TTL adapter.

Download link: https://mega.nz/#F!9oRj2T6L!uPLJ7AhbS2phDvrfrXgFwA

Password: fantomelfree4galletto

Source: https://cartechnology.co.uk/showthread.php?tid=8474

Galletto V54 Windows 10 64bit: How to update FGTech fw 0386 to 0475

Источник

6th February, 2020, 02:58 AM

#1

FGTECH 0475 Won’t Boot

Hi guys

I’ve been trying to install FGTech 0475 on windows 7 32bit.

Everything seems to install ok but it won’t launch .

When I try and launch it I get a message saying «windows vista or above detected , making second patch» then the fgtech device makes a couple of clicks and that’s it.

Does anyone know a fix?

Thanks for any help given
7th February, 2020, 03:42 PM

#2

try to start as administrator…
The Following User Says Thank You to figani For This Useful Post:

Inked (7th February, 2020)
7th February, 2020, 04:07 PM

#3

Originally Posted by figani

try to start as administrator…

Thanks for the reply

I’ve tried running it in xp sp3 compatibility mode and running it as admin but it still won’t launch.

I’ve also tried installing it directly on C: drive and I have no antivirus or firewalls .
7th February, 2020, 06:44 PM

#4

try this !
yes, it change date, but will be reset automatic after exist software

hxxps://mega.nz/#!mkt20BCZ!kfWQp12Sq-8XJPcbg-vx92Md5_W_RAerMfD5PbmdOyU

replace xx to tt

Last edited by blackpirate; 7th February, 2020 at 06:46 PM.

If freedom is outlawed, only outlaws will have freedom!!!!
The Following User Says Thank You to blackpirate For This Useful Post:

Inked (7th February, 2020)
7th February, 2020, 07:15 PM

#5

Originally Posted by blackpirate

try this !
yes, it change date, but will be reset automatic after exist software

hxxps://mega.nz/#!mkt20BCZ!kfWQp12Sq-8XJPcbg-vx92Md5_W_RAerMfD5PbmdOyU

replace xx to tt

Thanks I’ll give it a go

What is it?

From the name it looks like a firmware flasher.
8th February, 2020, 05:19 AM

#6

Originally Posted by blackpirate

try this !
yes, it change date, but will be reset automatic after exist software

hxxps://mega.nz/#!mkt20BCZ!kfWQp12Sq-8XJPcbg-vx92Md5_W_RAerMfD5PbmdOyU

replace xx to tt

I downloaded it but it’s just a flasher
8th February, 2020, 05:27 AM

#7

I went into windows event viewer and it shows that eobd2 is crashing.
9th February, 2020, 04:43 PM

#8

to start the 0475 software first you need to connect it to the car, or that adapter to the power, then the software will start, after that it will start every time, whether you are connected to the car or not
The Following User Says Thank You to zoki21 For This Useful Post:

Inked (9th February, 2020)
9th February, 2020, 04:46 PM

#9

well you have installed and you should hear that click since the windows vista appears, just do as I told you, do not insert anything further into the program 0475
The Following User Says Thank You to zoki21 For This Useful Post:

Inked (9th February, 2020)
9th February, 2020, 05:04 PM

#10

Originally Posted by zoki21

to start the 0475 software first you need to connect it to the car, or that adapter to the power, then the software will start, after that it will start every time, whether you are connected to the car or not

Thanks for the reply

I haven’t tried connecting it to a car using obd yet , but I have been trying while it plugged in using the power supply.
9th February, 2020, 06:26 PM

#11

You don’t need to connect it to car…
Check your driver, you didn’t install it correctly,
I had the same problem, and in some times I must
run the program 2-3 times to start….
The Following User Says Thank You to Panathaole For This Useful Post:

Inked (9th February, 2020)
9th February, 2020, 06:36 PM

#12

Originally Posted by Panathaole

You don’t need to connect it to car…
Check your driver, you didn’t install it correctly,
I had the same problem, and in some times I must
run the program 2-3 times to start….

How do you install the driver?

I go into device manager and direct it to the driver folder that is in the fgtech installation folder.

Edit:
Is there a more up to date driver for windows 7 32bit amd processor?
9th February, 2020, 07:15 PM

#13

if that doesn’t help you then you have bad hardware that is defective, Chinese bad copy
9th February, 2020, 07:53 PM

#14

Uninstall and remove the driver, and install again…
Try to another pc or laptop…
The Following User Says Thank You to Panathaole For This Useful Post:

Inked (9th February, 2020)
9th February, 2020, 09:28 PM

#15

Originally Posted by Panathaole

Uninstall and remove the driver, and install again…
Try to another pc or laptop…

I have tried uninstalling and reinstalling it a few times including the driver, although I have read that some people need to install it a couple of times to get it to work.

The fact I’m getting crash errors from windows is making me think it could be a driver issue.

Источник

People have succeeded to run Fgtech Galletto V54 firmware 0475 software on Windows 7, Windows 8 and Windows 10. For firmware 0475 only, didn’t test on firmware 0386.

Credit to all contributors: obdii365.com, 306 t16, nusa1979

Install Fgtech 0475 on Windows 7

Install Fgtech 0475 on Windows 8

Install Fgtech 0475 on Windows 10

Fgtech 0475 Windows 7 Installation

Windows 7 32bit/64bit

FGTECH Galletto v54 (fw 0475) EU clone Software Free Download :

https://mega.nz/#!zNJXXCSQ!gPd3TydWtvL9SHMtB2hotwUT01LDJ1BB6OBHr_71r_4

Open the folder “Program”, then open “V54 for 0475” to install fgtech v54 on Win7.

Copy “EVO.dll” and “mfc42.dll”

Right click on “icona.ico” on the desktop, select “Properties”, select “Open file location”.

Paste the “EVO.dll” and “mfc42.dll” to replace the same one.

Right click on “EOBD2”, choose “Properties”.

Select “Compatibility”, tick off “Run this program in compatibility mode for”.

Click on “Yes”.

Open device management, wait until the computer read out “FGTECH”, right click on it and choose “Update the driver program”.

View the computer to check the driver program (option 2).

Now you can find out USB FGTECH Driver.

Information: Windows Vista or above detected, making a second path.

Open “EOBD2 by F.g. technology 2012”

Click “Help“, you can get many user manual for reference.

For example, BDM MPC5xx user manual is very detailed on how to do step by step.

JTAG MPC55XX user manual is also available.

Win7 installation Video guide:

Fgtech 0475 Windows 8/Windows 8.1 Installation

After installation of the Fgtech 0475 Setup.exe in Windows 8, when you connect by USB the interface is possible that the PC don’t recognized since the drivers are not installed.
If you try to install manually the driver through the peripheral management it will appear the follow error message:

If it does not accept the drivers manually, you need to disable the control of the driver signing.

Follow the instructions below:

Restart the PC in Advanced Mode, so from the desktop, open the Charm Bar to the right and click on Change PC Settings:

Now it open the screened of the PC settings, click on General and then Restart now:

Click on the right Restart Now, the PC will restart in advanced mode.

After the restart with Windows 8, it will appear the following screen, click on Troubleshoot

Click on Advanced Options

Click Startup Settings
Click Restart

After the restart, at the screen below, press the button F7 that corresponds to
Disable driver signature enforcement

The PC will restart.
Now you can install the driver.

Fgtech 0475 Windows 10 64bit Installation

Free download fgtech 0475 software for Win10

Password : cooked2017

No crack needed
No more clock returning
Tested with several anti virus, anti malware, etc.
No viruses, malware etc.
Run on Win10 x64
No keygen needed
No serial needed
One click installation
After uninstall no files left behind
After installation, just connect your device and start the software.

For Fgtech galletto 0475 Windows 10 Install
Go in to recovery take advanced settings.. make Restart. after Windows goes to Recovery options.

Click Troubleshooting-Advanced options-Startup Settings…. windows reboots

after reboots click F7-Disable driver signature….

windows reboot normal mode.. now you can install FgTech driver .

Test on VAG EDC16 and OPEL Delco without any issues. Working perfectly on Win10.
BMW E90 EDC17CP02/06 read/write working perfectly.

Источник

GALLETTO V 54

автомеханик

Диагност

Ремонт авто

автомеханик

Ремонт авто

Диагност

электрик

Диагност

автомеханик

Ремонт авто

Диагност

Вложения:

Диагност

Ремонт авто

Диагност

Автоэлектрик

диагност

диагност

ЧипТюнинг, диагностика, одометры, автоэлектрика.

летчик

рабочий

Электрик-диагност

Водитель автомобиля

Ремонт авто

Автомеханик

Теплотехник

<img decoding="async" onError="javascript: wp_broken_images = window.wp_broken_images || function(){}; wp_broken_images(this);" src="http://www.digital-kaos.co.uk/forums/images/icons/icon4.png" alt="Exclamation" /> FGTECH 0475 Won’t Boot

<img decoding="async" onError="javascript: wp_broken_images = window.wp_broken_images || function(){}; wp_broken_images(this);" src="http://www.digital-kaos.co.uk/forums/images/icons/icon1.png" alt="Default" />

The Following User Says Thank You to figani For This Useful Post:

<img decoding="async" onError="javascript: wp_broken_images = window.wp_broken_images || function(){}; wp_broken_images(this);" src="http://www.digital-kaos.co.uk/forums/images/icons/icon1.png" alt="Default" />

<img decoding="async" onError="javascript: wp_broken_images = window.wp_broken_images || function(){}; wp_broken_images(this);" src="http://www.digital-kaos.co.uk/forums/images/icons/icon1.png" alt="Default" />

The Following User Says Thank You to blackpirate For This Useful Post:

<img decoding="async" onError="javascript: wp_broken_images = window.wp_broken_images || function(){}; wp_broken_images(this);" src="http://www.digital-kaos.co.uk/forums/images/icons/icon1.png" alt="Default" />

<img decoding="async" onError="javascript: wp_broken_images = window.wp_broken_images || function(){}; wp_broken_images(this);" src="http://www.digital-kaos.co.uk/forums/images/icons/icon1.png" alt="Default" />

<img decoding="async" onError="javascript: wp_broken_images = window.wp_broken_images || function(){}; wp_broken_images(this);" src="http://www.digital-kaos.co.uk/forums/images/icons/icon1.png" alt="Default" />

<img decoding="async" onError="javascript: wp_broken_images = window.wp_broken_images || function(){}; wp_broken_images(this);" src="http://www.digital-kaos.co.uk/forums/images/icons/icon1.png" alt="Default" />

The Following User Says Thank You to zoki21 For This Useful Post:

<img decoding="async" onError="javascript: wp_broken_images = window.wp_broken_images || function(){}; wp_broken_images(this);" src="http://www.digital-kaos.co.uk/forums/images/icons/icon1.png" alt="Default" />

The Following User Says Thank You to zoki21 For This Useful Post:

<img decoding="async" onError="javascript: wp_broken_images = window.wp_broken_images || function(){}; wp_broken_images(this);" src="http://www.digital-kaos.co.uk/forums/images/icons/icon1.png" alt="Default" />

<img decoding="async" onError="javascript: wp_broken_images = window.wp_broken_images || function(){}; wp_broken_images(this);" src="http://www.digital-kaos.co.uk/forums/images/icons/icon1.png" alt="Default" />

The Following User Says Thank You to Panathaole For This Useful Post:

<img decoding="async" onError="javascript: wp_broken_images = window.wp_broken_images || function(){}; wp_broken_images(this);" src="http://www.digital-kaos.co.uk/forums/images/icons/icon1.png" alt="Default" />

<img decoding="async" onError="javascript: wp_broken_images = window.wp_broken_images || function(){}; wp_broken_images(this);" src="http://www.digital-kaos.co.uk/forums/images/icons/icon1.png" alt="Default" />

<img decoding="async" onError="javascript: wp_broken_images = window.wp_broken_images || function(){}; wp_broken_images(this);" src="http://www.digital-kaos.co.uk/forums/images/icons/icon1.png" alt="Default" />

The Following User Says Thank You to Panathaole For This Useful Post:

<img decoding="async" onError="javascript: wp_broken_images = window.wp_broken_images || function(){}; wp_broken_images(this);" src="http://www.digital-kaos.co.uk/forums/images/icons/icon1.png" alt="Default" />

FGTECH 0475 Won’t Boot