Заглушке переданы неправильные данные windows server 2012

• Remove From My Forums

Заглушке переданы неправильные данные

• Question

• Это сообщение выдается постоянно после обновления с windows 10 на winddows 10 RS, т.е. когда приложение требует для запуска повышенные привилегии — первый запуск — выдается
  сообщение про заглушку, второй запуск проходит нормально, ОС версия 1607 (сборка ОС 14393.479) корпоративной редакции, была установлена на рабочий ноутбук методом обновления
  предыдущей Windows 10 v1511 Корпоративная, с сохранением настроек и приложений. Как все таки передать этой заглушке правильные данные?)) 

Содержание

1. Заглушке переданы неправильные данные windows 10
2. Сообщение об ошибке при передаче типа variant между клиентом COM и COM-сервера в Windows: «0x800706F7 (Заглушке переданы неправильные данные)»
3. Симптомы
4. Причина
5. Решение
6. Сведения об исправлении
7. Предварительные условия
8. Необходимость перезагрузки
9. Сведения о замене исправлений
10. Сведения о файлах
11. Заглушка получила сообщение об ошибке неверных данных в Windows 10
12. Заглушка получила неверные данные
13. 1]Ошибка 1783: заглушка получила неверные данные.
14. 2]Заглушка получила ошибку неверных данных и проблемы с Почтой и Магазином Windows.
15. 3]Перезапустить приложение
16. 3]Общее решение
17. Заглушке переданы неправильные данные windows 10
18. Вопрос
19. Ответы
20. Все ответы
21. Windows 10. Обсуждение

Содержание

1. Windows server 2019 ошибка 1783 заглушке переданы неправильные данные
2. Вопрос
3. Ответы
4. Все ответы
5. Windows server 2019 ошибка 1783 заглушке переданы неправильные данные
6. Вопрос
7. Ответы
8. Все ответы

All replies

• Check the below article & if it doesn’t help you, provide more info about your infra(No fo Forest/domain, no of DC’s with their OS, SP level, sites & b/w, DFL/FFL level).

  http://support.microsoft.com/kb/2015644

  Also, post the complete & other relevant error message.

  Regards
   

  Awinish Vishwakarma| MY Blog
  

  Disclaimer: This posting is provided AS-IS with no warranties or guarantees and confers no rights.

• I have followed the the KB, no luck.

  1 domain, 1 DC Server 2008 standard edition 64 bit with sp2.

  The full error message:

  The Knowledge Consistency Checker (KCC) has detected that successive attempts to replicate with the following domain controller has consistently failed.

  Attempts:

  19

  Domain controller:

  CN=NTDS Settings,CN=ZABLVZN-DC01,CN=Servers,CN=Verizon,CN=Sites,CN=Configuration,DC=blue,DC=local

  Period of time (minutes):

  1047999

  The Connection object for this domain controller will be ignored, and a new temporary connection will be established to ensure that replication continues. Once replication with this domain controller resumes, the temporary connection will be removed.

  Additional Data

  Error value:

  1783 The stub received bad data.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

• I am also getting the following error while promoting:

  The local domain controller has not completed a full synchronization of the following directory partition. The local domain controller will not be advertised to clients by the domain controller locator service until this task is completed.

  Directory partition:

  DC=blue,DC=local

  An attempt to complete a full synchronization of this directory partition will be tried again later.

• Hello,

  have a look to this Microsoft article about such error:

  http://support.microsoft.com/kb/2028588

  ---

  This posting is provided «AS IS» with no warranties or guarantees , and confers no rights.

  Microsoft
  Student Partner
  Microsoft Certified Professional
  Microsoft Certified Systems Administrator: Security
  Microsoft Certified Systems Engineer: Security
  Microsoft Certified Technology Specialist: Windows Server 2008 Active Directory, Configuration
  Microsoft Certified Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration

  Microsoft
  Certified Technology Specialist: Windows Server 2008 Applications Infrastructure, Configuration

• This is a clean installed server and promoted to a DC, no extra installation/s on the server exeprt for backups and antivirus.

• Did you create a subnet for new dc & linked to appropriate site or its into same subnet as previous DC.

  Please check connectivity from both the DC & able to resolve each other name using nslookup.

  Type net share & verfiy sysvol & netlogon is shared on the new DC.

  Post unedited ipconfig /all from both the dc’s.

  Regards
   

  Awinish Vishwakarma| MY Blog
  

  Disclaimer: This posting is provided AS-IS with no warranties or guarantees and confers no rights.

• DC01:

  Windows IP Configuration. The servers are both in the same site, the subnets are present in the site. Yes, I am able to resolve each other using nslookup.

     Host Name . . . . . . . . . . . . : ZABLVZN-DC01
     Primary Dns Suffix  . . . . . . . : blue.local
     Node Type . . . . . . . . . . . . : Hybrid
     IP Routing Enabled. . . . . . . . : No
     WINS Proxy Enabled. . . . . . . . : No
     DNS Suffix Search List. . . . . . : blue.local

  Ethernet adapter Local Area Connection:

     Connection-specific DNS Suffix  . :
     Description . . . . . . . . . . . : Broadcom BCM5708C NetXtreme II GigE (NDIS
   VBD Client)
     Physical Address. . . . . . . . . : 00-19-B9-E2-8F-16
     DHCP Enabled. . . . . . . . . . . : No
     Autoconfiguration Enabled . . . . : Yes
     IPv4 Address. . . . . . . . . . . : 66.8.56.44(Preferred)
     Subnet Mask . . . . . . . . . . . : 255.255.255.0
     Default Gateway . . . . . . . . . : 66.8.56.253
     DNS Servers . . . . . . . . . . . : 66.8.56.44
     NetBIOS over Tcpip. . . . . . . . : Enabled

  Tunnel adapter Local Area Connection* 8:

     Media State . . . . . . . . . . . : Media disconnected
     Connection-specific DNS Suffix  . :
     Description . . . . . . . . . . . : isatap.{DFD01E40-1870-49A6-AC70-9D89BC7E3
  326}
     Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
     DHCP Enabled. . . . . . . . . . . : No
     Autoconfiguration Enabled . . . . : Yes

  Tunnel adapter Local Area Connection* 11:

     Connection-specific DNS Suffix  . :
     Description . . . . . . . . . . . : 6TO4 Adapter
     Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
     DHCP Enabled. . . . . . . . . . . : No
     Autoconfiguration Enabled . . . . : Yes
     IPv6 Address. . . . . . . . . . . : 2002:4208:382c::4208:382c(Preferred)
     Default Gateway . . . . . . . . . : 2002:c058:6301::c058:6301
     DNS Servers . . . . . . . . . . . : 66.8.56.44
     NetBIOS over Tcpip. . . . . . . . : Disabled

  Tunnel adapter Local Area Connection* 12:

     Media State . . . . . . . . . . . : Media disconnected
     Connection-specific DNS Suffix  . :
     Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
     Physical Address. . . . . . . . . : 02-00-54-55-4E-01
     DHCP Enabled. . . . . . . . . . . : No
     Autoconfiguration Enabled . . . . : Yes

  DC02:

  Windows IP Configuration

     Host Name . . . . . . . . . . . . : bluevznex03
     Primary Dns Suffix  . . . . . . . : blue.local
     Node Type . . . . . . . . . . . . : Unknown
     IP Routing Enabled. . . . . . . . : No
     WINS Proxy Enabled. . . . . . . . : No
     DNS Suffix Search List. . . . . . : blue.local

  Ethernet adapter 66.8.56.43:

     Connection-specific DNS Suffix  . :
     Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet #2
     Physical Address. . . . . . . . . : 00-17-A4-EC-F0-CA
     DHCP Enabled. . . . . . . . . . . : No
     IP Address. . . . . . . . . . . . : 66.8.56.43
     Subnet Mask . . . . . . . . . . . : 255.255.255.0
     Default Gateway . . . . . . . . . : 66.8.56.253
     DNS Servers . . . . . . . . . . . : 66.8.56.44

• I have followed the the KB, no luck.

  1 domain, 1 DC Server 2008 standard edition 64 bit with sp2.

  The full error message:

  The Knowledge Consistency Checker (KCC) has detected that successive attempts to replicate with the following domain controller has consistently failed.

  Attempts:

  19

  Domain controller:

  CN=NTDS Settings,CN=ZABLVZN-DC01,CN=Servers,CN=Verizon,CN=Sites,CN=Configuration,DC=blue,DC=local

  Period of time (minutes):

  1047999

  The Connection object for this domain controller will be ignored, and a new temporary connection will be established to ensure that replication continues. Once replication with this domain controller resumes, the temporary connection will be removed.

  Additional Data

  Error value:

  1783 The stub received bad data.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Have a look to this Microsoft article:

  http://www.microsoft.com/products/ee/transform.aspx?ProdName=Windows%20Operating%20System&ProdVer=5.2.3790.0&EvtID=1308&EvtSrc=NTDS%20KCC&FileVer=5.2.3790.0&FileName=ntdsmsg.dll&EvtType=Warning&LCID

  please use Microsoft Skydrive to upload the output of these commands on all your DCs:

  netdom query fsmo

  netdom query dc

  ipconfig /all >c:ipconfig.txt [from each DC/DNS Server]

  dcdiag /v /c /d /e /s:dcname >c:dcdiag.txt

  repadmin /showrepl dc* /verbose /all /intersite >c:repl.txt
   [«dc* is a place holder for the starting name of the DCs if they all begin the same (if more then one DC exists)]

  dnslint /ad /s «DCipaddress» (http://support.microsoft.com/kb/321045)

  ---

  This posting is provided «AS IS» with no warranties or guarantees , and confers no rights.

  Microsoft
  Student Partner
  Microsoft Certified Professional
  Microsoft Certified Systems Administrator: Security
  Microsoft Certified Systems Engineer: Security
  Microsoft Certified Technology Specialist: Windows Server 2008 Active Directory, Configuration
  Microsoft Certified Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration

  Microsoft
  Certified Technology Specialist: Windows Server 2008 Applications Infrastructure, Configuration

•   There are warning or error events within the last 24 hours after the

  
     SYSVOL has been shared. Failing SYSVOL replication problems may cause
  
     Group Policy problems. 

  Check event viewer for logged errors.

  ZABLVZN-DC01 failed test NCSecDesc

  Have a look to this thread:

  http://zkvkea.blu.livefilestore.com/y1pHIQsh9IF5f3TuLIFyZsYtAXOW2OwOmkqzedEIZAOxj3up3HMZuM1XH7euIDRGsPmVeCzl80NyYq3FGqkDWkhTQ/dcdiag.txt?psid=1

  Failed to delete the test record _dcdiag_test_record in zone blue.local

  Please use secure updates only on your domain DNS zones.

  There are no more endpoints available from the endpoint mapper

  Have a look to this Microsoft article:

  http://support.microsoft.com/kb/839880/en

  __________________________________________________________

  Please let your two DCs DNS servers and make sure that your zone is an AD integrated one. Once done, make sure that each DC points to itself as primary DNS server and to the other one as secondary one. After that, restart netlogon service on both DCs.

  Also, make sure that there is no firewall blocking traffic between both DCs. Disable all security softwares and check again.

  http://technet.microsoft.com/en-us/library/bb727063.aspx

  ---

  This posting is provided «AS IS» with no warranties or guarantees , and confers no rights.

  Microsoft
  Student Partner
  Microsoft Certified Professional
  Microsoft Certified Systems Administrator: Security
  Microsoft Certified Systems Engineer: Security
  Microsoft Certified Technology Specialist: Windows Server 2008 Active Directory, Configuration
  Microsoft Certified Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration

  Microsoft
  Certified Technology Specialist: Windows Server 2008 Applications Infrastructure, Configuration

• VerizonBLUEVZNEX03ADEL:2c52d94b-8a36-482e-a224-d25ad0680ead (deleted DSA) via RPC

   There are no more endpoints available from the endpoint mapper.

  VerizonZABLHQ-DC02ADEL:abde6e5d-a36c-498e-9fcf-070291e04f10 (deleted DSA) via RPC

  VerizonZABLVZNEXC02ADEL:38c053d1-7e37-4d0e-9944-41e31fc8a371 (deleted DSA) via RPC

  VerizonZABLHQ-DC01ADEL:f688d9d5-0f49-4ee1-b528-e7019f46552e (deleted DSA) via RPC
  VerizonZABLHQ-DC01ADEL:b84d6002-7d70-462d-8bed-78afd6f06ac2 (deleted DSA) via RPC
  VerizonZABLHQ-DC02ADEL:abde6e5d-a36c-498e-9fcf-070291e04f10 (deleted DSA) via RPC

  LynwoodADEL:e8f10dc9-8a4b-45f4-a388-540b2a46cbb0ZABLHQ-DC01ADEL:f616e21f-de09-4f11-8953-158bc542dfb8 (deleted DSA) via RPC

  The above error are taken from repadmin /showrepl, it looks to be above listed DC( ZABLHQ-DC02,ZABLVZNEXC02,ZABLHQ-DC01,BLUEVZNEX03)DC were removed & metadata cleanup were not performed. What happened to these DC’s.

  Apart from above, IPconfig report, i find public IP has been used for configuring DC, is there any reason for using public IP assigned for DC. Publishing your domain on internet or using public IP on DC is not the recommended practice from the security point.

  Disable all the NIC from the DC ZABLVZN-DC01 except one, because multihomed DC’s are not recommended. 

  In bluevznex03, add the secondary DNS IP to itself & when replication is completed, you can interchange.

  You need to perform metadata cleanup of removed DC, until you remove all the failed DC records from the AD, replication will not work. Problem of lingering object can’t be ignored too.

  Metadata cleanup for windows 2003

  http://www.petri.co.il/delete_failed_dcs_from_ad.htm

  Metadata cleanup for windows 2008

  http://technet.microsoft.com/en-us/library/cc816907%28WS.10%29.aspx

  It looks to be there is lingering object too in the forest.

  Lingering object issues

  http://social.technet.microsoft.com/Forums/en-US/winserverDS/thread/9f114f3f-e8ef-4ac6-846f-8e61d6324d9a

  For RPC endpoint mapper error, check the ports are open on the firewall.

  http://support.microsoft.com/kb/839880

  Regards

  Awinish Vishwakarma| MY Blog
  

  Disclaimer: This posting is provided AS-IS with no warranties or guarantees and confers no rights.

• Same error when I replicate:

  C:Documents and Settingsadm-nickyj>repadmin /showreps
  VerizonBLUEVZNEX03
  DC Options: (none)
  Site Options: (none)
  DC object GUID: e8dfb429-f7fd-4a9f-9679-eb068ddb04f7
  DC invocationID: de7adc56-84ee-46a1-a576-c7c46cb4d38e

  ==== INBOUND NEIGHBORS ======================================

  DC=blue,DC=local
      VerizonZABLVZN-DC01 via RPC
          DC object GUID: 933ef2e8-2f90-4ac3-8d5e-47a99030f7b5
          Last attempt @ 2011-04-21 10:44:06 failed, result 1783 (0x6f7):
              The stub received bad data.
          1 consecutive failure(s).
          Last success @ (never).

  CN=Configuration,DC=blue,DC=local
      VerizonZABLVZN-DC01 via RPC
          DC object GUID: 933ef2e8-2f90-4ac3-8d5e-47a99030f7b5
          Last attempt @ 2011-04-21 10:24:07 was successful.

  CN=Schema,CN=Configuration,DC=blue,DC=local
      VerizonZABLVZN-DC01 via RPC
          DC object GUID: 933ef2e8-2f90-4ac3-8d5e-47a99030f7b5
          Last attempt @ 2011-04-21 10:24:07 was successful.

• It replicated the schema and configuration without any issues. The secondary dc that I am adding does not replicate all the users and groups to. It only replicates about 560 items and then stops.

  When promoting the new dc it does not complete the full transfer of all the users and groups in dc-blue.dc=local. I then receive the error the stub received bad data.

• The reason for replication not working is presence of stale records in Domain directory parititon or lingering object in the domain. You need to follow the article posted for getting rid of failed DC records from the AD as well as dealing with lingering
  objects.

  Did you restore second DC from VM, image/snpashot or from old backup?

  Regards

  Awinish Vishwakarma| MY Blog
  

  Disclaimer: This posting is provided AS-IS with no warranties or guarantees and confers no rights.

• Please upload again the output of the commands I suggested previously on all DCs (all commands please).

  Also, please check that you don’t have blocked ports. Use PortQry v2 to check ports. Also, disable all security softwares.

  Have you deleted DCs without performing a metadata cleanup? If yes, please perform a metadata cleanup.

  Also, please mentioned how many DCs you have now and their FQDNs.

  ---

  This posting is provided «AS IS» with no warranties or guarantees , and confers no rights.

  Microsoft
  Student Partner
  Microsoft Certified Professional
  Microsoft Certified Systems Administrator: Security
  Microsoft Certified Systems Engineer: Security
  Microsoft Certified Technology Specialist: Windows Server 2008 Active Directory, Configuration
  Microsoft Certified Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration

  Microsoft
  Certified Technology Specialist: Windows Server 2008 Applications Infrastructure, Configuration

  • Edited by

    Thursday, April 21, 2011 9:10 AM
    add info

• I only have one DC now because I can’t promote any other dc’s. It will not allow transfer of all the users and groups. If I promote it the sysvol becomes available but there’s only 560 odd users on the new dc. Users can’t authenticate on mail etc. The error
  occures while promoting the new dc. I cleaned up metadata and retried promoting, no luck.

• If you are down to one dc you should run dcdiag again and then repost the results on skyDrive.  The forum can then eval the output for additional clues.

  —
  Paul Bergson
  MVP — Directory Services
  MCITP: Enterprise Administrator
  MCTS, MCT, MCSE, MCSA, Security+, BS CSci
  2008, Vista, 2003, 2000 (Early Achiever), NT4
  http://www.pbbergs.com    Twitter @pbbergs
  http://blogs.dirteam.com/blogs/paulbergson

  Please no e-mails, any questions should be posted in the NewsGroup. This
  posting is provided «AS IS» with no warranties, and confers no rights.

• I can replicate any new DC to the domain controller zablvzn-dc01 but nothing will replicate from the dc. No firewall blocking and no security software loaded on the server. The issu started about a week ago and I had to remove the other dc’s because if we
  create new users it will not replicate to other dc’s.

           [Replications Check,ZABLHQ-DC01] A recent replication attempt failed:

  From BLUEVZNEX03 to ZABLHQ-DC01

  Naming Context: DC=blue,DC=local

  The replication generated an error (1783):

  The stub received bad data.

  The failure occurred at 2011-04-11 05:58:54.

    The last success occurred at (never).

• The DC diag was done on the 11th, that’s when everything started. We haven’t installed a new firewall or anything like that, no changes loaded for software installations etc and no patch management done.

• Dcdiag show ok apart from adprep /rodcprep is not run & thats ok, but repadmin /showrepl show the data posted by me earlier, why these AD objects were appearing part of the domain.

  Can you post below report on skydrive

  Repadmin /syncall /APed >>c:syncall.log

  repadmin /showrepl dc* /verbose /all /intersite >c:repl.txt  [«dc* is a place holder for the starting name of the DCs if they all
  begin the same (if more then one DC exists)]

  Regards

  Awinish Vishwakarma| MY Blog
  

  Disclaimer: This posting is provided AS-IS with no warranties or guarantees and confers no rights.

• Added them to the skydrive.

• Dcdiag looks fine to me. I would recommend transfer everything(FSMO,DNS,DHCP) from DC
  ZABLVZN-DC01 to DC
  BLUEVZNEX03(this is working DC), demote the problem DC & promote it back. Make Bluevznex03 as GC too.
  

  If DNS is AD-Integrated, installing DNS service on other DC will make the server as DNS server too.
  

  FSMO role transfer

  http://www.petri.co.il/transferring_fsmo_roles.htm 

  Regards

  Awinish Vishwakarma| MY Blog
  

  Disclaimer: This posting is provided AS-IS with no warranties or guarantees and confers no rights.

  • Marked as answer by
    Brent Hu
    Tuesday, April 26, 2011 2:35 AM
  • Unmarked as answer by
    njooste
    Wednesday, August 15, 2012 1:43 PM

All replies

• Check the below article & if it doesn’t help you, provide more info about your infra(No fo Forest/domain, no of DC’s with their OS, SP level, sites & b/w, DFL/FFL level).

  http://support.microsoft.com/kb/2015644

  Also, post the complete & other relevant error message.

  Regards
   

  Awinish Vishwakarma| MY Blog
  

  Disclaimer: This posting is provided AS-IS with no warranties or guarantees and confers no rights.

• I have followed the the KB, no luck.

  1 domain, 1 DC Server 2008 standard edition 64 bit with sp2.

  The full error message:

  The Knowledge Consistency Checker (KCC) has detected that successive attempts to replicate with the following domain controller has consistently failed.

  Attempts:

  19

  Domain controller:

  CN=NTDS Settings,CN=ZABLVZN-DC01,CN=Servers,CN=Verizon,CN=Sites,CN=Configuration,DC=blue,DC=local

  Period of time (minutes):

  1047999

  The Connection object for this domain controller will be ignored, and a new temporary connection will be established to ensure that replication continues. Once replication with this domain controller resumes, the temporary connection will be removed.

  Additional Data

  Error value:

  1783 The stub received bad data.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

• I am also getting the following error while promoting:

  The local domain controller has not completed a full synchronization of the following directory partition. The local domain controller will not be advertised to clients by the domain controller locator service until this task is completed.

  Directory partition:

  DC=blue,DC=local

  An attempt to complete a full synchronization of this directory partition will be tried again later.

• Hello,

  have a look to this Microsoft article about such error:

  http://support.microsoft.com/kb/2028588

  ---

  This posting is provided «AS IS» with no warranties or guarantees , and confers no rights.

  Microsoft
  Student Partner
  Microsoft Certified Professional
  Microsoft Certified Systems Administrator: Security
  Microsoft Certified Systems Engineer: Security
  Microsoft Certified Technology Specialist: Windows Server 2008 Active Directory, Configuration
  Microsoft Certified Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration

  Microsoft
  Certified Technology Specialist: Windows Server 2008 Applications Infrastructure, Configuration

• This is a clean installed server and promoted to a DC, no extra installation/s on the server exeprt for backups and antivirus.

• Did you create a subnet for new dc & linked to appropriate site or its into same subnet as previous DC.

  Please check connectivity from both the DC & able to resolve each other name using nslookup.

  Type net share & verfiy sysvol & netlogon is shared on the new DC.

  Post unedited ipconfig /all from both the dc’s.

  Regards
   

  Awinish Vishwakarma| MY Blog
  

  Disclaimer: This posting is provided AS-IS with no warranties or guarantees and confers no rights.

• DC01:

  Windows IP Configuration. The servers are both in the same site, the subnets are present in the site. Yes, I am able to resolve each other using nslookup.

     Host Name . . . . . . . . . . . . : ZABLVZN-DC01
     Primary Dns Suffix  . . . . . . . : blue.local
     Node Type . . . . . . . . . . . . : Hybrid
     IP Routing Enabled. . . . . . . . : No
     WINS Proxy Enabled. . . . . . . . : No
     DNS Suffix Search List. . . . . . : blue.local

  Ethernet adapter Local Area Connection:

     Connection-specific DNS Suffix  . :
     Description . . . . . . . . . . . : Broadcom BCM5708C NetXtreme II GigE (NDIS
   VBD Client)
     Physical Address. . . . . . . . . : 00-19-B9-E2-8F-16
     DHCP Enabled. . . . . . . . . . . : No
     Autoconfiguration Enabled . . . . : Yes
     IPv4 Address. . . . . . . . . . . : 66.8.56.44(Preferred)
     Subnet Mask . . . . . . . . . . . : 255.255.255.0
     Default Gateway . . . . . . . . . : 66.8.56.253
     DNS Servers . . . . . . . . . . . : 66.8.56.44
     NetBIOS over Tcpip. . . . . . . . : Enabled

  Tunnel adapter Local Area Connection* 8:

     Media State . . . . . . . . . . . : Media disconnected
     Connection-specific DNS Suffix  . :
     Description . . . . . . . . . . . : isatap.{DFD01E40-1870-49A6-AC70-9D89BC7E3
  326}
     Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
     DHCP Enabled. . . . . . . . . . . : No
     Autoconfiguration Enabled . . . . : Yes

  Tunnel adapter Local Area Connection* 11:

     Connection-specific DNS Suffix  . :
     Description . . . . . . . . . . . : 6TO4 Adapter
     Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
     DHCP Enabled. . . . . . . . . . . : No
     Autoconfiguration Enabled . . . . : Yes
     IPv6 Address. . . . . . . . . . . : 2002:4208:382c::4208:382c(Preferred)
     Default Gateway . . . . . . . . . : 2002:c058:6301::c058:6301
     DNS Servers . . . . . . . . . . . : 66.8.56.44
     NetBIOS over Tcpip. . . . . . . . : Disabled

  Tunnel adapter Local Area Connection* 12:

     Media State . . . . . . . . . . . : Media disconnected
     Connection-specific DNS Suffix  . :
     Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
     Physical Address. . . . . . . . . : 02-00-54-55-4E-01
     DHCP Enabled. . . . . . . . . . . : No
     Autoconfiguration Enabled . . . . : Yes

  DC02:

  Windows IP Configuration

     Host Name . . . . . . . . . . . . : bluevznex03
     Primary Dns Suffix  . . . . . . . : blue.local
     Node Type . . . . . . . . . . . . : Unknown
     IP Routing Enabled. . . . . . . . : No
     WINS Proxy Enabled. . . . . . . . : No
     DNS Suffix Search List. . . . . . : blue.local

  Ethernet adapter 66.8.56.43:

     Connection-specific DNS Suffix  . :
     Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet #2
     Physical Address. . . . . . . . . : 00-17-A4-EC-F0-CA
     DHCP Enabled. . . . . . . . . . . : No
     IP Address. . . . . . . . . . . . : 66.8.56.43
     Subnet Mask . . . . . . . . . . . : 255.255.255.0
     Default Gateway . . . . . . . . . : 66.8.56.253
     DNS Servers . . . . . . . . . . . : 66.8.56.44

• I have followed the the KB, no luck.

  1 domain, 1 DC Server 2008 standard edition 64 bit with sp2.

  The full error message:

  The Knowledge Consistency Checker (KCC) has detected that successive attempts to replicate with the following domain controller has consistently failed.

  Attempts:

  19

  Domain controller:

  CN=NTDS Settings,CN=ZABLVZN-DC01,CN=Servers,CN=Verizon,CN=Sites,CN=Configuration,DC=blue,DC=local

  Period of time (minutes):

  1047999

  The Connection object for this domain controller will be ignored, and a new temporary connection will be established to ensure that replication continues. Once replication with this domain controller resumes, the temporary connection will be removed.

  Additional Data

  Error value:

  1783 The stub received bad data.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Have a look to this Microsoft article:

  http://www.microsoft.com/products/ee/transform.aspx?ProdName=Windows%20Operating%20System&ProdVer=5.2.3790.0&EvtID=1308&EvtSrc=NTDS%20KCC&FileVer=5.2.3790.0&FileName=ntdsmsg.dll&EvtType=Warning&LCID

  please use Microsoft Skydrive to upload the output of these commands on all your DCs:

  netdom query fsmo

  netdom query dc

  ipconfig /all >c:ipconfig.txt [from each DC/DNS Server]

  dcdiag /v /c /d /e /s:dcname >c:dcdiag.txt

  repadmin /showrepl dc* /verbose /all /intersite >c:repl.txt
   [«dc* is a place holder for the starting name of the DCs if they all begin the same (if more then one DC exists)]

  dnslint /ad /s «DCipaddress» (http://support.microsoft.com/kb/321045)

  ---

  This posting is provided «AS IS» with no warranties or guarantees , and confers no rights.

  Microsoft
  Student Partner
  Microsoft Certified Professional
  Microsoft Certified Systems Administrator: Security
  Microsoft Certified Systems Engineer: Security
  Microsoft Certified Technology Specialist: Windows Server 2008 Active Directory, Configuration
  Microsoft Certified Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration

  Microsoft
  Certified Technology Specialist: Windows Server 2008 Applications Infrastructure, Configuration

•   There are warning or error events within the last 24 hours after the

  
     SYSVOL has been shared. Failing SYSVOL replication problems may cause
  
     Group Policy problems. 

  Check event viewer for logged errors.

  ZABLVZN-DC01 failed test NCSecDesc

  Have a look to this thread:

  http://zkvkea.blu.livefilestore.com/y1pHIQsh9IF5f3TuLIFyZsYtAXOW2OwOmkqzedEIZAOxj3up3HMZuM1XH7euIDRGsPmVeCzl80NyYq3FGqkDWkhTQ/dcdiag.txt?psid=1

  Failed to delete the test record _dcdiag_test_record in zone blue.local

  Please use secure updates only on your domain DNS zones.

  There are no more endpoints available from the endpoint mapper

  Have a look to this Microsoft article:

  http://support.microsoft.com/kb/839880/en

  __________________________________________________________

  Please let your two DCs DNS servers and make sure that your zone is an AD integrated one. Once done, make sure that each DC points to itself as primary DNS server and to the other one as secondary one. After that, restart netlogon service on both DCs.

  Also, make sure that there is no firewall blocking traffic between both DCs. Disable all security softwares and check again.

  http://technet.microsoft.com/en-us/library/bb727063.aspx

  ---

  This posting is provided «AS IS» with no warranties or guarantees , and confers no rights.

  Microsoft
  Student Partner
  Microsoft Certified Professional
  Microsoft Certified Systems Administrator: Security
  Microsoft Certified Systems Engineer: Security
  Microsoft Certified Technology Specialist: Windows Server 2008 Active Directory, Configuration
  Microsoft Certified Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration

  Microsoft
  Certified Technology Specialist: Windows Server 2008 Applications Infrastructure, Configuration

• VerizonBLUEVZNEX03ADEL:2c52d94b-8a36-482e-a224-d25ad0680ead (deleted DSA) via RPC

   There are no more endpoints available from the endpoint mapper.

  VerizonZABLHQ-DC02ADEL:abde6e5d-a36c-498e-9fcf-070291e04f10 (deleted DSA) via RPC

  VerizonZABLVZNEXC02ADEL:38c053d1-7e37-4d0e-9944-41e31fc8a371 (deleted DSA) via RPC

  VerizonZABLHQ-DC01ADEL:f688d9d5-0f49-4ee1-b528-e7019f46552e (deleted DSA) via RPC
  VerizonZABLHQ-DC01ADEL:b84d6002-7d70-462d-8bed-78afd6f06ac2 (deleted DSA) via RPC
  VerizonZABLHQ-DC02ADEL:abde6e5d-a36c-498e-9fcf-070291e04f10 (deleted DSA) via RPC

  LynwoodADEL:e8f10dc9-8a4b-45f4-a388-540b2a46cbb0ZABLHQ-DC01ADEL:f616e21f-de09-4f11-8953-158bc542dfb8 (deleted DSA) via RPC

  The above error are taken from repadmin /showrepl, it looks to be above listed DC( ZABLHQ-DC02,ZABLVZNEXC02,ZABLHQ-DC01,BLUEVZNEX03)DC were removed & metadata cleanup were not performed. What happened to these DC’s.

  Apart from above, IPconfig report, i find public IP has been used for configuring DC, is there any reason for using public IP assigned for DC. Publishing your domain on internet or using public IP on DC is not the recommended practice from the security point.

  Disable all the NIC from the DC ZABLVZN-DC01 except one, because multihomed DC’s are not recommended. 

  In bluevznex03, add the secondary DNS IP to itself & when replication is completed, you can interchange.

  You need to perform metadata cleanup of removed DC, until you remove all the failed DC records from the AD, replication will not work. Problem of lingering object can’t be ignored too.

  Metadata cleanup for windows 2003

  http://www.petri.co.il/delete_failed_dcs_from_ad.htm

  Metadata cleanup for windows 2008

  http://technet.microsoft.com/en-us/library/cc816907%28WS.10%29.aspx

  It looks to be there is lingering object too in the forest.

  Lingering object issues

  http://social.technet.microsoft.com/Forums/en-US/winserverDS/thread/9f114f3f-e8ef-4ac6-846f-8e61d6324d9a

  For RPC endpoint mapper error, check the ports are open on the firewall.

  http://support.microsoft.com/kb/839880

  Regards

  Awinish Vishwakarma| MY Blog
  

  Disclaimer: This posting is provided AS-IS with no warranties or guarantees and confers no rights.

• Same error when I replicate:

  C:Documents and Settingsadm-nickyj>repadmin /showreps
  VerizonBLUEVZNEX03
  DC Options: (none)
  Site Options: (none)
  DC object GUID: e8dfb429-f7fd-4a9f-9679-eb068ddb04f7
  DC invocationID: de7adc56-84ee-46a1-a576-c7c46cb4d38e

  ==== INBOUND NEIGHBORS ======================================

  DC=blue,DC=local
      VerizonZABLVZN-DC01 via RPC
          DC object GUID: 933ef2e8-2f90-4ac3-8d5e-47a99030f7b5
          Last attempt @ 2011-04-21 10:44:06 failed, result 1783 (0x6f7):
              The stub received bad data.
          1 consecutive failure(s).
          Last success @ (never).

  CN=Configuration,DC=blue,DC=local
      VerizonZABLVZN-DC01 via RPC
          DC object GUID: 933ef2e8-2f90-4ac3-8d5e-47a99030f7b5
          Last attempt @ 2011-04-21 10:24:07 was successful.

  CN=Schema,CN=Configuration,DC=blue,DC=local
      VerizonZABLVZN-DC01 via RPC
          DC object GUID: 933ef2e8-2f90-4ac3-8d5e-47a99030f7b5
          Last attempt @ 2011-04-21 10:24:07 was successful.

• It replicated the schema and configuration without any issues. The secondary dc that I am adding does not replicate all the users and groups to. It only replicates about 560 items and then stops.

  When promoting the new dc it does not complete the full transfer of all the users and groups in dc-blue.dc=local. I then receive the error the stub received bad data.

• The reason for replication not working is presence of stale records in Domain directory parititon or lingering object in the domain. You need to follow the article posted for getting rid of failed DC records from the AD as well as dealing with lingering
  objects.

  Did you restore second DC from VM, image/snpashot or from old backup?

  Regards

  Awinish Vishwakarma| MY Blog
  

  Disclaimer: This posting is provided AS-IS with no warranties or guarantees and confers no rights.

• Please upload again the output of the commands I suggested previously on all DCs (all commands please).

  Also, please check that you don’t have blocked ports. Use PortQry v2 to check ports. Also, disable all security softwares.

  Have you deleted DCs without performing a metadata cleanup? If yes, please perform a metadata cleanup.

  Also, please mentioned how many DCs you have now and their FQDNs.

  ---

  This posting is provided «AS IS» with no warranties or guarantees , and confers no rights.

  Microsoft
  Student Partner
  Microsoft Certified Professional
  Microsoft Certified Systems Administrator: Security
  Microsoft Certified Systems Engineer: Security
  Microsoft Certified Technology Specialist: Windows Server 2008 Active Directory, Configuration
  Microsoft Certified Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration

  Microsoft
  Certified Technology Specialist: Windows Server 2008 Applications Infrastructure, Configuration

  • Edited by

    Thursday, April 21, 2011 9:10 AM
    add info

• I only have one DC now because I can’t promote any other dc’s. It will not allow transfer of all the users and groups. If I promote it the sysvol becomes available but there’s only 560 odd users on the new dc. Users can’t authenticate on mail etc. The error
  occures while promoting the new dc. I cleaned up metadata and retried promoting, no luck.

• If you are down to one dc you should run dcdiag again and then repost the results on skyDrive.  The forum can then eval the output for additional clues.

  —
  Paul Bergson
  MVP — Directory Services
  MCITP: Enterprise Administrator
  MCTS, MCT, MCSE, MCSA, Security+, BS CSci
  2008, Vista, 2003, 2000 (Early Achiever), NT4
  http://www.pbbergs.com    Twitter @pbbergs
  http://blogs.dirteam.com/blogs/paulbergson

  Please no e-mails, any questions should be posted in the NewsGroup. This
  posting is provided «AS IS» with no warranties, and confers no rights.

• I can replicate any new DC to the domain controller zablvzn-dc01 but nothing will replicate from the dc. No firewall blocking and no security software loaded on the server. The issu started about a week ago and I had to remove the other dc’s because if we
  create new users it will not replicate to other dc’s.

           [Replications Check,ZABLHQ-DC01] A recent replication attempt failed:

  From BLUEVZNEX03 to ZABLHQ-DC01

  Naming Context: DC=blue,DC=local

  The replication generated an error (1783):

  The stub received bad data.

  The failure occurred at 2011-04-11 05:58:54.

    The last success occurred at (never).

• The DC diag was done on the 11th, that’s when everything started. We haven’t installed a new firewall or anything like that, no changes loaded for software installations etc and no patch management done.

• Dcdiag show ok apart from adprep /rodcprep is not run & thats ok, but repadmin /showrepl show the data posted by me earlier, why these AD objects were appearing part of the domain.

  Can you post below report on skydrive

  Repadmin /syncall /APed >>c:syncall.log

  repadmin /showrepl dc* /verbose /all /intersite >c:repl.txt  [«dc* is a place holder for the starting name of the DCs if they all
  begin the same (if more then one DC exists)]

  Regards

  Awinish Vishwakarma| MY Blog
  

  Disclaimer: This posting is provided AS-IS with no warranties or guarantees and confers no rights.

• Added them to the skydrive.

• Dcdiag looks fine to me. I would recommend transfer everything(FSMO,DNS,DHCP) from DC
  ZABLVZN-DC01 to DC
  BLUEVZNEX03(this is working DC), demote the problem DC & promote it back. Make Bluevznex03 as GC too.
  

  If DNS is AD-Integrated, installing DNS service on other DC will make the server as DNS server too.
  

  FSMO role transfer

  http://www.petri.co.il/transferring_fsmo_roles.htm 

  Regards

  Awinish Vishwakarma| MY Blog
  

  Disclaimer: This posting is provided AS-IS with no warranties or guarantees and confers no rights.

  • Marked as answer by
    Brent Hu
    Tuesday, April 26, 2011 2:35 AM
  • Unmarked as answer by
    njooste
    Wednesday, August 15, 2012 1:43 PM